Paroc Panel System

AST E Wall Panels Paroc provided the exterior and interior sandwich wall panels for the Covanta Dublin Waste-to-Energy (DWTE) building in Poolbeg Dublin, Ireland. The building was designed by the architecture firm Friis & Möltke, and its unique shape was inspired by conch shells.The huge DWTE facility encloses the entire waste-to-energy process within a single structure creating a fascinating silhouette in the open landscape. The building is huge in size: 194 metres long, 128 metres wide and 52 metres tall. The designers still did not want it to be too distinctive and reflecting surroundings a moderate matt silver colour tone was selected for the whole façade. Due to the unique shape of the building, Paroc designed and produced specially shaped, very complicated panels for the project.Conch shell shape was realized in close cooperation. For example, the rounded corner feature of the building presented particular challenges and we were asked to prepare our recommendations on how this could be achieved as well as a sample mock-up for inspection by the clients and their consultants. Finally, the trapezium was the shape adopted to achieve the large rounded corners. The trapezium panels diminish in size from bottom to top and segment around the corner to achieve the desired effect.Other challenges included the west elevation of the building where the wall is at a 13° pitch from vertical and also at a 97.5° angle from horizontal. This meant that the square ends of the panel would not meet the I-beam supports. The solution here was to cut the ends of the panels with a small diagonal cut, resulting in each panel on the west elevation cut in the shape of a parallelogram."High quality, strength and fire safety of Paroc Panels are the well-known benefits on the market already", Export Manager Tom Österlund states. The panel is also used internally to construct the internal firewalls and smokescreen partitions. Because of the complexity of the plant within the building, it was necessary that the plant would be installed before the external cladding. This also applied to the up to 50 m high the internal firewalls and smokescreen partitions designed to meet external loads until such time as the external walls are installed, and the internal walls only then exposed to internal loads.The value of the panel order and the accessories was approximately EUR 2 million, and the plant will be operational in 2017. It will provide electricity for 80,000 homes and district heating for upwards of 50,000 homes out of 600 000 tons of waste.

AST L and AST E Wall Panel SystemRAL0029, RAL7024 and RAL90063,300m² of Paroc Stone Wool PanelsJumpyard is a prominent trampoline activity park that opened in 2024 in Kungsbacka, Sweden. The facility's construction features a 20-meter-high building with a distinctive façade in various colors and shades, making it a new landmark visible from the nearby motorway.The building's walls and façade are constructed using 3,300 square meters of Paroc Panel System AST sandwich panels in colors RAL 0029, RAL 7024, and RAL 9006, creating a bold, cohesive brand identity that mirrors the park’s energetic atmosphere. Inside, visitors can enjoy a wide variety of trampoline-based attractions suitable for all ages.Paroc AST L and AST E panels were used in the construction, providing high thermal insulation and static performance. These panels contribute to the energy efficiency of the building, maintaining a comfortable indoor climate while supporting the structural integrity of high walls and large open spaces. Their durability and performance make them ideal for such a dynamic and high-traffic facility.

AST L and AST L Acoustic Wall Panel SystemRAL7024 and RAL00207,400m² of Paroc Stone Wool PanelsKupittaa Ball Hall is a prominent sports facility located in the heart of Turku, owned by the City of Turku. Designed to support a range of indoor ball sports, the hall contributes significantly to the region's athletic infrastructure. The architectural vision, brought to life by APRT (Arkkitehtityöhuone Artto Palo Rossi Tikka Oy), emphasizes both functionality and aesthetic appeal.To meet the demands of durability, acoustic performance, and design, Paroc Panel System delivered a comprehensive panel solution tailored to the project's unique needs:4,800 m2 of exterior wall panels ensured energy efficiency and long-term weather protection.800 m2 of interior wall panels provided structural separation and safety.1,800 m2 of acoustic wall panels enhanced the hall’s sound insulation, crucial for a multi-sport environment.The combination of Graphite Grey R7024 and Howlite White 0020 colours complemented the architectural design, resulting in a modern, clean appearance aligned with the public purpose of the facility.

AST L Delign Architectural SystemRAL 7040, RAL 7015 and RAL 90058,000m² of Paroc Stone Wool PanelsThe "Lumijälki 2" is a commercial complex in Vantaa, Finland. Covering around 10,000 square meters, it combines warehouse, production, and office spaces under one roof, complete with ample parking and dedicated lanes for heavy vehicles. Designed to host three different tenants, Lumijälki 2 offers a convenient, well-connected location for businesses.Built with efficiency in mind, this project utilizes 8,000 square meters of AST L Delign panels in 240mm thickness and colors RR21, RR23, and RR33. The Delign system is an innovative sandwich panel solution that conceals vertical seams, enabling continuous horizontal joints and hidden fixings. This design not only creates a smooth, seamless facade but also allows joints to extend around corners, providing fresh visual possibilities for modern architecture.AST L Delign panels provide not only an attractive appearance but also high thermal insulation and fire resistance, ensuring that the facility maintains optimal energy efficiency and fire protection for heavy-duty operations. The strategic location of Lumijälki 2 and its advanced construction make it an ideal hub for logistics and distribution activities.

