"air ductwork ancillaries"

1,826 results found

Sort by:

Showing 1-36 of 99

AIM OSCB 44mm Air Gap Datasheets

AIM OSCB 44mm Air Gap Datasheets

AIM

AIM OSCB 44mm Air Gap Datasheets 60min and 120min insulation & integrity
AIM OSCB 25mm Air Gap Datasheets

AIM OSCB 25mm Air Gap Datasheets

AIM

Technical Datasheet and Installation Instructions for AIM OSCB 60-25 and 120-25
Cast Iron Louvre Air Bricks

Cast Iron Louvre Air Bricks

Cast Iron Air Brick Company

The louvre cast iron air bricks are almost exclusively used in external positions. The great advantage of this type of air brick is its ability to deflect driving rain and also to reduce the possibility of back draught in exposed conditions. Cast iron louvre air bricks are made from grey iron, cast in UK in sand moulds bonded with resin to a fine cast finish and are available in two sizes (9x6 and 9x9) The air brick is constructed from grey cast iron and is used for supplying natural ventilation to interior rooms and also as an extractor outlet vent grille over core drilled duct holes. In this instance the louvre air bricks are used as the terminal grille for fans extracting air from living rooms, kitchens, bathrooms,WCs and hob extractors.
Cast Iron Hit and Miss Air Bricks

Cast Iron Hit and Miss Air Bricks

Cast Iron Air Brick Company

Used equally as an internal or external vent during Victorian times to supply natural ventilation to interior rooms especially those with open fires. It is now mainly used in period properties to replace defective vents and anywhere where there is an exposed position facing the prevailing wind.
Cast Iron Metric Windsor Air Bricks

Cast Iron Metric Windsor Air Bricks

Cast Iron Air Brick Company

Windsor metric air bricks allow specifiers to link our traditional cast iron products with 21st century ducting using the Rytons range. Rather than replacing ugly plastic metric air bricks when the builders have gone with the Windsor cast iron its far easier, more cost effective and creates a much better impression with clients to install them during the build. They are available in just one size but are interlocking and are predominately used singularly, double or triple. Our metric Windsor air bricks are the only cast iron air bricks fully interlocking with modern metric cavity wall sleeves and periscopes and are exclusive to the cast iron air brick company.
Cast Iron Fly Screen Air Bricks

Cast Iron Fly Screen Air Bricks

Cast Iron Air Brick Company

A period property cast iron air brick made in three parts suitable for bug and rodent protection. Consists of cast iron square hole front, copper fly mesh and cast iron frame all secured together with 4 stainless steel machine screws. Large cast iron square holes on the front plate allow for generous free area despite the mesh being fitted. Mainly used as an exterior air brick to supply natural ventilation to interior rooms and also sub floor ventilation to prevent damp and dry rot. It can also be used as an extractor outlet vent grille over ducting. The larger FLY9 is especially useful for providing higher volume ventilation for properties with damp and condensation problems.
Cast Iron Air Brick Company Product and Price List

Cast Iron Air Brick Company Product and Price List

Cast Iron Air Brick Company

cast iron air brick company price list
NEW AIM OSCB Range - Open State Cavity Barriers

NEW AIM OSCB Range - Open State Cavity Barriers

AIM

Extended cavity fire barrier performance within rainscreen façades. Responding to changing market requirements, AIM has developed a range of four OSCBs which provide up to 120 minutes integrity and insulation in the event of a fire. OSCBs are a polythene sleeved ROCKWOOL® stone wool and intumescent material designed for use within open state cavities (e.g. Rainscreen systems), allowing ventilation and drainage of the cavity under service conditions while providing up to 120 minutes insulation and integrity performance
Cast Iron Air Bricks Single Brick Sized (nom 9x3 inch)

Cast Iron Air Bricks Single Brick Sized (nom 9x3 inch)

