Pliteq
CREATING BUILDING PRODUCTS USING RECYCLED CAR TYRES DIVERTED FROM LANDFILL.
A-Z
Showing 1-27 of 27
GENIEBOARD® 301
Pliteq
GENIEBOARD® 302
Pliteq
GENIEBOARD® F
Pliteq
GENIEBOARD® K2
Pliteq
GenieClip Brochure
Pliteq
GenieClip RST was designed as an alternative to resilient channel (RC) for isolating drywall from both ceiling and wall structures. It features a one piece moulded rubber and galvanized steel body with a single hole for fastening.
This sound control clip has been designed to:
- work straight out of the box – no on-site adjustment required
- require only one screw to attach to either wood or metal wall studs or floor joists
- eliminate the risk of short circuiting which reduces sound insulation performance
- reduce assembly weight and contributes to LEED certified buildings
GenieClip Installation Guide
Pliteq
GenieClip Mount Installation Guide
Pliteq
GenieMat CE DoP
Pliteq
GenieMat FF Brochure
Pliteq
GenieMat FF is he next generation of acoustic floating floor that is made from 92% recycled rubber content.
- Continuous underlayment system that limits surface area contact down to 4% at 1400 kg/m2
- Achieves low natural frequency with systems available as low as 6 Hz
- Can be safely loaded over a wide range up to 100 kg/cm2
- Helps to achieve HEA05 BREEAM credits
- Mould, bacteria, fungi, and water resistant
- Penetrations for pipes, ductwork, electrical conduits, and drains are easily accommodated
- Rolls out quickly and is easy to install without the need for adhesive
- Can be used directly under screed, lightweight, or normal weight concrete with no plywood formwork required
GenieMat FF Installation Guide
Pliteq
GenieMat FF70/FF70LDM Installation Guide
Pliteq
GenieMat FFNP Brochure
Pliteq
GenieMat FFNP is a flat, resilient, under screed acoustic underlay made from 94% recycled rubber content. It is predominantly used to meet the impact sound insulation performance standards for floors set out in Approved Document E (Part E) of the British Building Regulations 2010.
When this acoustic underlay is installed in conjunction with GenieMat PMI perimeter isolation it provides a low-risk, high-performance solution to meeting Part E of the Building Regulations.
- A flat, resilient acoustic underlay
- Approved Document E compliant
- Affordable, low risk solution
- Used under screed
- Only 3 components to install on site
- No specialist tools required during installation
GenieMat FFNP Installation Guide
Pliteq
GenieMat FIT Brochure
Pliteq
GenieMat FIT is an all-in-one fitness floor made from 92% recycled rubber content, engineered to reduce structure-borne sound and vibration transmission in concrete, wood frame, and metal deck construction.
GenieMat FIT floors dramatically reduce low frequency impact noise in free weight areas, under cardio equipment, and in fitness studios.
GenieMat FIT70 Installation Guide
Pliteq
GenieMat RST Brochure
Pliteq
GenieMat RST is an acoustic underlayment for floors. It is made from 94% recycled rubber content and can be used directly under tile, vinyl plank/ tiles and wood flooring. In fact it can be used under any hard surface floor finish in concrete and wood frame construction.
It is used when superior sound control is required in multi-family housing, high-rises, or commercial buildings and protects ceramic tile, porcelain, and stone from substrate cracks.
GenieMat RST acoustic underlayment engineered for direct adhered floor coverings such as tile, stone, wood, and vinyl floor coverings.
GenieMat RST Installation Guide
Pliteq
Hoteliers Acoustic Design Guide
Pliteq
Stop noise at its source and improve customer
experience through effective hotel acoustic design.
This succinct guide arms hoteliers and developers with the key questions to ask during the design process and the products most suited to each source of noise.
Indicative Details - GenieClip RST
Pliteq
Indicative Details - GenieMat FFNP
Pliteq
Indicative Details - GenieMat RST
Pliteq
Indicative Drawings - GenieClip LB
Pliteq
Indicative Drawings - GenieMat FF
Pliteq
Indicative Drawings - GenieMat FIT
Pliteq
Mixed-Use Buildings Acoustic Design Guide
Pliteq
Stop noise at its source and improve customer
experience through effective mixed-used building
acoustic design.
This succinct guide arms architects and developers with the key questions to ask during the design process and the products most suited to each source of noise.
Pliteq LEED Accreditation Guide
Pliteq
At Pliteq, we’re committed to serving the health and safety
of both our environment and our community.
Pliteq is an engineering company dedicated to providing creative solutions to structural, vibration, and sound control problems using recycled materials.
Using elastomer technology and intellectual property, high performance solutions are researched, developed and rigorously tested for the engineer. We are committed to using resources wisely and consider the impact on the
environment and health and safety in all of our design and engineering choices.
Resilient Channels: Guaranteed to Fail
Pliteq
Analysis of the Failure Modes of “Resilient” Channel and why the GenieClip RST is a better working alternative.
Showing 1-27 of 27