The sliding door set to be formed from non-thermal aluminium extruded box section and to include a frame that fits within the structural opening, consisting of two jambs (152 x 47 mm profiles) and a specifically designed 165 x 178 mm integral transom bar with reinforced fixing points to accept multiple tracks and heavy doors.

The sliding doors (fast and slow) are connected by a unique sequencing device to allow the doors to function as one. The primary sliding door (fast) is prepared to accept a floating bottom guide connected to the secondary panel. Sliding doors fabricated from various profiles using 100 x 47 mm rails and 55 x 47 mm stiles. The aluminium profiles will accept various glazing options including integral blinds.

The doors to slide over a glazed screen which is secured within the frame structure by two concealed aluminium channels. Glass is secured using appropriate beads and gaskets.

Stainless steel carriers connect the doors to a 'low friction' recirculating bearing system sliding in an aluminium track. 'Damper' mechanisms (not self or soft-closing) are active when the sliding doors are at the closed and fully open positions. The pelmet conceals the track and has a 'hold-open' lid for ease of maintenance.

Durability – The sliding door tested to 1,000,000 cycles exceeding the requirements of BS EN1527:2019.

Sustainability – EPD verified to EN 15804:2019.

BREG EN EPD 000633 - FM T100 & T55