Cast Iron Air Brick Company

Mainly used as an exterior air brick in the place of a clay brick. The single air brick can be used to provide air under suspended floors and for room ventilation to reduce condensation or provide combustion air for solid fuel appliances. . One of the simplest and our earliest design is the grid pattern air brick. It was a design used during Georgian and Victorian period and its no surprise that weve supplied many fine and glamorous properties across the country (including Royal crescent, Bath) as well as hundreds of simple single fronted terraced houses. Weve supplied the REG3 for Maccreanor Lavingtons restoration of a Bastwick street property in London. The MAX3 with 7800mm2 free area of ventilation is our most efficient single air brick as its name suggests.
Cast Iron Air Bricks Triple Brick Sized (nom 9x9 inch)

Cast Iron Air Bricks Triple Brick Sized (nom 9x9 inch)

Cast Iron Air Brick Company

The triple sized cast iron air bricks are made from grey iron, cast in sand moulds bonded with resin to a fine cast finish. Here we look at the seven different types of our largest triple air bricks and the 12 x 6 inch. Mainly used as exterior air bricks for large properties and commercial buildings, the triple air brick is predominantly used to supply room ventilation especially for combustion of solid fuel appliances and to reduce condensation. They are also suitable for use as extractor ventilation grilles from kitchens and exhaust grilles for restaurants and commercial premises. These large air bricks can often be found installed in external buildings, garages and workshops and period industrial buildings especially around Victorian era.
Cast Iron Air Bricks Double Brick Sized (nom 9x6 inch)

Cast Iron Air Bricks Double Brick Sized (nom 9x6 inch)

Cast Iron Air Brick Company

Cast iron air bricks are ideal for installation in period properties and building renovation. They are made from grey iron, cast in sand moulds to a fine cast finish and can be supplied bare or painted. Mainly for exterior use, the double air brick can be used to provide air under suspended floors, for room ventilation to reduce condensation or provide combustion air for solid fuel appliances. The air bricks are mortared into the walls in the place of two bricks and designed to sit flush with surrounding brick work. The double air brick is often used in larger properties to provide additional ventilation for reduction of condensation and damp. Here we look at the eight different types of double air bricks commissioned by us from English and Scottish foundries
Flexi Everyday - Ancillary Products

Flexi Everyday - Ancillary Products

Flexi Support Systems from Pump House

Delta Ancillary Product Brochure

Delta Ancillary Product Brochure

Delta Membrane Systems Ltd

At Delta, we recognise the need to offer our customers a complete solution to Type C Waterproofing Systems. Our ancillary product range ensures we deliver. Type C Waterproofing ancillary products which work with Cavity Drainage Systems in basements and below ground construction.
Project - Architectural Ancillary Hardware

Project - Architectural Ancillary Hardware

Hafele UK Ltd

Ancillary hardware product guide is designed to provide you with the latest technical specs of our main door specification products. We also offer bespoke solutions if you can’t find what you need.
Using Cast Iron Imperial 9x3 Air Bricks with Metric Cavity Wall Duct and Periscope

Using Cast Iron Imperial 9x3 Air Bricks with Metric Cavity Wall Duct and Periscope

Cast Iron Air Brick Company

Imperial air bricks are about the size of a Victorian brick which is around 9 x 3 inch or 225 x 75mm. They are quite a bit smaller than a metric air brick which is 8 ½ x 2 ½ inch or 213 x 66mm. The Cast Iron Air Brick Company have therefore designed an aluminium adapter to convert the metric duct so it will engage with many of the imperial air bricks we have. We call the adapter the metimp the name which conveniently translates to metric imperial. It is essential to use the adapter to connect all our 9x3 air bricks to metric ducting where the air brick doesnt have a cutaway frame. Please see the specification guidance for full details of each design.
15. Specification Guide - Ancillary Product Range

15. Specification Guide - Ancillary Product Range

Deceuninck Ltd

Frame add-ons, couplers, external cills, Approved Document M compliant low thresholds, compatible with Deceuninck windows and doors
Pavetuf - Paving Installation, Maintenance and Ancillary Products

