Teesside University’s Greig Building, named in honour of the founding father of computer science Bill Greig, is the home of the university’s Computer and Mathematical Sciences Studies department. When the aged bituminous roof coverings had shown failures including splits, blow holes and crazing, it was of paramount importance that a waterproofing solution could be provided as quickly as possible to prevent the risk of water damage and disruption.

The university’s site maintenance team turned to Polyroof for a solution, which started with a detailed survey of the three roof areas totalling 750m².

The Challenge

Core tests taken at appropriate locations throughout the roof areas demonstrated that the existing warm roof build-ups were free from signs of decay. This meant that the roofs could be retained and over-coated with a new waterproofing system allowing for a rapid, minimal-disruption solution.

A bespoke specification was put together based on the findings from the Polyroof Survey Report that provided a comprehensive set of recommendations, including remedial instruction for many problematic roof details. With the peace of mind and satisfaction that the various problems on the roof would be solved through Polyroof’s proposals, the client progressed with a tender process that resulted in a successful application by Polyroof Approved Contractor BBR Roofing Ltd.

The Solution

Polyroof’s Protec System, a hybrid polymer liquid system with extremely fast curing and installation times was chosen as the ideal solution for the project. Due to its fully cold-applied application, the works could be carried out during the university’s term times, without having to wait for closure periods between semesters.

Works began with the existing asphalt and felt coverings being made good where required, including the levelling and filling of blow holes and cracks with Polyroof Structural Repair Mortar. Next, the surfaces were thoroughly cleaned and degreased to provide a sound substrate for the new waterproofing system.

Many of the roof perimeters and junctions featured parapet walls which were identified as a potential point of water ingress during the survey. The inner faces and tops were therefore boarded-over with 18mm Polyroof approved plywood which would allow these details to be fully encapsulated with the Protec System, meaning their waterproof integrity would be covered under the new system’s guarantee. Protec can waterproof vertical areas with the greatest of ease due to its thixotropic formulation, which means slumping and running is minimised during application.

Polyroof’s extra-tough GRP trims were then installed to create neat and robust edge detailing for exposed perimeters before the main Protec system application commenced. After priming surfaces where required, the first coat of Protec was applied and reinforced with PolyMat 450. With its RapidCure technology, the Protec can be walked on and over-coated after only 30-60 minute after applications, meaning large roof areas can be made fully waterproofed within a matter of hours.

After the second coat of Protec was applied to complete the waterproofing system, designated maintenance walkways were formed through embedding quartz sand aggregate into a third coat of Protec liquid.

Completion and Inspection

The refurbishment of the roof was completed within the client’s target timeframe and budget. Following a final inspection by Polyroof Technical Services, which highlighted quality workmanship of BBR Roofing, the client received Polyroof’s trusted Accredited System Guarantee and now has the peace of mind the roof will be leak-free for decades to come.

Polyroof Products Ltd

Addresses and contacts

Polyroof Ltd

Ruth Evans

Christian Baker-Smith

Additional links