Manufactured from Marlon FSX longlife polycarbonate, this Reflex Glazing Unit is up to 200 times stronger than glass and has a 70 mm fixing flange as standard to suit almost any project requirement.

Polycarbonate glazing only unit, designed for refurbishment projects where only the glazing of the rooflight needs to be replaced.

Features and benefits:

Supplied with a fixing kit, including weathertight washers and cover plugs.
Manufactured from long-life polycarbonate, which provides a higher strength than glass.
High resistance to breakage and adverse weather conditions.
Has a modern, low rise profile which helps to allow a greater amount of daylight into buildings.
Class B non-fragility to ACR[M]001.
High resistance to wind and snow loads - consult manufacturer to view relevant technical data.
Minimized risk of condensation due to the constant separation of the glazing skins across the full width of dome.
Can be mechanically fixed to existing kerbs of varying dimensions without the use of a kerb adapter - consult manufacturer for details.
BBA certified.
Manufactured in accordance with BS EN ISO 12567-2: 2005.
Polycarbonate: The outer dome is manufactured from 3 mm impact resistant Marlon FSX Longlife polycarbonate sheet which is co-extruded with a UV protective coating to both sides. The inner domes are manufactured from 2 mm impact resistant Marlon FSX Longlife polycarbonate sheeting (for double and triple skin).
U-Value as low as 1.26 W/m2K
Overall shading coefficient: Double skin: 0.38–0.84; Triple skin: 0.34–0.76.

Mardome Reflex BBA 06-4385-ps4