NBS Source
I'm a manufacturer
Compare variants

Application

Suitable where penetration or transition exists in the building envelop creating a thermal bridge:

  • Parapets.
  • Slab/ floor edge.
  • Column base.
  • Roof penetrations.
  • Custom windowsills.
  • Roof edge.
  • Slab to foundation.
  • Foundation to wall.
  • Concrete balconies.
  • Custom moulding for over-insulating.

Description

Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Armatherm™ 500 thermal break material significantly reduces energy lost from thermal bridging in building envelope connections. It is a high strength, polyurethane material made in several densities to support a wide range of loading conditions. Due to it’s closed cell structure, it does not absorb water or moisture and has limited creep under continuous load.


Features and benefits:

  • Exceptional insulator.
  • High compressive strength, allowing it to be employed supporting large compressive loads with little deflection.
  • Offers economical, code-required compliance for cold room column base applications.
  • Reduces energy consumption and potential condensation issues.
  • Can support and transfer loads up to 17.2 N/mm² while providing minimal energy loss.
  • Available in multiple thicknesses and can be bonded to create increased thicknesses to achieve a specific R value.
  • Manufactured from ultra-high density rigid polyurethane blocks.

General information

Color

Green

Yellow

Cream

Grey

Material

Polyurethane

Shape

Rectangle

Length

2000 mm

Width

1000 mm

Height

5 mm

10 mm

12 mm

15 mm

20 mm

Show more

Uniclass

Pr_35_90_15_89 Thermal break connection platesPrimary

CAWS

E40/448 Thermal break connection plates

G10/395 Thermal break connection plates

E40/445 Insulating load transfer systems

E40/445 Insulating load transfer systems

E40/440 Load transfer systems

Specification data - Thermal break connection plates

Material

High strength, polyurethane.

Dimensions

-

Length

2000 mm.

Width

1000 mm.

Thickness (maximum)

250 mm.

Guidance for specification option:

  • Standard thicknesses: 5, 10, 12, 15, 20, 25 and 50 mm.
  • Can be bonded to create 150, 200 and 250 mm thicknesses.
  • Insert requirements.

Thickness (minimum)

5 mm.

Compressive stress (maximum)

65 N/mm².

Manufacturer guidance

Compressive Modulus.

Operating temperature (maximum)

80℃.

Operating temperature (minimum)

-185℃.

CompressiveStrength

2.0 N/mm².

R-Value

4.60.

Manufacturer guidance

er 25 mm of thickness.

Thermal conductivity (maximum)

0.031 W/m·K.

Literature

Armatherm 500 - Structural Thermal Break Material

Armatherm 500 - Structural Thermal Break Material

Similar products from Armatherm, a Brand of Armadillo Noise & Vibration Limited

Armatherm™  FRR Structural Thermal Break Plate

Armatherm™ FRR Structural Thermal Break Plate