A hot applied liquid waterproofing membrane system manufactured from a blend of bitumen and SBS polymers which, when combined with a glass fibre grid reinforcement and elastomeric bitumen membrane is suitable for use in protected / inverted roofs, plaza decks and green roof installations.

The PARABIT Hot Melt Compound is supplied in blocks, heated and then applied as a liquid directly to the prepared and primed structural deck. Correctly installed, the Parabit Solo membrane fully adhers to the substrate reducing the risk of water tracking beneath the membrane.

Features and benefits:

Ideal solution for concrete flat roof constructions
Fully adhered waterproofing membrane
Single layer application method
Incorporates SBS modified bitumen membranes
Rootbar Capsheets incorporating root inhibitors available for green roof applications
Complimentary ancillary products include expansion joint, angle reinforcement, insulation and water flow reducing membrane

System includes:

Siplast Primer.
PARABIT SOLO Reinforcing Grid.
PARABIT Hot Melt Compound.
Power Elastomeric 250 Sand*.
PARABIT Hot Melt Compound.
Power Elastomeric 250 Sand*.
Thermaweld Mineral Capsheet*.

* On green roof projects the equivalent Rootbar membrane is used instead.

Consult technical literature for further details. For Inverted roofs the Ravatherm XPS insulation board and Ravatherm XPS X MK Water Flow Reducing Layer is available. Suitable ballasting is required to restrain the inverted roof insulation board.

Applications:

Suitable for use in protected / inverted roofs, plaza and terrace decks and green & blue roof installations.
Designed for concrete substrates, it provides an optimum waterproofing solution, where large roof areas can be covered efficiently permitting the progression of other trades internally.
On green roofs the system is suitable with intensive lawn and planted roof gardens; extensive sedum, wildflower and biodiverse roofs.
Hydrocarbon solvent based products, such as Naphtha, paraffin and creosote will have a harmful effect and should not be allowed to come into contact with the material.

Parabit Solo Hot Melt Membrane