To Specify a full Intumescent Fire Protection Coating System C1-C4 (Primer + Intumescent + Topcoat) click on the link below and add to your Chorus Specification:

Intumescent Fire Protection Coating Systems (C1–C4) - C1–C4 Corrosivity & Fire Protection | Hempel A/S | NBS Source (thenbs.com)

To Specify a full Anti-Corrosion System C1-C5 (No Intumescent Fire Protection) (Primer + Topcoat) click on the link below and add to your Chorus Specification :

Anti-Corrosion Protective Coating System (C1–C5) - For Corrosive Environments | Hempel A/S | NBS Source (thenbs.com)

For further advice on Specifications please contact Ian Morton at iam@hempel.com

Hempafire Pro 315

A one component, solvent-borne, intumescent coating, optimized for 60 minutes for protection of structural steel against cellulosic fires.

Features and benefits:

It is suitable for in-shop and on-site applications.
Service temperature:-10°C (14°F) to 50°C (122°F).
Tested and approved according to EN13381-8 and BS 476-21 for up to 90 minutes fire protection.
CE marked product with European Technical Approval ETA 18/0689 according EAD 350405-00-1106.
The product is only available in white, but can be top coated with an approved topcoat in any colour.

Application method:

Airless spray.
Brush.

Drying time:

Determined for dry film thickness 750 micron (30 mils) at standard conditions. Indicative values at 20ºC; Surface dry: 15 minutes, Through-dry: 21 hours.