HALFEN HD Socket Lifting System

Socket lifting system that conforms with MD 2006/42/EC and

EN 13155. Range of anchors, lifting links and accessories available.

Features and benefits:

• The load class, anchor length and manufacturer’s mark are clearly visible on the anchors to allow identification, even after concreting. This and the unique head shape ensure mix-ups with other systems are avoided.
• All anchors are sufficiently dimensioned to three times the safety factor for steel failure.
• All lifting clutches are sufficiently dimensioned to four times the safety factor for steel failure.
• Anchors are impact resistant down to -20°C
• Concrete cover 10–20 mm.
• Anchor also available in stainless steel (A4).
• CE marking according to MD 2006/42 EC.
• Smaller sleeve diameter with higher load capacity.
• Also for safe and reliably transport of large concrete components .
• Load classes from 1.3 to 25.0.
• Segment anchor for wind turbine towers.
• Integrated sleeve protector prevents ingress of water and dirt.
• Especially suitable for thin elements.
• Lightweight but robust lifting links.
• Only small recesses required in the component surface.
• Extensive range of anchor types.
• The anchors are made of specially tempered round steel to guarantee the best results and reliable safety in application – even under extreme conditions.
• The extensive range of accessories guarantees an economical solution for all applications.