Beam smoke detector using optical imaging technology.

Available in the following configurations:

Features and benefits:

OSID-DE:

Maximum detection range of 200 m.
Dual wavelength light emitting diode (LED) based smoke detection.
Optical imaging with complementary metal oxide semiconductor (CMOS) imaging chip.
On-board event log for fault and alarm diagnostics.
High tolerance to false alarm due to building movement.
High tolerance to transient dust, steam and intrusion of solid objects.
Easy alignment with large adjustment and viewing angles.
No need for precise alignment.
Tolerant of alignment drift.
Automatic commissioning in under ten minutes.
Simple DIP switch configuration.
Simple and easy maintenance requirements.
Three selectable alarm thresholds.
Status LEDs for Fire, Trouble and Power.
Conventional alarm interface for straightforward fire system integration.
CE (CPR & EMC)/ UKCA marked.

OSI-RE:

Combined transmitter and receiver unit, range 5–100 m.
Conventional model.
Receiver consists of a complementary metal oxide semiconductor (CMOS) imaging charge coupled device (CCD).
Wide 12° field of view.
Intuitive beam alignment indicated by directional arrows.
Single IR wavelength.
Highly resistant to building movement.
Resistant to strong light sources; does not alarm when saturated by sun.
Resistant to large solid intruding objects.
Automatic sensitivity threshold level setting.
50° horizontal and 20° vertical beam alignment.
Built-in heater.
Electronic simulated smoke test from ground level.
Standby, fault and alarm LED indicators visible from the front and bottom.
Automatic drift compensation.
Paintable cover.
Removable plug-in terminal blocks.
Optional heater kit available for the reflector.
CE (CPR & EMC). UKCA Certified.

XTRALIS OSID FM Certificate of Compliance