A single ply multi-layer synthetic membrane based on flexible polyolefines (FPO) with an internal fabric and backing according to EN 13956. The roof membrane is hot air weldable, formulated for direct exposure and designed for use in all global climatic conditions.

System includes:

Waterproofing: Sarnafil® AT-18/ Sarnafil® AT-15 (Colour - Window Grey & Basalt Grey).
Waterproofing Attachment: Sarnaweld Mechanically Fixed System / Sarnafast Mechancically Fixed System / Sarnabar Mechanically Fixed System (subject to Sika® specification).
Insulation: Sikatherm® PIR AL Insulation / Sikatherm® PIR AL Tapered Insulation / Sikatherm® MW Insulation / Sikatherm® MW Tapered Insulation.
Insulation Attachment: Mechanically Fixed with Sika® SBT thermally broken tube fasteners and SBIW insulation washers
AVCL: SikaShield® VB E71 PE SA 2,4 mm/ SikaShield® VB P41 S 3mm / S-Vap 5000E SA.
Primer: Sika® Primer 610 Spray.

- Waterproofing:

Polymeric FPO membrane.
Resistant to UV exposure.
Resistant to permanent wind exposure.
Resistant to all common environmental influences.
Hot air weldable.
No open flame equipment required.
High dimensional stability from glass fleece inlay.
Resistant against impact load and hail.
Resistant to mechanical influences.
Resistant to root penetration.
Compatible with old bitumen.

- Waterproofing Attachment:

Mechanically fixed.

- Insulation:

Sikatherm® PIR AL is an insulation board for flat Roofing.

It is faced on both sides with an aluminium composite foil bonded to the insulation core and produces a tough, durable, light weight insulation board.

Sikatherm® MW / Tapered is an insulation board, faced with a mineral fibre tissue, bonded to the insulation core during the manufacturing process. The core of Sikatherm is high performance mineral wool with a typical density of 220 kg/m³ (top layer).

- Insulation Attachment:

Mechanically Fixed with Sika® SBT thermally broken tube fasteners and SBIW insulation washers.

- AVCL:

SikaShield® VB E71 PE SA is an SBS modified bituminous, self-adhesive air vapour control layer. It is reinforced with aluminium foil and a dimensionally stable non-woven polyester inlay. The underside has a removable liner over the adhesive compound for an easy application. It can be applied to wood, metal and concrete substrates. Top surface finish: sanded bitumen. Weight:~3.0 kg/m².
Sarnavap® 5000E SA is a multi-layer self-adhesive vapour control layer made of polymer modified bitumen with a glass-fibre mat reinforcement and an aluminium foil as top layer.
SikaShield® VB P41 S 3 mm is an APP modified bituminous roofing air & vapour control layer with a thickness of 3 mm and flexible at -10 °C. It is reinforced with aluminium foil and glass fibre to provide a barrier to the passage of air and vapour. The top surface is coated with sand to improve the bond to insulation boards with cold adhesives. The underside of the product has a burn-off film for easy torch-application. (Please refer to safe to torch guidance Safe2Torch (nfrc.co.uk)

- Primer:

Primer 600: Synthetic rubber and resins based primer.
Primer-610 Spray: Solvent-based synthetic-rubber bonding agent in a pressurized canister system.

Sarnafil AT Cradle to Cradle Certificate