Application

Prisons – perimeter sealing of cell doors and windows, Prisons – sealing of fixings and sanitary ware, anti pick/ anti vandalism joints, heavy duty floor joints, tile to tile joints (no primer required), shower rooms. Not recommended for structural joints.

Description

Arbokol Secure is a unique two part epoxy sealant which cures to form a hard wearing seal, designed to accommodate small amounts of movement in extension but considerable movement in compression. Recommended for use in a variety of internal stress relief joint systems where a tough, non-pick seal is required.

Where applicable, an appropriate joint filler, e.g. closed cell polyethylene foam should be used to provide the correct joint depth. All joint preparation and sealant application should be carried out in accordance with BS 8000-16 (British Standard for the sealing of joints in buildings).

Applications:

Prisons – perimeter sealing of cell doors and windows, Prisons – sealing of fixings and sanitary ware, anti pick/ anti vandalism joints, heavy duty floor joints, tile to tile joints (no primer required), shower rooms. Not recommended for structural joints.

Recommended accessories:

  • Arbo Cleaner No. 17 (Xylene based – not suitable for use with plastics or delicate finishes).
  • Arbo Cleaner No. 16 (Alcohol based).

General information

Uniclass 2015

Pr_30_31_76_16 Construction joint sealantsPrimary

CAWS

L10/75 Sealant joints

L10/810 Sealant joints

L20/80 Sealant joints

L20/820 Sealant joints

Product range

Epoxy Sealants

Specification data - Construction joint sealants

Product Reference

Arbokol Secure

Colour

Grey

White

Product Options

Joint size suitability:

- Joint width:

  • Minimum 6 mm.
  • Maximum 20 mm (single application).

- Joint depth:

  • Minimum 10 mm on porous substrates (6 mm on non porous substrates).
  • Maximum 10 mm.

- Width: Depth Ratio:

Contact Adshead Ratcliffe Technical Service Department.

Technical data:

  • Typical Shore D Hardness (cured at 20º C): 60–70.
  • Work life (typical at 20ºC): 45 minutes.
  • Application temperature: 10–40ºC.
  • Service temperature: -20 to +90ºC.
  • Cure rate (at 20ºC): 48 hours. At lower temperatures cure rate will be extended.
  • Chemical resistance: Resistant to most alkalis and dilute acids, petrol, diesel, jet fuel.
  • Service life: 20 years+.
  • Movement accommodation: Tension 5%, compression 50%.

Similar products from Carlisle Construction Materials Limited

Arbo 2020

Arbo 2020

Arbokol 1025 SP

Arbokol 1025 SP

Arbomeric MP10

Arbomeric MP10

Arbomeric MP20

Arbomeric MP20

Arbomeric MP60

Arbomeric MP60