ShieldTEC hot melt waterproofing system is a specially formulated combination of high quality bitumen, synthetic rubbers, lightweight fillers and other additives, which is hot-applied with carefully selected reinforcement fabrics and protection layers to give a monolithic waterproofing system.

Components:

ShieldPRIME - A brush or roller applied bituminous priming solution for the preparation of cementitious surfaces to receive ShieldTEC monolithic membrane.
ShieldTEC Monolithic Hot Melt - A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives.
ShieldFLEECE - A non-woven polyester reinforcement fleece with a nominal weight of 50 g/m² which is embedded between the two layers of ShieldTEC compound.
ShieldTEC PS2 - Sanded roof access layer, ShieldTEC PS4 - Underlay or ShieldTEC PS5 - Mineral cap sheet or ShieldROOT M - Root-resistant protection membrane.

Features and benefits:

Hot applied system.
Suitable for completely flat (zero falls) decks.
BBA Certified No. 17/5459.
Outstanding durability – lasts the life of the building. Nominal system thickness of 10 mm.
Tough and resistant to impact damage.
High bond strength to substrate - High tensile strength.
Monolithic application.
Rapid setting – resistant to rain, snow and frost immediately after application.
Fully bonded system – Non-tracking.

17/5459 ShieldTEC Inverted Hotmelt System