Pavetuf - Paving Installation, Maintenance and Ancillary Products

Talasey Group Ltd

Pavetuf is a range of products designed to support the installation, maintenance and protection of your hard landscaping. An established range of products, Pavetuf includes: A priming slurry to provide a secure bond between a new mortar base and stone or porcelain paving. Two jointing options and a squeegee to joint paved areas. Four porcelain Pavetuf jointing grouts. A high performance cutting blade for porcelain. A range of Pavetuf risers for paving and decking. A range of sealants to help protect paving from staining, each offering a different finish and look. A range of specialist cleaners, each designed to tackle different types of stains for a range of different landscaping materials. A range of aluminium Pavetuf edgings.
MemTech Pro Void Vent 25 Ancillary Brochure

MemTech Pro Void Vent 25 Ancillary Brochure

Delta Membrane Systems Ltd

The MemTech gas protection range provides a comprehensive spectrum of gas protection products and ancillaries to protect buildings and structures from ground gases such as Radon, Methane Carbon Dioxide and VOCs conforming to the requirements of BS 8485:2015+A1:20019, for both above and below ground applications. MemTech Membranes offer solutions to properties, construction sites and land which is affected by contamination. Our ground gas protection ventilation products are suitable for a variety of construction methods. Gas venting systems such as the Pro Void Vent 25 range will safely release harmful ground gases from beneath structures into the atmosphere.
Ecoplan Rooflight

Ecoplan Rooflight

Kingspan Light + Air

The Ecoplan system is a single or double pitch self-supporting aluminium rooflight system. A number of polycarbonate glazing options are available delivering maximum flexibility to meet a variety of project requirements. Ecoplans flexible modular design adapts well to all architectural concepts to enhance the building envelope roof or facade.
Kingspan Eura-R

Kingspan Eura-R

Kingspan Light + Air

Kingspan Eura-R is a variation of the standard Eura and is designed to incorporate rainproof side louvres. The Eura-R is therefore ideal for all-weather day-to-day ventilation as well as smoke & heat exhaust. The structure has integrated rain gutters for controlled water drainage. Like the Eura this product can be customised with a variety of base and flange designs. Applications: atria, shopping centres, industrial buildings, train stations and ports.
Kingspan Sky-XS

Kingspan Sky-XS

Kingspan Light + Air

Legislation is becoming increasingly tight with regard to the safety of roof access. These measures are designed to vouch for the safety of mechanics while performing installation and maintenance on roofs. The Sky-XS roof access hatch is therefore equipped with an easy to open/close hatch, which was developed not only all safety requirements applicable, but also the latest wishes in the area of energy performance.
Kingspan BA-4 system

Kingspan BA-4 system

Kingspan Light + Air

With this rod system, the glazing is 4-sided supported. Depending on the selected cover profile, the glazing can be clamped 2- or 4-sided. This system can be combined with large glazing sizes and has an excellent air and water tightness. The Kingspan BA-4 system also forms the basis of the Structural, High Efficiency, Rubber on Steel, Curved, Fire-Resistant and Sliding roof systems. Application Glass roofs in all possible shapes and curtain walls in insulated and non-insulated version.
Kingspan BA-Economy

Kingspan BA-Economy

Kingspan Light + Air

Glass roof profile system with four-sided support. This system has excellent air and water tightness. The bottom profile consists of an extruded profile sealed with insulation and a drip rail. The bearing profile is tapered. This enables the drip rail to be made extremely small. The Economy system is applicable both as an insulated and an uninsulated lean-to roof or pitched roof at inclinations larger than 10° and with centre-to-centre sizes up to 1200 mm.
Kingspan Estra

Kingspan Estra

Kingspan Light + Air

Glass louvred ventilator suitable for daily ventilation as well as smoke and heat extraction in facades. Kingspan Estra is a transparent glass louvre system which is fitted vertically, and is suitable for both daily ventilation and smoke & heat extraction. Estra TG Roof is also applicable for sloped application. The Estras aesthetic and sleek design means that it really comes into its own in projects featuring substantial amounts of glass. The Estra has thermally separated profile sections, and is available with either single or double glazing. The choice of louvres available includes point-fixed, circumferentially framed and (semi-)structural glazing. Fields of application: atriums, shopping centres, industrial buildings and offices.
Kingspan Optima

