Compare

Timber Frame Ties - Type 6 - V61

Name: Timber Frame Ties - Type 6 - V61
Brand: Vista Engineering Ltd
SKU: 4cN3eXoHaVkvc1xj5ciKnW

Verified by manufacturer 2 months ago

150 mm long, for 75 mm cavity

Vista Engineering Ltd

Third party certifications:

ISO 9001 Quality Management
Certificate type

Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.

Jump to:

+44 (0)1663 736700 Website

Application

Designed to secure an inner timber frame to an outer brick skin

Description

Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.

Features and benefits:

This type of timber frame wall tie is right for domestic and small commercial builds. They are suitable for flat sites where the basic wind speed is up to 25 m/s and altitude is not greater than 150 m above sea level.
Designed for timber frame buildings that accommodates vertical movement.
Manufactured from grade 304 stainless steel.
Non-combustible (as defined in the national Building Regulations).
Excellent corrosion resistance and a service life of not less than 60 years.
In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1.

General information

Color	Silver
Material	Stainless steel Guidance for specification option: Grade 304.
Length	125 mm 150 mm 175 mm

Uniclass	Pr_20_85_84_19 Cavity wall tiesPrimary
CAWS	F30/220 Wall ties F30/214 Cavity wall ties F30/215 Cavity wall ties used with partial fill insulation F30/24 Cavity wall ties F30/26 Wall ties F30/25 Cavity wall ties used with partial fill insulation

Specification data - Cavity wall ties

Standard	To BS EN 845-1.
Tie type	Type 6 (strength) to BS EN 845-1. Guidance for specification option: Stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50 to 100 mm. Designed to accommodate vertical movement.
Material	Grade 304 stainless steel.
Length	150 mm.
End types	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Design embedment length (minimum)	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Movement	Manufacturer's standard.
Additional requirements	-
Mortar joint thickness (minimum)	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Resistance to water crossing cavity	Resistant (drip feature).
Slope tolerance	Manufacturer's standard.
Compressive load capacity	Timber end: 639 N/ 449 N; mortar end: 604 N. Guidance for specification option: Timber end: As received/ 24 mm movement.
Tensile load capacity	Timber end: 660 N/ 663 N; mortar end: 1466 N. Guidance for specification option: Timber end: As received/ 24 mm movement.
Dynamic stiffness	Type B.

Third party accreditation	UKCA marked.
Fixing	Guidance for specification option: For masonry end; insert requirements.
Cavity	75 mm.
Integral accessories	50 x 3.35 mm stainless steel annular ring nails. Guidance for specification option: Standard. 50 x 4.0 mm stainless steel screws for SIPS panels.

Sustainability data

Contains Red List materials	No
Country of product manufacture	United Kingdom
Material	Stainless steel Guidance for specification option: Grade 304.
Recyclability	Recyclable
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %