Epoxy Floor - Koster CT 215 Universal Floor
Verified by manufacturer today
High-build floor finish
High-build floor finish
DoP
Certificate type
Scratch-resistant primer and epoxy floor finish for light to medium chemically and mechanically stressed floor and wall surfaces.
Application
Koster CT 215 Universal Floor is applicable in variable layer thicknesses between 0.2 mm (high-build coating) and 2 mm (self- levelling floor) for the protection and decorative finish of concrete in inhabited interiors or commercial areas such as laboratories, sales rooms, offices and garages which have a light to medium mechanical and chemical load exposure.
As a water based epoxy resin, Koster CT 215 Universal Floor is suitable for coating dry or slightly damp surfaces.
By broadcasting with Koster Colour Chips and finishing with Koster TS Transparent a highly decorative finish is achieved for showrooms or other high-profile areas.
Can be used externally with good UV resistance, when broadcast with Koster Colour Chips or Kiln dried sand and finished with Koster TS Transparent.
Non-slip coating - The un-modified top coat of Koster CT 215 Universal floor has a slip resistance rating of R 10. With the addition of Koster Anti-Slip Granulate 20, the R value can be increased to R11 or R12
Description
Scratch-resistant primer and epoxy floor finish for light to medium chemically and mechanically stressed floor and wall surfaces.
Features and benefits:
- Solvent-free, water based epoxy resin suitable for priming absorbent concrete surfaces and for the coloured coating of mineral wall and floor surfaces and for coating horizontal concrete surfaces.
- Thanks to its silky matt surface appearance, Koster CT 215 Universal Floor provides an easy-care surface, which can be customised to achieve a variety of floor finishes.
- Koster CT 215 Universal Floor is completely solvent-free so that the room air is not negatively affected.
- Koster CT 215 Universal Floor is water vapor permeable and can be used as a surface protection system in inhabited interiors.
- Slip Resistance from R10 to R12 depending on specification
Other colours are available upon request. Please contact the Koster technical team for assistance with specification - Technical@kosteruk.com.
General information
Color | Grey Beige Black Blue Bronze Manufacturer guidanceStandard Colours are Stone Grey (RAL 70030), Light Grey (RAL 7035), Pebble Grey (RAL 7032), Basalt Grey (RAL 7012). Most other Rap Colours are available on special order. |
Finish | Anti-slip |
Material | Epoxy resin |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year |
Uniclass | |
CAWS | M12/12 Resin flooring M12/110 Resin flooring |
Product range |
Specification data - Resin floor coatings
Third party product certification | Manufacturer's standard.Guidance for specification option:
|
Colour | Stone Grey (RAL 7030).Guidance for specification option: Standard colour. Light Grey (RAL 7035).Guidance for specification option: Standard colour. Pebble Grey (RAL 7032).Guidance for specification option: Standard colour. Basalt Grey (RAL 7012).Guidance for specification option: Standard colour. Other.Guidance for specification option: Most other RAL colours are available on special order. Consult manufacturer for options and insert requirements. |
Reaction to fire | Class Efl a). |
WaterTightnessRating | W3. |
Wear resistance | AR 0.5. |
TensileStrength | ≥1.5 N/mm² (failure in concrete). |
Impact resistance | IR 4. Guidance for specification option: (No cracks or delamination, class I.) |
Permeability | 0.1 kg/ (m²/h 0.5). Manufacturer guidanceCapillary water absorption and water permeability, w ‹ |
Viscosity | 1000 mPa·s. Manufacturer guidance(Approximate): |
Density | 1.6 g/cm³. Manufacturer guidance(Approximate): |
Substrate | Manufacturer's standard. Guidance for specification option: The surface must be clean, free of oil and grease and have a minimum tensile strength of 1.5 N/mm². Suitable surface preparation such as shot-blasting or grinding is required. |
Application method | Manufacturer's standard. Guidance for specification option: Primer Coat – Koster CT 121 diluted with 10% clean water. Topcoat – Koster CT 121 (undiluted). |
Mix | 6:1. Manufacturer guidanceMixing ratio: |
Pot life | One hour. Manufacturer guidance(Approximate): |
Overcoating | Overcoating can be applied after approximately 12 hours. Guidance for specification option: Depending on environmental conditions. |
Consumption (per layer applied) | 1.5 kg/m²/mm. Guidance for specification option: For further information see the system data sheet.
|
Cleaning | Clean tools immediately after use with water. Cured material must be mechanically removed. |
Storage | Store cool, but frost-free in closed containers. Guidance for specification option: The material can be stored for a minimum of 12 months at temperatures between +15 and +25°C. |
Safety | Manufacturer's standard. Guidance for specification option: Wear protective gloves and goggles. Observe all local, state, and federal safety guidelines while processing the material. |
Type | Hard-wearing floor coating for light to medium stress. |
Options | Not required. Koster Anti -Slip Granulate 20. Guidance for specification option: For increased slip resistance. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Germany |
Country of product manufacture | Germany |
Manufacturing plant location | |
Material | Epoxy resin |
Recyclability | No |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Expected Life | 15 year |
Third party certifications
Literature
Flow Chart - Koster Universal Floor
Koster Floor Coatings
Koster Moisture Control Systems for Concrete Floors
Koster Solvent Free Self Leveling Flooring
Koster Waterproofing Systems Company Brochure
Koster Waterproofing Systems: The Green Pages of Waterproofing and Construction Chemicals
Case studies
Aintree Racecourse - Koster Flooring Systems to Grandstand
Koster Floor coatings to a domestic garage.
Koster Flooring Systems - Protection to Concrete bund
Hasbury Methodist Church - Koster Flooring Systems
Koster Flooring Systems, 96 Middlesex St. London
Schneider Electronics Factory - Koster Flooring Systems
Underground Car Park - Koster flooring systems
Vapour Control Epoxy flooring to luxury basement in Surrey
Similar products from Koster Aquatecnic Ltd
Anti Static Floor Coating - Koster ESD 275