Kingspan Optima

Kingspan Light + Air

The Optima is the most energy-efficient louvred ventilator for both smoke and heat exhaustion and ventilation. The Optima offers an optimum contribution to the fire safety, comfort and energy management of a property and is perfect for use in sustainable buildings. In contrast to other louvred ventilators, the Optima is completely thermally separated. Not only the louvres, but also the base gutter construction are thermally insulated, thereby combining the advantages of a louvred ventilator and the unique performance of a double flap ventilator.
Kingspan Arcilite Glass Roof Structure

Kingspan Arcilite Glass Roof Structure

Kingspan Light + Air

The thermally broken Arcilite glass roof structure is specially developed for standard forms such as pyramid, single pitch and double pitch with an angle of 15°, 30° or 45°. It is an easy glass structure with a self-supporting ridge structure combining durability, attractive pricing and easy assembly. Whats more, it allows for the trouble-free and aesthetic integration of smoke and heat exhaust ventilation windows and ventilators.
Kingspan Eura & Eura Excellent

Kingspan Eura & Eura Excellent

Kingspan Light + Air

Kingspan Eura and Eura Excellent is a multifunctional louvred ventilator that extracts large volumes of warm air and smoke within a short period of time. The Eura is both suitable for air supply (façade) and air extraction (façade and roof). The fail-safe Eura is available with a variety of louvre types, including a translucent design. The system offers a favourable price/performance ratio. Application: from industrial buildings and offices to shopping centres and atria.
Kingspan Incendia

Kingspan Incendia

Kingspan Light + Air

Kingspan Incendia is an EN 12101-2 certified mono flap system and is suitable for the extraction of smoke and heat, daily ventilation and for daylight ingress. Its large dimensions, a geometric surface of up to 5.1 m2, makes the Incendia ideally suited to the effective extraction of significant quantities of (polluted) hot air and smoke. This flap ventilator is available with a safety mesh to prevent falls when open, and can be manufactured in any desired intermediate dimensions and is suitable for a flat (0-15°) build-in application. Area of application: particularly suitable for staircases, distribution centres, warehouses and production environments.
The Passive Fire Protection Handbook: Chapter 6 - Fire Rated Ductwork

The Passive Fire Protection Handbook: Chapter 6 - Fire Rated Ductwork

Promat UK

The relative complexity of any ductwork system which is passing through different fire compartments and the relevance of the system’s function in ambient and fire conditions can make the selection of a suitable ductwork system difficult. This section of the handbook aims to give guidance on the fire performance requirements of ductwork and offers a wide range of solutions for proprietary “off the shelf” fire rated ductwork, the protection of steel ductwork and for self-supporting systems using Promat PROMATECT®-L500.
Indoor air quality

Indoor air quality

Barrisol

Certifications
QBIUM Air Filtration

QBIUM Air Filtration

SB Joinery UK Ltd

Quality Insulation Converters

Quality Insulation Converters

AIM

This document details the range of fire, thermal and acoustic products including fire stop strips and blocks, intumescent strips, cavity fire barriers and acoustic floor slabs.
Glidevale Protect Viking Air LR Air & Vapour Permeable Underlay

Glidevale Protect Viking Air LR Air & Vapour Permeable Underlay

BPD Building Product Design Ltd

Glidevale Protect Viking Air LR Technical Literature
Mechanical Air Extraction & Ventilation

Mechanical Air Extraction & Ventilation

Duco Ventilation & Sun Control NV

The DucoBox Silent, combined with exhaust vents, ensures efficient mechanical extraction of stale and/or moist air. As far as exhaust vents are concerned, you can choose between a basic version (DucoVent Basic) and an aesthetic version (DucoVent Design). In addition to this, with the Intelli Air Valve, Duco has a compact system available for common exhaust in high-rise as well as multiple dwelling buildings, student accommodation or non-residential property.
Indoor Air Comfort Gold

Indoor Air Comfort Gold

Polyflor Ltd

Homogeneous flooring
Indoor Air Comfort Gold

Indoor Air Comfort Gold

Polyflor Ltd

Polyflor Luxury Vinyl Tiles

Showing 1-36 of 99

Feedback