Alto FENIX Toilet Cubicles

Depth:

1500 mm.

Fittings and door furniture:

D-Line stainless steel indicator bolts, Royde & Tucker fall closed hinges, stainless steel coat hook and hydraulic door dampener.

Pilasters and doors:

Manufactured from 44 mm chipboard, edged in matching/ complementing Corian® then faced in Fenix NTM from Arpa Industriale. Edges are then rebated to create the flush design.

Partitions:

- Size:

• Height: 2400 mm as standard; this can vary, depending on design. Consult manufacturer and insert requirements.

• Floor clearance: 20 mm (door undercut) as standard; this can vary, depending on design. Consult manufacturer and insert requirements.

- Type:

• Option 1 – floor-to-ceiling treated PAR softwood timber frame, laminated where required to create flashgaps, with two panels fitted either side to give an 84 mm-thick dividing partition.

• Option 2 – 25 mm MR MDF central dividing panel fitted floor-to-ceiling, with two panels fitted either side to give a 60 mm-thick dividing partition.

• Option 3 – two 44 mm chipboard panels lipped in hardwood then faced both sides with high pressure laminate (HPL), fitted to floor and ceiling with hardwood splines.

Accessories/ Other requirements:

Alto cubicles are available in configurations to comply with Approved Document M (E&W), complete with outward opening doors. A standard stainless steel pull handle is supplied to the outside face of all outward opening cubicle doors. Complementary grab rails are also available.