Radon-certified, flexible, single-component, cold-applied and seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls.

HydroBond 109-LM is puncture resistant with elasticity of 850% and a 95% recovery memory. The membrane becomes fully engaged into the substrate to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.

HydroBond 109-LM is available in two variants: Medium Viscosity, for use in warmer temperatures, and Low Viscosity, for when it is cooler. HydroBond 109-LM is also a constituent product of the Newton HydroBond® System supported by BDA Agrément Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 & 3 – BS 8102:2022.

Surface preparation is required, as is protection after application - consult manufacturer for details.

Features and benefits:

Fully-bonded seamless membrane.
Good elasticity with no shrinkage.
Medium/Low Viscosity variants instantly raintight when sprayed with HydroBond 109-LM Catalyst.
Primer not required for most substrates.
Complete vapour barrier.
Solvent free, non-toxic and odourless.
Non-flammable – No VOCs.
High radon gas resistance.

Curing:

Ready for next coat: At 5°C: After 24 hours; at 10°C: After 12 hours; at 15°C: After 2 hours; at 20°C: After 24 minutes; at 25°C: After 12 minutes.
To be kept rain-free: At 5°C: For 24 hours; at 10°C: For 12 hours; at 15°C: For 1 hour; at 20°C: For 30 minutes; at 25°C: For 30 minutes.
Ready for temporary foot traffic/ protection boards: At 5°C: After 24 hours; at 10°C: After 12 hours; at 15°C: After 2 hours; at 20°C: After 1 hour; at 25°C: After 1 hour.
Ready for flood/ hosepipe test: At 5°C: After 48 hours; at 10°C: After 24 hours; at 15°C: After 4 hours; at 20°C: After 3 hours; at 25°C: After 2 hours.
Fully cured: At 5°C: After 48 hours; at 10°C: After 24 hours; at 15°C: After 8 hours; at 20°C: After 5 hours; at 25°C: After 3 hours.

Newton HydroBond 109-LM - KIWA BDA Certificate