Preformed DPC cavity tray for use at pitched roof/ gable abutments.

Features and benefits:

Attached, shaped flashing secured in bosem jaw.
Attached lead flashings available in short or long lengths to suit roof tiling/ slating details.
Designed to suit standard 75 mm high brickwork courses.
Lead flashings and trays are flush pointed as masonry is raised eliminating the need to rake out joints for insertion/ fixing of lead flashing.
Hinged, variable angle upstand accommodates a wide range of cavity widths.
Perform flashing - Temperature resistance: -20°C to +70°C.
Perform flashing - UV and Ozone resistant.

Range:

Catchment trays for building in at the bottom of a slope to catch water and direct it, via weepholes, to the outside of a masonry wall.
Intermediate trays available in either hand, and built in at each course over the length of an abutment rake.
Ridge trays used to straddle a roof ridge abutment.
External angles used in place of catchment trays when commencing laying from the corner of a building.
Internal angles used in place of catchment where gable rises from internal corner of masonry.

European Technical Approval - Cavity Trays