NBS Source
List your products
Application

For use as a wearing layer in Alsan PMMA waterproofing systems. The surfaces of the system can be designed in any colour or pattern. The appropriate slip resistant properties are achieved by using different finishing's.

Description

A PMMA (polymethyl methacrylate) based, high-grade, mechanically durable resin wearing layer that can be supplied in any colour used for creating patterns or lettering. Different finishings (chips, sand, etc) can be applied to achieve the desired slip-resistant properties. Can be used with Alsan 070 catalyst.

Features and benefits:

  • Available in most RAL colours.
  • Can be used to create desired colour patterns (e.g. tiled look, lettering).
  • Abrasion-resistant.
  • Permanently weather-resistant (UV, hydrolysis and alkali resistant).
  • Easy and fast application - sheepskin roller for general use, or hard rubber blade for use with sand finished surfaces.
  • Fast-curing.
  • Solvent-free.

Applications:

For use as a wearing layer in Alsan PMMA waterproofing systems. The surfaces of the system can be designed in any colour or pattern. The appropriate slip resistant properties are achieved by using different finishing's.

General information
Material

Two-component, PMMA (polymethyl methacrylate) based resin

Uniclass 2015 Acrylic-based waterproof coatings (Pr_35_31_68_01)
Specification data
Product Reference

Alsan 970 F

Colour

Pebble grey - RAL 7032

Stone grey - RAL 7030

Special order

Insert RAL colour requirement.

Standard product features

Material:

Two-component, PMMA (polymethyl methacrylate) based resin.

Consumption:

0.5–0.7 kg/m² (dependent on substrate).

Technical properties:

  • Density: 1.04–1.2 g/cm³ (dependent on colour).
  • Application temperature (air): -5 to +35°C.
  • Pot life: 15 minutes (approximate).
  • Rain proof: After 45 minutes (approximate).
  • Can be walked on/ over coated: After one hour (approximate).
  • Curing time: Three hours (approximate).

Literature
Similar products from Soprema UK