Sika MonoTop®-3020 is a one-part, cementitious polymer-modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations.

Features and benefits:

Uses recycled raw materials.
Layer thickness 1–5 mm.
Dust reduced compared with similar materials.
Applied up to 5 mm thick in one layer on vertical and horizontal applications.
Good surface finishing.
Low cracking sensitivity.
Sulphate resistant.
Hand and machine application (wet spray technique).
Very good resistance to water and chloride penetration.
Compatible with Sikagard® overcoat systems.
Ready to mix with water.
Does not contain chlorides or other corrosion promoting additives.
EuroClass A1 fire rating.
Class R3 of EN 1504-3.
Restoration work (Principle 3, method 3,1 and 3,3 of EN 1504-9). Repair of spalling and damaged concrete in infrastructure and superstructure works.
Preserving or restoring passivity (Principle 7, method 7,1 and 7,2 of EN 1504-9). Increasing cover with additional mortar and replacing contaminated or carbonated concrete.

Environmental information:

Environmental Product Declaration (EPD) in accordance with EN 15804. EPD independently verified by Institut für Bauen und Umwelt e.V. (IBU).
Specific Environmental Product Declaration (EPD) in accordance with EN 15804. EPD independently verified by BRE Global.

Approvals/ standards:

CE marking and declaration of performance based on EN 1504-3: Products and systems for the protection and repair of concrete structures — Structural and non-structural repair.

EPD - Sika MonoTop®-3020