• For external use.
• St One® Fine is suitable for thick reconstruction of facings, carved or sculpted architectural ornaments, filling and repairing spalls, facade mouldings and imitation stone cladding.
• St One® Original is suitable for thick reconstruction of facings, carved or sculpted architectural ornaments, filling and repairing spalls, facade mouldings, imitation stone cladding, and brick repairs.
• St One® Soft is suitable for thick reconstruction of facings, cut and sculpted in soft fine-grain stone.
• St One® Step is suitable for reconstruction of steps, repairs to sills, coping stones, window sills, copings, repair of paving and stone slabs and balustrade repairs.
• St One® Strong is suitable for thick reconstruction of facings, cut and sculpted in hard, cold stone.

A range of specially formulated ready-mixed mortars based on Saint-Astier natural hydraulic lime and aggregates for the repair or simulation of brick, sandstone, limestone and soft stone.

The range includes:

• St One® Fine – a fine-grain repair mortar for sandstone.
• St One® Original – a repair mortar for limestone and brick.
• St One® Soft – a repair mortar for soft stone (chalk etc.).
• St One® Step – a stone repair mortar for horizontal surfaces (steps, thresholds etc.).
• St One® Strong – a repair mortar for hard stone.

For further mortar and render mix ratios and application guidelines please contact SAINT-ASTIER. Hot weather requirements: Protect lime mortar from uneven and excessive evaporation during dry, hot weather. Provide tarping over the outside of all scaffolding. When the ST One® is uniformly dry, a lime shelter coat or a lime paint can be applied. For greater thicknesses, load successive layers of 3 to 5 cm after setting the previous layer. For thicknesses greater than 4 cm, a reinforcing frame (stainless steel) will be fixed depending on the weight and dimension to be repaired.

Features and benefits:

• Bespoke mix based on masonry composition.
• Easy to model, form and shape.
• It can be used for repairs up to 10 cm (up to 8 cm for St One® Step) and can be remodelled for up to 48 hours (St One® Step can be cut for up to 48 hours).
• Colour: neutral white or pre-coloured mortar from St. One's colour range. In addition, to best match the original stone colour and aesthetic, St. One® colouration can be matched and manufactured. Colours can also be mixed on-site, by incorporating mineral lime-compatible pigments. 
• Supplied in 25 kg bags to which mixing water is added.