NBS Source
I'm a manufacturer
Compare variants

Altro Proof™

Verified by manufacturer 30 days ago

Altro Proof fast-track

Altro Variant:

Collection of easy-to-apply damp-proof membranes.

Jump to:
+44 (0)1462 480480 Website

Application

Suitable for use on substrates of high moisture content with a relative humidity of 75–97%.

Description

An easy to apply epoxy surface damp-proofing membrane that allows for the early installation of floor coverings, providing protection from residual construction moisture and water vapour. The effective, single-coat application saves time and offers high performance without the need for additional coats or increased application thickness.

The product has high adhesion to concrete under adverse conditions and is an effective solution to progressing fast track construction (over green concrete) and refurbishment projects (on existing substrates).


Variations include:

  • Altro Proof standard.
  • Altro Proof fast-track: Fast curing system that offers time savings and enables levelling/ smoothing compounds to be laid in the same day.


Altro safety flooring, resin systems, smooth vinyl and rubber floorings are suitable for installing directly over Altro Proof. Typically these are used in conjunction with a water resistant levelling screed which may be applied on the same day. Suitable water resistant smoothing compounds may be applied beneath Altro Proof. Consult manufacturer for details.

General information

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_68_47 Liquid tanking resinsPrimary

CAWS

J30/10 Cold-applied damp-proofing

J30/130 Cold-applied damp-proofing

Specification data - Liquid tanking resins

Execution

Preparation:
New ground supported concrete should incorporate an integral physical functioning DPM within the construction in accordance with building regulations.
Substrates should be dry, structurally sound and free from contamination, friable materials, laitance and contaminants which may affect either the adhesion or penetration of the Altro Proof system. All residues of old paint coatings and dust must be fully removed mechanically in order to achieve maximum adhesion.
Substrates should achieve 26 N/mm² compressive strength (BS EN 12504-2:) and surface tensile strength 1.5 N/mm² (BS EN 13892-8:).

Bond strength

To BS EN 4264, 3.5.

Product Reference

Altro Proof fast-track