Koster CT 215 Universal Floor is applicable in variable layer thicknesses between 0.2 mm (high-build coating) and 2 mm (self- levelling floor) for the protection and decorative finish of concrete in inhabited interiors or commercial areas such as laboratories, sales rooms, offices and garages which have a light to medium mechanical and chemical load exposure.

As a water based epoxy resin, Koster CT 215 Universal Floor is suitable for coating dry or slightly damp surfaces.

By broadcasting with Koster Colour Chips and finishing with Koster TS Transparent a highly decorative finish is achieved for showrooms or other high-profile areas.

Can be used externally with good UV resistance, when broadcast with Koster Colour Chips or Kiln dried sand and finished with Koster TS Transparent.

Non-slip coating - The un-modified top coat of Koster CT 215 Universal floor has a slip resistance rating of R 10. With the addition of Koster Anti-Slip Granulate 20, the R value can be increased to R11 or R12

Scratch-resistant primer and epoxy floor finish for light to medium chemically and mechanically stressed floor and wall surfaces.

Features and benefits:

• Solvent-free, water based epoxy resin suitable for priming absorbent concrete surfaces and for the coloured coating of mineral wall and floor surfaces and for coating horizontal concrete surfaces.
• Thanks to its silky matt surface appearance, Koster CT 215 Universal Floor provides an easy-care surface, which can be customised to achieve a variety of floor finishes.
• Koster CT 215 Universal Floor is completely solvent-free so that the room air is not negatively affected.
• Koster CT 215 Universal Floor is water vapor permeable and can be used as a surface protection system in inhabited interiors.
• Slip Resistance from R10 to R12 depending on specification

Other colours are available upon request. Please contact the Koster technical team for assistance with specification - Technical@kosteruk.com.