5800 Electric Curtain Track System
Description

5800 Electric Curtain Track System is a wall or ceiling mounted, single channel track for very heavy weight curtains, up to 280 kg in weight, designed for theatre stage use. The motor used is enormously strong and it is recommended that a timber soffit at least 40 mm thick is used to support the track.

Components:

  • Track Ref 5810.
  • Motor type B, Ref 5805.
  • Control system.
  • Drive set.

Features:

  • Can be bent to 500 mm radius (minimum); with manual override, the profile cannot be bent.
  • Stacking: Single, pair and multiple stacks and asymmetric applications.
  • Supplied complete with motor connected.
  • Curtain travel speed: 160 mm/second.
  • Compatible with Wave, a contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant.

Switch control:

All electric controlled systems can be controlled by a white plastic wall mounted switch. When using fixed switches only, where more than the switch is needed to operate systems individually, the low voltage control facility on the motor itself should be used to provide easier, safer and more economic installations.

Fitting:

Where the system is to be fitted to the ceiling (recommended in most cases), the surface must be absolutely flat. Any unevenness will cause problems in fitting the clamps and will almost certainly affect the functioning of the system.

General information

Features

Can be bent to 500 mm radius (minimum); with manual override, the profile cannot be bent

Stacking: Single, pair and multiple stacks and asymmetric applications

Supplied complete with motor connected

Curtain travel speed: 160 mm/second

Compatible with Wave, a contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant

Uniclass 2015

Pr_40_30_20_96 Window curtain supportsPrimary

CAWS

N10/230 Curtain supports

Specification data - Window curtain supports Enhanced data

Product Reference

5800 Electric Curtain Track System

Dimensions

As drawing ___

As schedule ___

Fixing brackets

Ceiling fix with clamps Ref 3033

Wall fix with bracket Ref 3239D

Motor

-

Motor type

Ref 9020

Ref 9021

Ref 9022

Ref 9023

Operating system

As standard

Infra-red control

Wall switch control

Drive/ Guide set

Ref 9222

Ref 9223

Ref 5146

Ref 5170

Accessories

Not required

Standard product features

Capacity:

Maximum curtain weight: 44 kg (20 kg with manual override).

Track:

  • Profile: 50 mm wide x 21 mm deep.
  • Maximum overall track length: 10 metres (6 metres with manual override).

Material/ Finish:

White powder coated aluminium.

Fixing:

  • Track fixings are required at 300–600 mm centres, depending on the curtain configuration.
  • Fix nylon ceiling clamps Ref 3826 to extension brackets with M4 x 8 mm screws.

Product Options

Motor/ features:

Ref 9020:

  • Other remote controls (infra-red and radio) with external devices possible.
  • Timer and light sensor connections possible.
  • Suitable for all common home automation and bus systems.
  • Switching by the mains group – no relays required.
  • Switching by low voltage inputs group (maximum 15 motors) and individual.
  • Mains 230V simultaneous or individual operation.
  • Timer option Ref 0900.

Ref 9021: with integral radio receiver:

  • Interference free.
  • Electronic limit settings with memory to protect against power failure.
  • Thermal overload protection.
  • Meets the standards ETLl/ UL, CE/ IECEE-CB, CCC.
  • Shaft rotation reversible.
  • Smooth operation with soft start and soft stop.
  • Automatic obstacle detection.
  • Two programmable scenes (intermediate stops).
  • Standard status LED indicator.
  • Can be stopped at any position.
  • Silent Gliss radio control Ref 0450.
  • Suitable for all common home automation and bus systems.
  • Switching by low voltage inputs group (maximum 15 motors) and individual.

Ref 9022: with manual override:

  • With manual override.
  • Other remote controls (infra-red and radio) with external devices possible.
  • Timer and light sensor connections possible.
  • Suitable for all common home automation and bus systems.
  • Switching by low voltage inputs group (maximum 15 motors) and individual.
  • Timer option Ref 0900.

Ref 9023: with radio receiver and manual override:

  • Interference free.
  • Electronic limit settings with memory to protect against power failure.
  • Thermal overload protection.
  • Meets the standards ETLl/ UL, CE/ IECEE-CB, CCC.
  • Shaft rotation reversible.
  • Smooth operation with soft start and soft stop.
  • Automatic obstacle detection.
  • Two programmable scenes (intermediate stops).
  • Standard status LED indicator.
  • Built-in radio receiver and manual override.
  • Silent Gliss radio control Ref 0450.
  • Suitable for all common home automation and bus systems.
  • Switching by low voltage inputs group (maximum 15 motors) and individual.

Positioning:

  • Motor can be hidden by curtain or can be positioned above track profile in suspended ceilings; consult manufacturer for details.

Manual override (9022 and 9023 only):

  • Secures from damages when drawn by hand.
  • Can be stopped at any position.

Sets:

  • Standard guide set Ref 9122, containing: Support Ref 5147; Mask Ref 5110; Mask for pair stack Ref 5112; Master carrier Ref 5005; Master carrier Ref 5120; Clip Ref 5127; Belt return Ref 5143; Adapter Ref 5144; Securing pin Ref 5149; Driving wheel Ref 5152 and Case gear drive Ref 5186.
  • Driving set for manual overdrive Ref 9123, containing: Set Ref 5170 (see below); Support Ref 5147; Mask Ref 5110 (two); Mask for pair stack Ref 5112; Belt return Ref 5143; Adapter Ref 5144; Securing pin Ref 5149; Mechanical endstop Ref 5183 (two); Driving wheel Ref 5402 and Case gear drive Ref 5186.
  • Master carrier set for manual override Ref 5170, containing: Overlap arm Ref 5172; Bearing Ref 5174 (two); Holder left Ref 5167, and Holder right Ref 5169.
  • Asymmetrical set Ref 5148, containing: Runner Ref 5146; Master carrier Ref 5328; Pilot runner Ref 5329 and Wire holder Ref 5330.

Accessories:

  • Non-latching switch available in one, two, three, four, five and six gang options; consult manufacturer for details.
  • Wall mounted switch Ref 0913 and 0914: Finish: BR Brass/ BS Brushed Stainless Steel/ MP Mirror Polish.

Standard accessories:

  • Clamp (35 mm) Ref 3033.
  • Connector (38 mm) Ref 2613.
  • Drive belt Ref 5130.
  • Lead with in-line connector Ref 0562.
  • Latching switch including pattress box Ref 0615.
  • Roller glider with eye Ref 6098.
  • Spring stop Ref 6086.

Other accessories:

  • Bracket Ref 3239D.
  • Cable comb for manual override option Ref 5441.
  • Electronic endstop for manual override option Ref 5171.
  • Endstop Ref 6007.
  • Hand held transmitter Ref 0916.
  • Hand held transmitter single channel Ref 0915.
  • Low voltage connecting cable Ref 5779.
  • Magnet holder Ref 5165.
  • Non-latching switch Ref 0565.
  • Overlap arm (single stack) Ref 5003.
  • Profile connector Ref 2962.
  • Programming cable Ref 5651.
  • Roller glider Ref 6283.
  • Roller glider with hook Ref 6094.
  • Special plug for manual override option Ref 5778.
  • Steel wire Ref 5331.
  • Top hemming tape Ref 6263.
  • Wall mounted switch single channel Ref 0913. Finish: ???.
  • Wall mounted switch eight-channel Ref 0914. Finish: ???.
  • Wave glider cord (60 mm) Ref 6345.
  • Wave glider cord (80 mm) Ref 6346.
  • Wave curtain heading tape Ref 6349.
  • White pattress box Ref 0917.

Similar products from Silent Gliss Ltd