Summary
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Application
Designed to secure an inner timber frame to an outer brick skin
Designed to secure an inner timber frame to an outer brick skin
Designed to secure an inner timber frame to an outer brick skin
Description
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Features and benefits:
- This type of timber frame wall tie is right for domestic and small commercial builds. They are suitable for flat sites where the basic wind speed is up to 25 m/s and altitude is not greater than 150 m above sea level.
- Designed for timber frame buildings that accommodates vertical movement.
- Manufactured from grade 304 stainless steel.
- Non-combustible (as defined in the national Building Regulations).
- Excellent corrosion resistance and a service life of not less than 60 years.
- In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
- Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1.
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Features and benefits:
- This type of timber frame wall tie is right for domestic and small commercial builds. They are suitable for flat sites where the basic wind speed is up to 25 m/s and altitude is not greater than 150 m above sea level.
- Designed for timber frame buildings that accommodates vertical movement.
- Manufactured from grade 304 stainless steel.
- Non-combustible (as defined in the national Building Regulations).
- Excellent corrosion resistance and a service life of not less than 60 years.
- In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
- Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1.
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Features and benefits:
- This type of timber frame wall tie is right for domestic and small commercial builds. They are suitable for flat sites where the basic wind speed is up to 25 m/s and altitude is not greater than 150 m above sea level.
- Designed for timber frame buildings that accommodates vertical movement.
- Manufactured from grade 304 stainless steel.
- Non-combustible (as defined in the national Building Regulations).
- Excellent corrosion resistance and a service life of not less than 60 years.
- In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
- Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1.
Color
Silver
Silver
Silver
Material
Stainless steel
Stainless steel
Stainless steel
Length
125 mm, 150 mm, 175 mm
125 mm, 150 mm, 175 mm
125 mm, 150 mm, 175 mm
SKU Code
V61
V61
V61
Specification
Standard
To BS EN 845-1.
To BS EN 845-1.
To BS EN 845-1.
Tie type
Type 6 (strength) to BS EN 845-1.
Type 6 (strength) to BS EN 845-1.
Type 6 (strength) to BS EN 845-1.
Material
Grade 304 stainless steel.
Grade 304 stainless steel.
Grade 304 stainless steel.
Length
175 mm.
125 mm.
150 mm.
End types
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Design embedment length (minimum)
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Movement
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Additional requirements
-
-
-
Mortar joint thickness (minimum)
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Resistance to water crossing cavity
Resistant (drip feature).
Resistant (drip feature).
Resistant (drip feature).
Slope tolerance
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Compressive load capacity
Timber end: 597 N/ 549 N; mortar end: 968 N.
Timber end: 540 N/ 560 N; mortar end: 480 N.
Timber end: 639 N/ 449 N; mortar end: 604 N.
Tensile load capacity
Timber end: 660 N/ 675 N; mortar end: 1786 N.
Timber end: 1160 N/ 1010 N; mortar end: 1060 N.
Timber end: 660 N/ 663 N; mortar end: 1466 N.
Dynamic stiffness
Type B.
Type B.
Type B.
Additional properties
Third party accreditation
UKCA marked.
UKCA marked.
UKCA marked.
Fixing
-
-
-
Cavity
100 mm.
50 mm.
75 mm.
Integral accessories
50 x 3.35 mm stainless steel annular ring nails., 50 x 4.0 mm stainless steel screws for SIPS panels.
50 x 3.35 mm stainless steel annular ring nails., 50 x 4.0 mm stainless steel screws for SIPS panels.
50 x 3.35 mm stainless steel annular ring nails., 50 x 4.0 mm stainless steel screws for SIPS panels.
Sustainability data
Contains Red List materials
No
No
No
Country of product manufacture
United Kingdom
United Kingdom
United Kingdom
Material
Stainless steel
Stainless steel
Stainless steel
Recyclability
Recyclable
Recyclable
Recyclable
Recycled content
0 %
0 %
0 %