Tenmat’s VFB 60/60 Ventilated Fire Barriers are ’open state’ cavity fire barriers for ventilated cavities of up to 450mm. Each VFB 60/60 consists of a specially formulated fire rated stone mineral wool section with an integral high expansion intumescent seal fixed to the leading edge.

The VFB 60/60 then leaves a maximum 25mm air gap to allow for drainage and maintain ventilation in normal use. In a fire situation the intumescent seal rapidly expands to seal off the air gap and prevent vertical fire spread within the external wall.

The products have undergone extensive fire testing following the principles of BS EN1363-1 and in accordance with ASFP TGD19 (Fire Resistance Test for ‘Open-State’ Cavity Barriers).

The VFB 60/60s are mechanically fixed horizontally within ventilated cavities behind the external wall substrate following the fire compartment line. The VFB 60/60s are used horizontally and can be installed in conjunction with Tenmat NVFB Non-Ventilated Fire Barriers which provide vertical fire separation along fire compartment party wall lines.

Features and benefits:

3rd Party Certification - IFC Certification
CCPI Verified
Typical Fire Ratings of minimum 60 Minutes Integrity and Insulation
Higher Fire Ratings available dependent on application
Maintains a 25mm air gap
Up to 450mm cavities tested
Standard thickness of 75mm
Durability and Age Tested
Fixing brackets included as standard

VFB60/60 - Ventilated Cavity Fire Barrier 3rd Party Certification