NIBE F2050 is an intelligent, compact and inverter-controlled air/water heat pump with climate-friendly refrigerant. It provides optimised savings as it automatically adapts to output requirements. The heat pump works down to an outdoor temperature of –20°C and at the same time supplies up to 58°C in supply line temperature.

The F2050 is fully reversible, with the ability to provide cooling via a 2-pipe or 4-pipe distribution system. The effective cooling function allows the heat pump to deliver a comfortable indoor climate even at high outdoor temperatures.

The F2050 is available on the UK market as a monobloc ASHP. The hermetically sealed refrigeration circuit requires no on-site F-gas connections. In addition to this, the F2050 doesn't require filling with glycol anti-freeze, or the addition of anti-freeze valves, thanks to the intelligent NIBE S-series defrost control.

With a minimum system water volume of only 20 litres for the F2050-6 it is easy to design systems to remove the need of a buffer vessel, reducing install costs whilst saving install time and required plant space.

Features and benefits:

Compact heat pump that adapts to user requirements.
High capacity even down to -20°C and effective cooling function.
Energy-saving smart technology with user-friendly control.
R32 refrigerant with a GWP of 675
Efficient control system automatically adjusts the indoor climate for high comfort.
Available in two sizes F2050-6 and F2050-10.
Intended to be combined with one of the indoor modules VVM or the control modules SMO.
A wide range of system solutions and accessories.

Installation:

For full installation instructions please consult the products Installer Handbook.

Minimum Clearances:

The distance between F2050 and the house wall must be at least 150 mm.
The free space above F2050 must be at least 1000 mm.
The free space in front must be at least 1000 mm for future servicing.

Control Module

The NIBE S2125 requires pairing with a NIBE controller or hydraulic module, from the following:

SMO S40 - NIBE S-series controller and wiring centre, supporting:

Control of up to 8 x S2125 products in a single system.
Control of up to 8 flow temperature controlled heating/cooling zones with the NIBE Extra Climate System accessory.
Control of up to 8 x NIBE ERS Mechanical Ventilation Heat Recovery (MVHR) units.
Control of active cooling through either a 2-pipe or 4-pipe distribution system.
Control of bi-valiant heating systems utilising a secondary heat source as a back-up.
Wi-Fi enabled to allow for connectivity to the myUplink and myUplink PRO remote monitoring, control and diagnostics platforms for homeowners and installers.
Wireless connectivity to the range of myUplink smart home accessories for demand controlled ventilation, cooling and heating. Sensors include smart radiator valves in addition to wireless humidity, CO2 and temperature sensors.

NIBE VVM S320 Hydraulic Module

The NIBE VVM S320 hydraulic module is a packaged hot water cylinder containing all the same features and functionality as the SMO S40 controller. The packaged module includes the following integrated components within its 600x600mm footprint:

180 litre stainless steel Hot Water cylinder.
28 litre heating buffer vessel.
10 litre heating expansion vessel.
Flow meter for measuring heating and hot water energy production.
3-way diverter valve.
Primary and secondary circulation pumps.
4-stage, 7kW, emergency back-up heater.
S-series controller

F2050-10 HP Keymark - 012-C700142