A-Z
Showing 109-133 of 133
Delta-MS Protection System
Delta Membrane Systems Ltd
High compressive strength is a feature of the Delta-MS dimpled sheet from Delta Membrane Systems, with further benefits including low point loads and fast, tailored application straight from the roll on perimeter insulation, sealing slurries and waterproof concrete.
This sheet offers outstanding safety in building, underground and civil engineering construction. It may be used as a sub-base course under concrete floor slabs, for foundation wall protection, and as a seepage layer in cavity walls.
There are more than 1800 dimples per m for efficient pressure distribution and low point loads, even on perimeter insulation.
Delta-MS is capable of safely separating foundation walls from moist soil for all-round protection of compression-resistant waterproofing coats or perimeter insulation.
Delta-MS Sub-base Course Installation Instructions
Delta Membrane Systems Ltd
Offered as an efficient and cost-effective alternative to traditional sub-base courses Delta-MS , a dimpled sheet, is made from high-density polyethylene (HDPE), and is supplied in roll form for quick and easy laying. Resistant to acids, alkaline, oils and solvents, the material has a high compressive strength in the region of 250kN/m2. The design of the sheet ensures good pressure distribution and low point loads. It also protects the foundation slab from rising damp, and cement grout from seeping into the ground. Each sheet overlaps the next by at least 200mm for an effective seal, and specially-designed spacers ensure steel reinforcement sits above the membrane at a consistent level.
Delta-MS Sub-base Course Protection System
Delta Membrane Systems Ltd
Offered as an efficient and cost-effective alternative to traditional sub-base courses Delta-MS , a dimpled sheet, is made from high-density polyethylene (HDPE), and is supplied in roll form for quick and easy laying. Resistant to acids, alkaline, oils and solvents, the material has a high compressive strength in the region of 250kN/m2. The design of the sheet ensures good pressure distribution and low point loads. It also protects the foundation slab from rising damp, and cement grout from seeping into the ground. Each sheet overlaps the next by at least 200mm for an effective seal, and specially-designed spacers ensure steel reinforcement sits above the membrane at a consistent level.
Delta-NP Drain Installation Instructions
Delta Membrane Systems Ltd
Both vertical and horizontal applications of Delta-NP Drain are covered in a two-page Installation Instructions leaflet from Delta Membrane Systems.
This leaflet gives the proper installation criteria to follow for effective installation of Delta-NP Drain just one of a wide range of products from the company.
Delta-NP Drain Protection and Drainage System
Delta Membrane Systems Ltd
High drainage capacity through specially-configured dimples is offered by Delta Membrane Systems with its Delta-NP Drain – a compact two-ply composite sheet that keeps its shape perfectly, even under high pressure.
Suitable for vertical and horizontal applications, this product promotes constant water drainage, and offers rot resistance and cost-effective installation.
The dimple part of the sheet gives a high compressive strength of about 150kN/m2, and gives dependable vertical and horizontal drainage in civil engineering applications, retaining walls of all kinds, open tunnels and underground parking lots.
Bonded to the dimpled sheet is a geotextile layer which filters out fine soil particles – ensuring a constant flow of water to the drainage.
DELTA-TERRAXX
Delta Membrane Systems Ltd
For all compression resistant waterproof coatings.
DELTA-TERRAXX Protection and Drainage System for Cellars
Delta Membrane Systems Ltd
Capable of keeping cellars permanently warm and dry, Delta-TERRAXX is an all-round protection and high performance drainage system from Delta Membrane Systems.
This product guarantees universal protection from hydrostatic water pressure, seepage, and artesian water as per DIN 18195 when applied as a second waterproof layer on top of existing cellar waterproof sealing.
It protects perimeter insulation boards from moisture, safeguards insulation performance, and effectively separates the perimeter insulation from the soil.
Delta-TERRAXX has less emissivity and, consequently, enhanced heat transmission resistance due to its silver surface. It can be installed swiftly straight from the roll without additional excavation work thanks to its two-ply structure.
DELTA-TERRAXX Technical Guide - Protection and Drainage System for Horizontal Application
Delta Membrane Systems Ltd
Giving an all-round solution for outstanding protection and drainage in horizontal applications, Delta-TERRAXX features in a 16 page technical guide from Delta Membrane Systems.
This guide gives information on the stringent requirements in horizontal applications, along with an overview of technical detail solutions, details on the fast and easy installation, technical data and tender specifications.
Delta-TERRAXX helps utilise large flat roofs and ceilings covering underground parking lots and buildings that might otherwise remain unused.
This extremely robust protection and drainage system has been optimised for different applications in horizontal drainage.
