Suitable for healthcare settings. For the disposal of liquid and solid waste in connection with clinical procedures. Typical room applications include dirty utility and disposal. For use with panel or wall mounted taps.

Suitable for healthcare settings. For the disposal of liquid and solid waste in connection with clinical procedures. Typical room applications include dirty utility and disposal. For use with panel or wall mounted taps.

A DUHS hospital disposal unit manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel with a satin polish finish. The top is turned down on all four edges and incorporates a wet area recess. It is fitted with a sluice hopper at one end which can be suitable for either top entry or duct mounted services. The hopper has a 110 mm diameter outlet that can accept a P or S trap, available as an extra.

A wash up bowl is positioned next to the sluice hopper and is prepared for a 38 mm waste outlet. The wash up bowl does not have an overflow, however flush grated wastes are available as an extra. 9 litre capacity plastic cisterns with plastic downpipe are available and fitted with a 13 mm HP brass valve, plastic float and CP metal flushing lever handles. The unit should only be fed from a cistern or tank water supply.

The unit can be mounted on either stainless steel cantilever brackets, or stainless steel front leg supports. Front leg supports give a working height of 900 mm and have adjustable feet which can be screwed to the floor for extra stability.

Features and benefits:

• Grade 1.4301 (304) stainless steel.
• Left hand or right hand drainer (when facing the front of the unit).
• Mounted on brackets or front leg supports.
• Suitable for duct mounting.
• Manufactured in accordance with the old HTM64 standard and the Health Building Notes 00-10, part C.
• HBN 00-10 Part C compliant ref: DU HS

A DUHS hospital disposal unit manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel with a satin polish finish. The top is turned down on all four edges and incorporates a wet area recess. It is fitted with a sluice hopper at one end which can be suitable for either top entry or duct mounted services. The hopper has a 110 mm diameter outlet that can accept a P or S trap, available as an extra.

A wash up bowl is positioned next to the sluice hopper and is prepared for a 38 mm waste outlet. The wash up bowl does not have an overflow, however flush grated wastes are available as an extra. 9 litre capacity plastic cisterns with plastic downpipe are available and fitted with a 13 mm HP brass valve, plastic float and CP metal flushing lever handles. The unit should only be fed from a cistern or tank water supply.

The unit can be mounted on either stainless steel cantilever brackets, or stainless steel front leg supports. Front leg supports give a working height of 900 mm and have adjustable feet which can be screwed to the floor for extra stability.

Features and benefits:

• Grade 1.4301 (304) stainless steel.
• Left hand or right hand drainer (when facing the front of the unit).
• Mounted on brackets or front leg supports.
• Suitable for duct mounting.
• Manufactured in accordance with the old HTM64 standard and the Health Building Notes 00-10, part C.
• HBN 00-10 Part C compliant ref: DU HS