To Specify a full Intumescent Fire Protection Coating System C1-C4 (Primer + Intumescent + Topcoat) click on the link below and add to your Chorus Specification:

Intumescent Fire Protection Coating Systems (C1–C4) - C1–C4 Corrosivity & Fire Protection | Hempel A/S | NBS Source (thenbs.com)

To Specify a full Anti-Corrosion System C1-C5 (No Intumescent Fire Protection) (Primer + Topcoat) click on the link below and add to your Chorus Specification :

Anti-Corrosion Protective Coating System (C1–C5) - For Corrosive Environments | Hempel A/S | NBS Source (thenbs.com)

For further advice on Specifications please contact Ian Morton at iam@hempel.com

Hempacore AQ 48860

A one-component water-borne, chlorine free, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires.

Features and benefits:

Tested and approved according to EN 13381-8 and BS 476-21 for up to 90 minutes fire protection.
CE marked product with European Technical Assessment ETA 13/1054 according to ETAG018 Part 2.
It has no VOC (according to ISO 11890-2) and it is suitable for in-shop and on-site applications.
Service temperature: Indoor ambient conditions.

Application method:

Airless spray.
Brush.

Drying time:

Determined for dry film thickness 750 micron (30 mils) at standard conditions. Indicative values at 20ºC; Surface dry: 16 minutes, through-dry: 5 hours.