Consisting of a dimpled sheet with a fused-on geotextile, the composite material forms a highly effective drainage layer.
DELTA-TERRAXX The Problem-Solver
Delta Membrane Systems Ltd
Various applications from sites around Europe feature in ‘Delta-TERRAXX – The Problem Solver’, a 16 page brochure from Delta Membrane Systems.
Most of the projects featured are in Germany, but there is also a look at the refurbishment of an underground car park in Switzerland, and the construction of a housing estate and underground car park in Italy.
Featuring a dimpled sheet with a fused-on geotextile to form a highly effective drainage layer, Delta-TERRAXX is capable of withstanding extreme compression loads – up to 400kN/m2 – and can be installed at depths of up to 10m.
Facing up, the geotextile acts as a filter protecting the air gap created by the dimpled sheet underneath.
Delta-Trela Installation Information
Delta Membrane Systems Ltd
Giving protection against corrosion and moisture, Delta-TRELA is an underlay for metal-clad roofs from Delta Membrane Systems.
To ensure correct and effective installation, the company offers a two-page installation guide.
It shows how this product is installed in horizontal runs, parallel to the eaves, with the dimple texturing facing upwards.
This allows the Delta-TRELA to prevent moisture accumulation under metal roofs, and eliminate the risk of corrosion.
Flat Green Roof Systems for Gardens, Terraces, Walkways & Parking
Delta Membrane Systems Ltd
Developed from innovative ideas and
manufactured in leading-edge production
facilities, the top-quality products
made by Dörken GmbH & Co. KG for
foundation protection, waterproofing,
and drainage set standards for reliability,
durability, and energy conservation.
Located in the Westphalian town of
Herdecke, the company traditionally
offers its clients top-quality products and
customised solutions. Having lived
up to this standard for more than
100 years, Dörken is and will always
be a powerful partner for planners,
dealers, and craftsmen.
Getting Started with the Delta Pumps App (Delta HLA Plus)
Delta Membrane Systems Ltd
The Delta Pumps App offers homeowners/facilities managers an uncomplicated way to register their HLA Plus devices. After registration of the Delta HLA Plus all monitoring and notification services are sent directly to the listed keyholders via push notification or email.
The Delta HLA Plus is a smart High-Water Level Alarm and Monitoring System, capable of delivering real-time monitoring and notification services, for ground and surface water pumping stations.
KB Flex Test Report hydrostatic-head
Delta Membrane Systems Ltd
Koster KB-Flex 200 is a permanently plastic, damp and waterproof sealing compound for waterproofing against pressurized water.
Koster KB-Flex 200 is a permanent plastic sealing compound ideal for sealing pipe and cable penetrations, cavities and for custom detail waterproofing solutions against moisture and pressurized water.
Koster - The Green Pages of Construction Chemicals
Delta Membrane Systems Ltd
Koster systems and products stand out due to their exceptionally easy and user-friendly application. This document gives details of the complete product range.
Koster Deuxan 2C Declaration of Performance
Delta Membrane Systems Ltd
Koster Deuxan 2C Declaration of Performance. Every Declaration of Performance can be identified by a unique identification code for the product type (= DoP-code). The document applies when a construction product is covered by a harmonised standard or conforms to a European Technical Assessment. The DoP details the product and the standard and contains information about its performance in relation to the essential characteristics defined within the applicable harmonised technical specification. As from 1July 2013 CE marking must be applied to a product which has either a current DoP or apreviously issued Declaration of Conformity (DoC) under the Construction Products Directive (CPD). The manufacturer through provision of a DoP assumes legal responsibility for the conformity of the product.
Koster Mortar Tight
Delta Membrane Systems Ltd
Koster Mortar Tight is a waterproofing liquid additive which prevents the transmission of water through renders, screeds, and/or sealing slurries.
This versatile product improves the density of the mortar structure, making the mortar water repellent (hydrophobic), furthermore, Koster Mortar Tight promotes self-healing of microcracks through crystallization.
Koster Mortar Tight increases the impermeability of mortars and slurries against moisture, dampness, hydrostatic pressure and driving rain.
Koster Mortar Tight, is free from chlorides and nitrates.
Koster MS Joint Sealant
Delta Membrane Systems Ltd
Koster MS Joint Sealant is a high-performance waterproofing solution. This highly elastic MS polymer-based waterproofing material with excellent elasticity, is characterised by high UV and weather resistance and excellent adhesion to various interior and exterior building materials.
Koster MS Joint Sealant exhibits superior characteristics, being fast-curing and highly elastic. This one-component product is UV-resistant, ensuring durability even under extreme application conditions. Notably, it is VOC-free and environmentally friendly, demonstrating commitment to sustainability. Koster MS Joint Sealant combines the positive properties of silicone and polyurethane sealants without their characteristic weaknesses. It is free of silicone, solvents, and isocyanates.
