Bolton Gate offer a complete range of Security Rated options from SR1 through to SR5 rating.

The latest addition to our portfolio, are the SecRoll Security Roller Shutters offering A1, B3 & C5 security classifications equivalent to SR1, SR2 & SR3 respectively.

Providing a choice of ratings, these bespoke high security rolling shutters manufactured here in the UK are designed to provide flexibility for our Clients with a wide range of opening sizes and specification options including thermal and acoustic capabilities.

We are proud to confirm that our security shutters are registered in the BRE Global ‘Red Book Live’ confirming our products have been rigorously tested, assessed and approved by LPCB (Loss Prevention Certification Board) and that also the same high standard and quality production is maintained through the process of regular audits.

C5 Rated SecRoll SR3:

Operation:

Tubular motor:
- To suit 230-volt nominal, 1 phase supply.
- External safety brake.
- Low level keyswitch
Direct Drive Motor:
- To suit 400-volt nominal, 3 phase supply
- Integrated safety brake.
- Open, close, stop push buttons within low level control panel.

Arrangement:

Internally face fixed to brick, block, concrete or steel (i.e. rigid structures).

Locking:

A pair of side guide mounted pin locks are provided.
Over 3500 mm clear width, a centrally mounted ground lock (complete with padlock) is also provided (2no if >7000 mm).

Size parameters:

Minimum (width x height): 1 x 1 m.
Maximum (width x height): 10 x 10 m (direct drive motor); 7 x 4 m high.

Weight:

Varies with opening size dependent on lath/barrel/casing requirements but approximately 45 kgs/m².

B3 Rated SecRoll SR2:

Operation:

Tubular motor:
- To suit 230-volt nominal, 1 phase supply.
- External safety brake.
- Low level keyswitch.
Direct drive motor:
To suit 400-volt nominal, 3 phase supply.
Integrated safety brake.
Open, close, stop push buttons within low level control panel.

Arrangement:

Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).

Locking:

A pair of side guide mounted pin locks are provided.
Over 5000 mm clear width, a centrally mounted ground lock (complete with padlock) is also provided.

Size parameters:

Minimum (width x height): 1 x 1 m.
Maximum (width x height): 7 x 7 m (direct drive motor); 7 x 4 m (tube motor).

Weight:

Varies with opening size dependent on lath/barrel/casing requirements but approximately 45 kgs/m².

A1 Rated SecRoll SR1:

Operation:

Tubular motor:
- To suit 230-volt nominal, 1 phase supply.
- External safety brake.
- Low level keyswitch
Direct drive motor:
- To suit 400-volt nominal, 3 phase supply
- Integrated safety brake.
- Open, close, stop push buttons within low level control panel.

Arrangement:

Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).

Locking:

A pair of side guide mounted pin locks are provided.

Size parameters:

Minimum (width x height): 1 x 1 m.
Maximum (width x height): 7 x 7 m (direct drive motor); 7 x 4 m (tube motor).

Weight:

Varies with opening size dependent on lath/barrel/casing requirements but approximately 45 kgs/m².

Performance characteristics:

LPS1175 Issue 7 security standards—SR1, SR2 & SR3 options.
Resistance to Wind—Class 5
Options for:
Thermal Resistance – 1.1 W/(m²K) at centre / 3.2 W/(m²K) at quirks
Sound Reduction – 18 dB Rw (BS EN ISO 10140-2:2010 – Measurements of Airborne Sound Insulation)

Key attributes:

LPS 1175 Approved Security Rating.
High wind load capability.
Can provide both thermal and acoustic properties.
Bespoke manufacture to suit individual opening sizes.

Certificate of Product Approval - LPS1175 B3 (SR2)

Viewing archived certificate data