ITP FlameOUT® Block Class A is a limited-combustible Euroclass A2-s1,d0 rated air and vapour control layer (AVCL) Independently tested to EN-13501-1. ITP FlameOUT® Block Class A is especially suited to both high rise, 18 m+ in England and 11 m+ in Scotland and safety critical builds.

When used within wall and roof installations ITP FlameOUT® Block Class A prevents moisture within the building's warm air from reaching the insulation layer and forming interstitial condensation.

ITP FlameOUT® Block Class A has a glass reinforcement scrim which provides excellent tensile strength in wall and roof installations. The aluminium layer has a special protection coating to protect the aluminium layer from corrosion.

ITP FlameOUT® Block Class A contributes to both BS 9250 for the airtightness in ‘a well-sealed ceiling’ and BS 5250 aiding the control of condensation within a roof space.

Can be used in conjunction with Safe One® A2 breather membrane or Stamisol A1® breather membrane which are installed on the cold side of the building envelope.

Features and benefits:

Euroclass A2-s1,d0 Class A limited-combustible AVCL.
Independently tested to EN 13501-1
Compliant for use in high-rise and high-risk buildings.
Compliant to Approved Document B
Suitable for wall and roof applications.
High-performance protection against moisture.
W1 rating for water tightness.
Excellent tensile strength and nail tear resistance.
Suitable for use as a damp proof membrane.
CE approval.

Accessories:

ITP FlameOUT S/S sealing foil tape:

Single-sided tape used to seal thermo-reflective vapour barriers VCLs.

Size: 50 mm x 47.5 m.
Colour: silver.
Flame retardancy: Class 0, parts BS 476 Parts 6 and 7.
Thickness: 30 microns.
Temp range: -20°C to +70°C.
Installation range: +4°C to +35°C.

FlameOUT® Block Class A - CE Marking