Linear open ceilings can be arranged in various configurations and can be easily fixed to the carrier. By choosing the different size and shape of panels, architects can create an extensive range of designs by designing open joints that leave small gaps between the panels

Features and benefits:

All ceiling systems are tested for resistance to wind loads.
Panels can be supplied in any length up to 6000 mm (as standard), have a thickness of 0.6 mm and are made from a high-corrosion resistant aluminium alloy.
The panels are standard finished with the patented Luxacote® paint system.

70U:

70 mm wide box shaped panels with 30 mm open joints that enhance the linear appearance.
Fixing clips fitted on the carriers between the panels provide a secure locking of the panels.
Easily demountable panels and fixing clips allowing full access to services and equipment in plenum.

80B/84B:

80 mm/ 84 mm wide, boxed shaped panels with 20 mm/ 16 mm joints that enhance the linear look.
The panels are easily clipped onto the 80B/ 84B aluminium carrier.
If required, the panels can be locked on the carrier with a special fixing clip fitting into the joint of the panels.

84R:

84 mm wide round edged panels with 16 mm joints that enhance the linear appearance.
Panels combined with join profiles provide a visually closed ceiling.
If required, the panels can be locked on the carrier with a special fixing clip fitting into the joint of the panels.

C2C Material Health (Metal)