Rainscreen cladding system using folded metal planks secretly fixed on the plank returns with aluminium clips allowing for a larger plank face and joint detail.

Features and benefits:

For a striking and bespoke linear design.
A bottom-to-top system when installed horizontally, meaning the install starts at the bottom of the elevation and each plank locks in to the clip below.
The horizontal and vertical Hilti-Eurofox subframe will accommodate the planks being installed in any orientation whilst applying the same clip fixing method.
CWCT tested horizontal and vertical fix.
A1 or A2 panel fire ratings.
Available in wide choice of materials, colours and finishes including polyester powder-coated, anodized, Corten and Rimex.
Supports plank sizes with face heights of 150–450 mm, up to 6400 mm long and thickness of 1, 1.2, 1.5 or 2 mm.
Horizontal joint: 10–20 mm.
Vertical joint: Open, closed return or butt strap.
Fixings: Self drill mechanical fix.
Install method: Bottom to top.
Fixing centres: 750 mm maximum.

A typical system comprises:

Aluminium support brackets, attached to outer wall substrate.
Rear ventilated cavity - provides additional weather performance benefits.
Aluminium carrier system.
Aluminium or polyamide clip.
High performance rainscreen cladding panels (planks).

2mm CPS CWCT