SLIPSIL® embedded conduit inlet system is designed to go hand in hand with the CSD’S SLIPSIL sealing plugs range providing a total water & Gas tight seal. Embedded Conduit System is designed to enables the SLIPSIL range to be installed easily preventing any damage to the plugs during insertion and ensuring the plugs is not inserted too deep into the conduit opening.

SLIPSIL Sealing plugs can also be used for core drilled holes. The tolerances of the drilled hole should be within the tolerances of the plug series. Single plug can be installed on one side of the conduit only if required to providing water & Gas tight seal. However, for optimum sealing performance it is advisable that plugs are inserted each side of the conduit. Care should be taken that the ducted cable/pipe is not passed through the conduit opening at an angle. For horizontal ducts, it is extremely important to support the pipes properly at both sides of the conduit.

Features and benefits:

Provides flood protection and prevents gas migration.
Quick and easy to install in both horizontal & vertical ducts.
Age tested to prove 50 years of sealing protection
Prevents rodent ingress.
Resistant to Methane, Hydrogen Sulphide and Chlorine.
Certified up to 4 bar water pressure.
Flanges Prevents water tracking through concrete.

declaration of performance SLIPSIL (ETAG)