The energystore+ range dramatically reduces embodied carbon, using sustainable bio-fuel sources during manufacturing. energystore+ is independently assessed and certified by REDcert², Europe’s leading certification scheme for sustainable biofuel sources.

Innovative insulation solution for beam and block floors enables project savings, thermal optimization and real-life performance.

Features and benefits:

Designed for maximum efficiency.
Reduced site waste.
No storage of off-cuts of material.
Lower cost than traditional infill blocks.
Improved programme speed.
Excellent thermal performance; no joints required.
Drill holes must be sized between 22—26 mm.
Robust Details for masonry construction satisfying Building Regulations Approved Document E - enabling a single product to be used within the cavity and the party wall.
Achieves REI45 fire resistance in accordance with BS EN 1363.
BRE GreenGuide A+ rating.
LABC warranty.
ISO9001, ISO14001, ISO45001 certificates.

Installation:

Level ground and build up external wall. With Superbead there’s no need for vents.
Lay DPM across ground and up inner leaf to meet the DPC.
Lay any buildings services necessary.
Install beam and block floor as normal.
Once the Beam and block floor has been installed the approved installer will drill holes following the Superbead drill pattern and then inject the insulation into the void beneath.
Floor is ready for screed and follow-on trades.

KIWA Agrement for energystore superbead beam + block