The combination of the tongue and groove planks and high strength magnetic film creates a two-dimensional hold vertically and horizontally to a magnetically receptive raised access floor.

Magnetic sustainable wood flooring contributes towards sustainability assessment certifications, such as BREEAM, SKA and LEED, by earning credits for material reuse.

Improved circularity - Flooring can be easily reused, avoiding additional embodied carbon.

Designed for disassembly - Magnetic flooring maximises economic value and minimises environmental impacts through reuse, repair, remanufacture and recycling.

Asset protection- The subfloor remains undamaged, eliminating costly remedial or replacement work and reduced dilapidation costs.

STRONG, YET REVERSIBLE HOLD

• Powerful 2-dimensional hold.

• Tongue-and-groove mechanism locks planks together horizontally. A strong magnetic grip holds vertically to a magnetically receptive metal raised access floor.

SUSTAINABLE AND CIRCULAR – ADHESIVE FREE INSTALLATION

• Maximises economic value and minimises environmental impact.

• Wood flooring is sustainable and finishes are plant and water based.

• Easy to deconstruct, reuse, repurpose and recycle.

• Flooring can be reused, significantly reducing landfill waste and avoiding additional embedded carbon from new materials.

• No sub-floor contamination – no messy, expensive remediation work.

• The magnetic film is PVC, phthalate, plasticiser and VOC free.

IMPROVED HEALTH & WELLBEING

• VOC’s associated with wet adhesive installation methods are eliminated for improved Indoor Air Quality.

• Magnetic backing does not interfere with hearing loops, Wi-Fi or electronic devices.

FAST INSTALLATION

• Reduced labour time and cost – quick and clean to install and uplift.

• Minimal preparation required – no sealants, primers or plywood bases needed.

• The T&G planks require no additional pinning or fixing (providing installed to a level raised access floor).

• Reduced maintenance costs.

• Ease of access maintained.

DESIGN FLEXIBILITY

• 20 core products or choose from our bespoke range with 1000s of combinations of colours, textures, sizes and finishes available.

• Manufactured in the UK by WFA.

Tolerances

Width: +/- 0.2 mm.

Thickness (above T&G): +/- 0.2 mm.

Length: +/- 3 mm (Plank); +/- 0.2 mm (Herringbone and Chevron).

90° angle: +/- 0.3°.

Subfloor must be to British standard SR1 tolerance: maximum 3 mm over a 2 m straight edge. Lipping between access panels must not be greater than 0.5mm.

anels must be sound, dry, clean, free from contaminants and degreased if required prior to installing.

Magnetic Wood Flooring - Magnitude By WFA - FSC