Arbomeric MP10

Description

A one part, low modulus, modified polymer sealant which cures, on exposure to moisture vapour, to form an elastic rubber.

Recommended for use in many applications, including perimeter sealing in curtain walling and polyester powder coated frames, structural joints in brickwork and blockwork, and joints in lightweight cladding.

Not recommended for floor joints.

General information

Uniclass 2015

Pr_30_31_76_16 Construction joint sealantsPrimary

CAWS

H11/775 Bonding sealants for structural sealant/ bonded glazing

Product range

Modified Polymer Sealants

Specification data - Construction joint sealants

Product Reference

Arbomeric MP10

Colour

Black

Buff

Grey

Limestone

Portland

White

Accessories

None

Arbo Primer 2650

Arbo Cleaner No. 16

Alcohol Based.

Arbo Cleaner No.17

Xylene based, not suitable for use with plastics or delicate finishes.

Standard product features

Technical Data:

  • Skin time at 20º C and 65% relative humidity: 30 minutes.
  • Application temperature: + 5º C to + 35º C.
  • Service temperature: - 40º C to + 90º C.
  • Typical Shore A Hardness: 30.
  • Cure rate at 20º C and 65% relative humidity: 1-2 mm per 24 hours.
  • UV resistance: Very good.
  • Service life: 20+ years.
  • Chemical Resistance: Resistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion.

Movement Accommodation:

  • Butt joints (movement in tension and compression): 70%. Must not exceed ± 33% in any one direction.
  • Lap joints (movement in shear): 125%. Must not exceed ± 66% in any one direction.
  • Modulus at 100% extension: 0.29 N/mm².
  • Ultimate elongation: 550%.
  • Tensile strength at break: 0.45 N/mm².

Joint sizes:

Width:

  • Minimum: 6 mm.
  • Maximum: 25 mm (single application).
  • Maximum: 35 mm (multiple applications).

Depth:

  • Minimum: 10 mm on porous substrates; 6 mm on non-porous substrates.
  • Maximum: 18 mm.

Width: Depth ratio (within above minimum/ maximum restrictions):

  • Butt joints: 2:1.
  • Lap joints: 1:1.

Similar products from Carlisle Construction Materials Limited

Arbo 2020

Arbo 2020

Arbokol 1025 SP

Arbokol 1025 SP

Arbokol Secure

Arbomeric MP20

Arbomeric MP20

Arbomeric MP60

Arbomeric MP60