Koster NB 1 Grey Declaration of Performance
Delta Membrane Systems Ltd
The document applies when a construction product is covered by a harmonised standard or conforms to a European Technical Assessment. The DoP details the product and the standard and contains information about its performance in relation to the essential characteristics defined within the applicable harmonised technical specification. As from 1July 2013 CE marking must be applied to a product which has either a current DoP or apreviously issued Declaration of Conformity (DoC) under the Construction Products Directive (CPD). The manufacturer through provision of a DoP assumes legal responsibility for the conformity of the product.
KÖSTER KB-FLEX 200
Delta Membrane Systems Ltd
Immediate waterproofing of pipe and cable penetrations.
MemTech Ground Gas Protection
Delta Membrane Systems Ltd
Gas protection is a technical solution to prevent or to control gas penetration into properties and structures.
Gas protection systems are critical in projects constructed on land affected by permanent ground gas and/or volatile organic compound (VOC) contamination.
Greater emphasis on appropriate gas protection measures have been brought about by the issue of BS 8485: 2015+A1:2019 Code of Practice for the Design of Protective Measures for Methane and Carbon Dioxide Gases for New Buildings. All ground gas (Methane, Carbon Dioxide, Radon, VOCs, along with others) protection systems should be designed in accordance with the most up to date Guidance and Regulations.
Puddle Flange Product Data Sheet
Delta Membrane Systems Ltd
A Puddle Flange is a waterproof seal for when a pipe passes through a slab to prevent water ingress. A puddle flange is recommended to prevent ground water percolating through the slab between the 110mm pipe work and RC slab and reduces charge on the Delta floor membrane. Delta can provide this in various sizes from 32mm up to 160mm.
Setting up a Delta HLA Plus Alarm and Monitoring System
Delta Membrane Systems Ltd
The Delta HLA Plus is a smart High-Water Level Alarm and Monitoring System, capable of delivering real-time monitoring and notification services, for ground and surface water pumping stations.
Designed to put property owners in control - On any digital device, anywhere, at any time. For all important or time-sensitive notifications, the Delta HLA Plus allows property owners to engage in real-time with their pump stations using the Delta Pumps App.
The Delta Pumps App offers owners an uncomplicated way to register HLA Plus devices. After registration of the Delta HLA Plus all
monitoring and notification services are sent directly to the listed keyholders via push notification or email.
Technical Guide - Protection of Drainage Systems for Horizontal Application
Delta Membrane Systems Ltd
Three products from the Delta Membrane Systems portfolio are featured in a 12 page technical guide for protection and drainage systems for horizontal applications from the company.
The three products highlighted are Delta-TERRAXX, Delta-GEO-DRAIN and Delta-DRAIN.
Included in the brochure is information on the stringent requirements in horizontal applications, a look at horizontal drainage layers, and details of certified safety under permanent loading.
Protection of compression-sensitive waterproofing and insulation boards in inverted roofs is also explained.
All products offer fast and easy installation. A technical data overview on each of the products gives the reader details on information such as contact area, compressive strength (transient loading and permanent load).
Technical Planning - For Foundation-wall Protection, Drainage and Waterproofing
Delta Membrane Systems Ltd
Comprehensive technical planning information using products from Delta Membrane Systems for foundation wall protection, drainage and waterproofing, is given in this brochure.
Included in the brochure are details on the efficient protection from damp and water for buildings, cellars, underground parking lots and tunnels. Also given are the important codes regulation waterproofing and drainage.
Many Delta products are highlighted bringing protection and drainage solutions for compression-resistant and compression-sensitive vertical and horizontal waterproofing applications.
Alternative sub-base course for floor slabs free from static loading, surface gas drainage systems, DPCs at the building’s basement, and a system for rehabilitating damp walls from the inside are detailed.
Thermal Restoration Plaster
Delta Membrane Systems Ltd
Koster Thermal Restoration Plaster is a pure mineral insulating plaster with good thermal insulation properties that is free from plastics. Ideal for the repair of masonry damaged by moisture and salt, especially after the installation of horizontal barriers.
Koster Thermal Restoration Plaster is suitable for all moisture and salt levels in masonry. Koster Thermal Restoration Plaster can be used to improve the insulation value of masonry and against mold growth.
Allows masonry to dry and desalinate without damage even at high salt levels. Suitable for heavily moisture and salt-contaminated substrates.
Offers a reduction of condensation levels/improves indoor climate.
Showing 109-133 of 133