AST L Wall Panel System8,000m² of Paroc Stone Wool PanelsThe construction of the Munchmuseet, which was to house the collection of renowned artist Edvard Munch, began in 2015 by the Oslo municipality. The museum was given a prime location in the heart of Oslo and has received international attention following its opening in 2021.To safeguard the precious art collection from the elements, such as weather, wind, and temperature fluctuations, the decision was made to use Paroc Panel System's AST-L elements. Stefan Abrahamsson, who was project manager with responsibility for SGS, the external envelope contractor, explains the reasoning behind selecting the Paroc Panel System.“We chose Paroc Panel System as insulation and cladding of the concrete structures instead of a built wooden structure since the structure was exposed to the weather elements until we reached the top at 60 meters. We then developed a mounting system for external cladding that could transfer the load in a weather-tight manner to the concrete structure."To insulate Munchmuseet in the non see-through areas, approximately 8,000 m2 of AST-L elements were used. The distinctive design and unique location made the construction process extra challenging. This meant that extra high demands were placed on the elements. Abrahamsson points to three main challenges that had to be solved."For the project, it was of course that it was built out in the water and that we were to clad a slip-cast concrete frame that had large tolerances with a precise construction with a highly insulating material and integrate this with windows and external cladding of undulating plates. This was solved by first building a pier around the bottom of the project on which you could walk and land suspended scaffolding.Another problem was the sloping surfaces where we had to test the Paroc Panel System solution for roof application at a 70 degree angle up to 1200 PA.A third challenge was that the timetables didn't quite match, so we had to build a jetty around the tower at a height of 40 meters above the water, with the possibility to hang scaffolding and lift material. To mount under the overhanging part, we built a road on the roof that could take a 22-ton Manitou as a lifting crane and climbers were used to mount the parts that sloped outwards.”When asked whether the elements meet the expectations, Abrahmsson replies as follows:“Yes it does. We had a safe assembly and were able to lift large elements into place and then successively seal off parts of the facade."It wasn't just the panel he was happy with, but also the collaboration with Paroc Panel System's team. Abrahamsson particularly highlights how solution-oriented the team was."The collaboration was good and everyone involved was very solution oriented to adapt standard solutions to the different conditions."The outcome at Munchmuseet was highly satisfactory. Abrahamsson, now employed by Lindner-Group, expresses positive sentiment towards using Paroc Panel System's elements for future endeavors.

AST L Wall Panel System and AST L Delign Architectural System23,000m² of Paroc Stone Wool PanelsOkmetic, producer of silicon wafers, has invested nearly €400 million in a state-of-the-art semiconductor fabrication facility in Vantaa, Finland. The project, designed to more than double Okmetic’s production capacity, required innovative construction solutions to meet the strict environmental and structural demands of the semiconductor industry. To achieve these high-performance requirements, 23,000m² of Paroc Panel System's AST L Delign and AST L Wall Panels were used for the facade and internal partition walls, respectively. The semiconductor industry requires precision in climate control, fire resistance, and structural integrity.The Paroc AST® L Delign System was selected due to its architectural appeal, fire performance and thermal efficiency. AST® L Delign facade panels provide a sleek, modern appearance with concealed fixings, ensuring a seamless horizontal facade that aligns with the high-tech nature of Okmetic’s operations. They provide also quick and efficient installation, reducing project lead time while maintaining a high-quality finish.Both AST® L Delign and AST® L Wall Panels feature a stone wool core, achieving a fire rating of A2-s1, d0, crucial for industrial environments handling sensitive electronics. Low U-value (0.15 W/m²·K for 240mm Delign panels used) supports temperature stability, vital for semiconductor fabrication processes that require controlled environments. The thermal insulation properties contribute also to reduced energy costs and sustainability.

AST S+ Wall Panel System, AST E Delign Architectural System and AST E Ceiling Panel System3,500m² of Paroc Stone Wool PanelsVantaan Rasti is a two-story production, logistics, and warehouse facility in Vantaa, Finland, completed in 2023 and designed by AFRY Ark Studio. Located on Postimiehenkuja, the building primarily accommodates logistics, storage, and vehicle maintenance needs. On the first floor, each operator’s premises connect directly to their daily operations, while the second floor contains office spaces overlooking the main hall. The basement offers shared amenities such as changing rooms, a civil defense shelter, and a parking garage.Construction involved the use of 3,500 square meters of Delign 240 mm panels for the external walls, 250 square meters of AST E 150 mm ceiling elements for internal ceilings, and 1,200 square meters of AST S+ 100 mm panels for partition walls. The Delign system conceals vertical seams and forms continuous horizontal joints, lending the building a smooth, modern appearance.The building has been awarded BREEAM sustainable building certification with a rating - Very Good (represents advanced good practice and is awarded to projects that achieve 55% or more of the available assessment score). Our DELIGN products, which are also available with a lower embodied carbon range, help to achieve a better rating in sustainable building standards and certifications.