AxxessLine - Horizontal Safety Lifeline - Safety Line System
Verified by manufacturer 3 months ago
For trapezoidal roofing
For trapezoidal roofing
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
8 mm cable-based horizontal lifeline system providing users with a total fall protection solution through continuous attachment whilst negotiating intermediate points along the system.
Application
Suitable for all Kingspan roof types including standing seam, composite, built up, secret fix, trapezoidal and membrane roofs; conforms to EN 795:2012 and CEN/TS 16415:2013 Types A & C.
Description
8 mm cable-based horizontal lifeline system providing users with a total fall protection solution through continuous attachment whilst negotiating intermediate points along the system.
Features and benefits:
- Users can detach and re-attach at any point.
- Designed so that it is able to accommodate corners and various building shapes; aesthetically flexible, with low profile posts and comprehensive fixing options.
- Operates horizontally and can also be used as a single point system and a single point Type A anchor.
- Fall arrest and fall restraint.
- Complete 360° freedom of movement.
- Permanently attached to the structure.
- Corrosion-free.
- Incorporates force absorption technology to minimize the loading passed to the structure in the event of a fall.
- Computer calculation service available.
- Independently tested by SATRA to EN 795:2012 and CEN/TS 16415:2013 for a variety of installation types.
General information
Color | Silver |
Finish | Metallic |
Material | Stainless steel Polyurethane (PUR) Aluminium |
Shape | Rectangle Other |
Length | Bespoke |
Width | Bespoke |
Height | 230 mm |
Warranty description | 25 year |
Uniclass | |
CAWS | N25/220 Single point anchorage devices N25/20 Single point anchorage devices N25/210 Personal fall protection equipment N25/10 Personal fall protection equipment |
Specification data - Guided type fall arrest systems
System performance | Three users. |
Pre-installation survey | Suitability of structure and fabric |
Structural anchors | AL-1001-EC PVC post and base - end and corner.AL-1001-IN PVC post and base - intermediate.AL-1003-EC top fix post and base - end and corner.AL-1003-IN top fix post and base - intermediate.AL-1003A-EC top fix post and base - end and corner.AL-1003A-IN top fix post and base - intermediate.Manufacturer guidanceInclude drawing/ schedule as required. See also Ancillary equipment below, and Anchor fixing to suit substrate. |
Anchor line | 8 mm stainless steel cable.Guidance for specification option: 7x7, grade 316. Breaking strength: 37 kN. |
Ancillary equipment | AL-3001 AxxessLine traveller.Guidance for specification option: The only approved anchorage device for the AxxessLine® Horizontal System. AL-2001 swage end tensioner.Guidance for specification option: An adjustable tensioner unit is provided to take up the excess slack in the cable, once installation is complete. AL-2002 swage end.Guidance for specification option: A swaged fork terminal unit to finish the cable allowing it to be attached to the anchorage ring. AL-2003 intermediate cable guide.Guidance for specification option: Principal cable guide. AL-2004 long tail variable cable guide.Guidance for specification option: Can be adapted giving a cable deviation of up to 45°. AL-2006 end anchor ring.Guidance for specification option: For use with every system; provides the termination for the system and attachment for the tensioner and fork units, or as the anchor on a single anchorage post. AL-2008 single anchor post mounted corner unit.Guidance for specification option: Designed to turn the direction of the cable through 90° horizontally and is designed to be installed on the AxxessLine Anchorage Posts. AL-2009 angled thro plate.Guidance for specification option: To provide an anchorage for a T-system from a post with intermediate bracket. Helps reduce the amount of posts in a system and therefore the number of penetrations required. Can be used with either an intermediate and end, a variable corner and end, or two ends. AL-2011 swage joiner.Guidance for specification option: When a system is required to be repaired, or the cable lengthened then the Swage Joiner is used to connect two ends of separate cable lengths to provide a continuous run for the traveller to navigate. AL-2013 anchorage cable strop.Guidance for specification option: To allow access to systems mounted back from the edge an anchorage strop can be used in conjunction with the correct PPE. |
Anchor fixing | AL-4005 9 mm bulb type rivets. Guidance for specification option: For fixing to trapezoidal roofs. Other. Guidance for specification option: Insert requirements. |
Compatibility | Trapezoidal roofing. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 486 kg CO₂ eq/kg Self declared |
Recyclability | 100% |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Third party certifications
ISO 45001 Health and Safety Management
ISO 45001:2018
ISO 9001 Quality Management
ISO 9001:2015
Literature
AxxessLine Declaration of Conformity
AxxessLine - Horizontal Lifeline for Kingspan Roofing Systems
AxxessLine - Installation Manual
AxxessLine - Kingspan Roofing Systems Applications
AxxessLine Technical Manual
Axxess100 - Kingspan Recommended Supplier Products
AxxessLine Initial Specification
Case studies
Lanchester Wines - AxxessLine & Kingspan PowerPanel