Compare

Bauder Activator-Primer (Canister) APR01 - Black

Name: Bauder Activator-Primer (Canister) APR01 - Black
Brand: Bauder Ltd
SKU: 9ZyKsppR183EiiWr8GmPTB

Verified by manufacturer 3 months ago

Bauder Ltd

Spray applied synthetic rubber primer.

Jump to:

Request BIM

+44 (0)1473 257671 Website

Application

Suitable substrates and bonding applications:

As primer:

OSB, plywood or timber.
Metal.
Existing asphalt and bitumen membranes.

As foil-to-foil contact adhesive:

FA-TE to FA-TE, FA Tapered to FA-TE, FA to FA Insulations.
FA Insulation to KSD Foil.

As membrane contact adhesive:

Fleece-backed Thermofol membrane to insulation or deck.
Thermoplan (FB and non-FB) membrane to insulation or deck.

Other areas of use for bonding:

Onto insulation facing prior to installing bituminous self-adhesive membranes.
Onto underlayer as an activator in flame-free applications.
All types of angle fillets.
Ridge and Valley Infills to FA G16 Tapered insulation.

Non-suitable substrates:

As a primer onto Concrete, lightweight concrete or cementitious materials – new build or refurbishment.
Bonding insulation to mica faced AVCL – e.g., FA-TE to KSD FBS.
Bonding laminated paper-foil faced insulation to AVCL or to itself.
Bonding EPS or XPS insulations.
Bonding BauderROCK or BauderGLAS insulation or Mineral Wool insulation or proprietary alternatives to AVCL or and each other.
Non-fleece backed Thermofol to deck or insulation facing.

Only to be used as part of a full Bauder Waterproofing System.

Please contact Bauder Technical Department if you require any further suitabilities confirmed.

Description

Synthetic rubber resin-based non-flammable material specifically developed to provide the necessary preparation of substrates, insulations and underlayers prior to the installation of self-adhesive membranes. The product can be used with torch-on membranes, and can also be used as a foil contact adhesive and fleece-backed membrane adhesive.

Features and benefits:

Non-flammable.
One canister.
One product can do multiple tasks – primer, activator, adhesive, etc.
Reduction in waste due to having less different adhesives.
Quick and easy application.
Primes most substrates.
50% quicker than a roller.
Helps adhesion in colder temperatures down to zero degrees.
Better adhesion of underlayer without need for additional heat.
Will pull underlayer into insulation tighter, removing unsightly wrinkles and air-pockets.
No Hot Works – flame-free applications improved.
Approx. 5-to-10-minute drying time.
Advantage on smaller adhered projects for single ply (assuming DBR 06 or KSD Foil are used).

General information

Color	Black
Material	Rubber

Uniclass	Pr_35_31_66_57 Non-bituminous primersPrimary Pr_20_31_02_57 Non-bitumen-based bonding compounds
CAWS	J42/325 Adhesive J31/310 Primer J42/320 Primer J41/325 Bonding compound J41/320 Primer

SKU Code	GB 60300120

Specification data - Non-bituminous primers

Classification data
Composition	Solvent based, synthetic rubber.
Colour	Black.
Application temperature	5-30ºC. Guidance for specification option: Where the temperature falls outside of this, please refer to Summer & Winter Advice documents from Bauder.
Drying time	5-10 minutes. Guidance for specification option: At 10°C.
Cleaner	Spray Gun Nozzle Cleaner.
Shelf life	12 months.
CoverageArea	75-150 m². Guidance for specification option: Primer and activator: 75 m² for two coats, 150 m² for one coat. Foil-to-foil adhesive: 75m² for perimeter zones, 100m² for field area (as calculated to BS EN 1991-1-4). Membrane adhesive: 75m².
Recoating time	4 hours. Guidance for specification option: If left exposed.