Armourcoat Spatulata is a natural lime and marble polished plaster with an extremely smooth surface for use on walls and ceilings. It is a superfine, high gloss finish with non-directional patternation from the trowel application.

The lime putty based plaster is vapour-permeable and as such is suitable for traditional plastered masonry, including historic buildings.

It comes with Eco Wax (or black wax for deep tones) applied as standard for increased protection against soiling. For breathable water repellency, specify with Armoursil Impregnator + Aquawax.

It is also available to be used as a system with Armourcoat® AntiCrack reinforced gypsum skim coat. Please see specification data for more details.

Product attributes:

Low VOC content. Certification: ASTM D2369: <1g/L | French VOC Label: A+ | BREEAM International v2.0 (2016): Basic.
Very limited combustibility: EN 13501-1:2007 + A1:2009: A2 - S1, D0 | ASTM E84-84: Class 1.
Resistant to mould and mildew: ASTM D3273 + 3274: 10/10/10.
Low embodied carbon: 0.36kg CO2e/m2 (A1-A3).
Durable surface: Shore D hardness 74 | Impact resistance to ASTM D 2794: Two-inch pounds | Pencil hardness to ASTM D 3363: 5H | Wet scrub resistance to ASTM D 2486: Exceeding 1000 cycles.
Manufactured in the UK.
Colour matching service available.
Seamless, hand applied finish.
Suitable for use with Armourcoat Anticrack, a reinforced gypsum skim-coat plaster which resists cracking at board joints and significantly improves impact resistance and durability of plasterboard construction. AntiCrack is a preparatory product that removes the need to use a gypsum skimcoat or tape and joint unprepared plasterboard walls.

Armourcoat Polished Plaster Spatulata - Environmental Product Declaration