Metal sections

Flat strap diagonal bracing is used at frame corners and adjacent to openings of load bearing stud panels.

Combines the fuctions of purlin, cladding rail and gutter support when used at the eaves position. The top flange angle can be specified to slope upwards in 1 degree increments to a maximum of 30 degrees or downwards to 25 degrees. Generally used for monopitch or curved roof systems and also where a precise slope angle is required.

Flat strap lateral bracing is used on both sides of rapid dry envelope panels to support blocking and brace the panel.

The Alideck Supa Joist is an aluminium joist that has been designed as a standalone product to be used with Ali-Deck standard aluminium decking, slip-resistant aluminium decking and fire resistant balcony decking. It complements the Alideck System and enables super-fast installation times.

It can also be used as a standalone solution and can be used in conjunction with composite and timber decking options.

This all aluminium system is unique and modular, so it can be extended to any length, it can also be simply connected together to create double the span depending on the desired foundation spacings, please see the specifications tab for the loadings for the single joist span capabilities.

Unlike timber, it will not crack, warp, or swell, its impermeable to insects and deterioration, easy to cut and is fade and stain resistant.

The Alideck Low Joist is a strong aluminium support joist which has been designed to be paired with our aluminium balcony decking boards. The aluminium frames ensure a strong construction that is naturally rust resistant and fire resistant to A2-s1, d0. The aluminium is finished with QUALICOAT powder coating in a choice of textured sand and textured silver grey.

Galvanised steel panel joint rail G section to be used in conjunction with Zed and Cee section rails to provide support for horizontal cladding system joists utilising 140 mm fixing face. Available with long and short cleats to suit side rail system which can be supplied rivetted to the panel joint rail.

Galvanised steel floor sections which can be used as both primary beams and secondary joists within a mezzanine floor construction. Cleats are available to over sail the joists above the primary beams or inset within the primary beam depth. Available as standard in gauges up to 5mm.

Available depths: 125, 150, 175, 200, 225, 250, 300, 350, 400, 425, 450, 475, 500 mm.

Galvanised steel panel joint rail Cee section to be used in conjunction with Zed and Cee section rails to provide support for horizontal cladding system joists utilising 140 mm fixing face. Available with long and short cleats to suit side rail system which can be supplied rivetted to the panel joint rail. This section is not to be used at column location for rails less than 261 mm deep.

UltraZED purlin and side rail system, re-engineered from the ground up to be fully integrated and offer the most technically advanced profile available on the market; one that's easier to work with, delivers greater load bearing capacity, enhances air permeability within a building and delivers greater sustainability benefits.

A new profile with a choice of 59 purlin gauge and depth options, easily selected via our new DesignSuite Pro software. Generous 70 mm flat fixing face enhances sheeting installation and air permeability performance. CE Marking to BS EN 1090 execution class 4.

A range of purlin and cladding rail systems. Purlins to suit all types of modern roof construction with bay sizes up to 15 metres and rails designed specifically to support metal clad walls in horizontal or vertical applications.

Multibeam can be used with all types of modern roof cladding systems.
Requires fewer components than other systems.
Quick to assemble for faster project completion.
Large range of section depths and flange widths to suit all applications.
Gauge range 1.2mm through 2.7mm for economic solutions.
Spans up to 15 metres and bar lengths of 18 metres or more.

A range of purlin and cladding rail systems. Purlins to suit all types of modern roof construction with bay sizes up to 15 metres and rails designed specifically to support metal clad walls in horizontal or vertical applications.

Multibeam can be used with all types of modern roof cladding systems.
Requires fewer components than other systems.
Quick to assemble for faster project completion.
Large range of section depths and flange widths to suit all applications.
Gauge range 1.2mm through 2.7mm for economic solutions.
Spans up to 15 metres and bar lengths of 18 metres or more.

Structural door beam header generally used above roller shutter doors and at loading bays.