LPS1175 Security Rated Bi-Folding Trackless Speed Gate
Verified by manufacturer 1 day ago
LPS 1175 Single Bi-Folding Gate A1 (SR1) – EAG50010S-A1
LPS 1175 Single Bi-Folding Gate A1 (SR1) – EAG50010S-A1
LPCB Certification
Certificate type
LPCB Certification
Certificate type
LPCB Certification
Certificate type
LPS1175 Trackless Bi-Folding Speed Gate - EAG50010S-A1/B3/C5 (single leaf) - EAG50010D-A1/B3/C5 (double leaf)
Application
Designed for applications where a certified level of protection is specified and mandatory, the security rated trackless bi-folding speed gate is specified for use across utilities and distribution environments, as well as commercial, government, and high-security residential sites including banks, embassies, warehouses, airports, schools, and universities, where automated, security rated bi-folding speed gates are a required element of the perimeter security strategy.
Description
The LPS1175 security rated trackless bi-folding speed gate features an integrated drive mechanism that controls the smooth, rapid opening and closing of the bi-folding gate. The system synchronises both gate leaves to deliver controlled, reliable operation without the need for a bottom or top track. This trackless design eliminates height restrictions and removes the requirement for large road-mounted tracks, while also delivering certified security to LPS1175 ratings A1 (SR1), B3 (SR2), and C5 (SR3), making it suitable for high-security applications.
Features & Benefits:
- Certified to LPS1175 and LPCB Red Book listed.
- Heavy duty hydraulic ram with PLC controlled slowdown in both opening and closing movement.
- Hydraulic automation, low maintenance with minimal moving parts.
- Smooth and quiet operation.
- Trackless design, no height restrictions and lower maintenance.
- Operates in approximately 10–15 seconds (through 90°).
- No additional locking device required.
- Powder-coated finish.
- Multiple infill options.
General information
Color | Other Manufacturer guidanceProducts can be powder-coated to any RAL or BS reference. |
Finish | Powder-coated Manufacturer guidanceStandard finish for mild steel fabrication:
|
Material | Steel |
Shape | Rectangle Square |
Width | Bespoke Manufacturer guidance
Note: Maximum width may be subject to limitation for some infill options due to weight, combination with height, or wind loadings. Please contact manufacturer for further guidance. |
Height | Bespoke Manufacturer guidanceTypically, the height of the gate is 2400 mm or 3000 mm but can be designed to bespoke requirements with the manufacturer's in house design team.
|
Warranty description | One year |
Uniclass | |
CAWS | Q50/15 Steel gate Q50/120 Steel gate Q50/20 Gate Q40/45 Proprietary gates Q40/40 Steel gates Q50/130 Gate Q40/570 Proprietary gates and posts Q40/560 Steel gates and posts |
SKU Code | EAG50010S-A1 |
Specification data - Carbon steel gates
Classification data | |
Product reference | LPS1175 Security Rated Bi-Folding Trackless Speed Gate. |
Performance characteristics | |
Security | LPS 1175: Issue 8, A1 (SR1). |
Dimensions | |
Span | 5000 mm. Guidance for specification option: Consult manufacturer and insert requirements. Maximum width 5000 mm applies to all single leaf variants. Maximum width 10,000mm applies to all double leaf variants. Note: maximum width may be subject to limitation for some infill options due to weight, combination with height, or wind loadings. |
Height | 2400 mm. 3000 mm. Bespoke. Guidance for specification option: Typically, the height of the gate is 2400 mm or 3000 mm but can be designed to bespoke requirements with the manufacturer's in house design team. Minimum heights apply for A1, B3 and C5 rating. Maximum height 5000 mm applies to all ratings. |
Posts | Rectangular hollow section (RHS) 400 x 200 mm. |
Gate leaves | Carbon steel. |
Hardware | |
Hinges | Required. Guidance for specification option: Heavy duty included. Thrust and needle bearings with grease points. |
Securing | Hydraulically locked in closed position. |
Operating | Automatic – PLC controlled hydraulic system. |
Finish as delivered | |
Worked finish | Blast cleaned, SA 2.5. |
Applied finish | Interpon D1036 Polyester powder-coated (PPC) (or equivalent). |
Drive/ Control | 100% duty cycle rated. Guidance for specification option: Anti-tail gate option. Controls housed in the posts with secure steel door. High quality heavy duty hinges incorporating sealed bearings for smooth and long life operation. Hydraulic power pack. Network capability for remote monitoring. PLC design with frequency invertor speed control. |
Access control | In accordance with LPS1175. |
Gate infill | Square hollow section (SHS) vertical bar. 358 mesh. Manufacturer guidanceInfill certified to LPS1175 A1 (SR1). |
Top protection | Not required. 34 mm serrated edges. Barbed tape. |
Format | Bi-folding. |
Method of operation | Powered operation. Guidance for specification option:
|
Primer | Interpon PZ790 (or equivalent). |
Accessories | Not required. Traffic lights. Laser scanner. Light curtain. |
Safety | Designed to DHF TS 013. Induction loop amp. CAT3 safety edges. Dual height photocells. Laser scanner (optional). Light curtain (optional). Traffic lights (recommended). |
Electrical supply | Requires 230 V; 16 A; 50 Hz. |
Foundation layout | Guidance for specification option: Consult manufacturer for details. Surface or sub-fix available. |
Sustainability data
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Manufacturing plant location | |
Material | Steel |
Expected Life | 15 year |
Product certifications
LPCB Certification
LPS1175 - C1572k-02 Eagle Automation Systems Ltd (EAG50010-A1)
LPCB Certification
LPS1175 - C1572m-01 Eagle Automation Systems Ltd (EAG50010-B3)
LPCB Certification
LPS1175 - C1572n-01 Eagle Automation Systems Ltd (EAG50010-C5)
Literature
LPS1175 Trackless Bi-Folding Speed Gate Data Sheet
Similar products from Eagle Automation Systems Ltd
Bi-folding Trackless Speed Gate
PAS68 Swing Gate, Challenger