This project at Manchester Airport has now been completed by Monarch Resin Floors. The previous floor was a twenty year old tile and resin cementitious screed which was decaying and water damaged. Due to the level of decay and disrepair, the floor was dug out by a third party and re-concreted ready for the resin. Monarch installed 9mm thick FasTop TG69 polyurethane screed in 3 different colours to help the fire engines to see the tyre lines when they were reversing. White line marking was also installed.
The total area was about 600m2 and included six bays and six fire tenders.
Contact Sherwin-Williams by clicking the button below to find out which products were used in this case study.
The Copperworks in Leeds required a floor refurbishment over some 30000 square metres - Sherwin-Williams Resucoat HB product provided the solution.
Decorative and seamless flooring supplied for atrium area to Radclyffe School
Morrisons hot cross bun bakery gets long lasting flooring solution
Bright UV stable floor coating installed at Duxford Air Museum to show off aviation exhibits at their very best
© 2022 NBS Enterprises Ltd. All rights reserved.