"timber frame"

Timber Cladding: NORclad Painted ThermowoodCoating: Sansin SDF Paint SystemNORclad supplied over 18,500/LM of Painted product for this project, primarily across 3 different finished widths; 120mm (6500LM), 136mm (6100LM), and 178mm (4800/LM). A couple of additional board sizes were also supplied for reveals and particular detailing areas.Thermowood is the perfect Timber species for coating, being a timber with almost zero moisture movement the chance of coating failures is minimal. Supplied pre-finished with the Sansin SDF system, the material was ready to be installed as soon as it was delivered to site.

Take a look at how the ROOFTRAK™ IFP was used on this newly built annexe to help achieve a remarkable timber cladding finish.

Redriff Primary School is a large school in Southwark, London that teaches children from the age of 3 to 11. In July 2013, they contacted us because they required a wall mounted timber canopy to be installed in their playground that would enable their children to play and learn outside all year round.

Roof terrace on the third floor of a residential block. The customer wanted a floating deck but was keen to source decking that could be easily installed. They needed to deal with a slope and variation in the surface, as well as easy access to a drain. Wallbarn recommended their Cumuru hardwood timber tiles which being 500mm x 500mm x 30mm, which are highly portable and perfect for low threshold retro-fits. To deal with the variation in surfaces around the deck, we recommended laying the timber tiles onto our ‘Balance’ self-levelling pedestals. Total installation time: 3 hours

This project involved a penthouse with a huge roof terrace. The existing deck was dilapidated and needed complete replacement. The existing decking needed to be lifted, cut up and removed. The terrace was jet-washed and sealed. Using ipe tiles on top of adjustable pedestals keeps the tiles out of standing water and creates space underneath for cables, etc. Rooftop terraces are difficult to access. 500x500mm timber tiles are much easier to manually handle and transport than long plank decking. The tiles aren’t fixed to the pedestals, making them future-proofed.

Local resources, local suppliers and sustainable wood-based materials were the requirements for this 18-storey building in Brumunddal. Located 140 km north of Oslo, Mjøstårnet is tallest cross laminated timber (CLT) building in the world and is celebrated by the international construction industry as a first-class engineering achievement.

Longwater Reach is a collection of 74 two, three and four bedroom houses at Green Park Village being created by St Edward, part of the Berkeley Group. Exterior design traits include classic HardiePlank® weatherboarding in colours including Arctic White and Midnight Black, providing a natural timber effect, long-lasting durability and a stunning finish. Coloured matched finely-finished balconies and window frames complete the look, with natural landscaping and pathways, all designed to blend in to the development’s calming waterside backdrop.

We were contacted by a customer in Bucharest trying to source our Ipe Timber Tiles. He was concerned about durability as Romania has extremes of hot and cold, and torrential rainfall. We reassured him that even with a minimum gap drainage would be sufficient and the suspended tiles system would ensure longevity. He selected the Ipe timber tiles mounted onto fixed height 14mm Plastic Pad. To protect against the extreme weather the tiles were then treated with a generic wood preserve on site, giving them a rich, luxurious finish and producing the "treasure chest" George Ezra would be proud of. https://www.wallbarn.com/case-study/timber-tiles-cata-romania/

Our client wanted a low maintenance but high quality finish for the balconies on a build of high end flats and penthouses.Castlewood composite decking was chosen as it provides good slip resistance and a very luxurious finish. Our composite decking is very low maintenance due to the unique polymer cap that is applied to the decking boards during production. This particular deck board is supplied with a 25 year limited warranty for domestic applications and a 10 year limited warranty for commercial applications. Terms and conditions apply.Our aluminium substructure system was chosen as it is quick and easy to install and will never rot like traditional timber joists. The balconies also had very low thresholds in some areas that could not have been overcome with traditional timber joists.The aluminium substructure was assembled in frames with joists running at 400mm apart to provide adequate support for the composite boards. Additional joists were also installed to support the ends of each decking board where two ends meet.Each aluminium frame was then laid on our DD adjustable pedestals to make them completely level. Decking boards were then secured to the aluminium with our unique fasteners that work with our boards and aluminium profiles.If you have a project that may require this system please get in touch with your dimensions and we will happily provide a quotation for everything required.

NORclad supplied almost 1000m2 of the PEFC certified Thermowood for this project back in 2021, a new purpose-built £8m GP surgery in Crediton.Offering residents a much wider range of services than they were able to receive in the town and enables it to cope with a growing population.The official ribbon-cutting opening ceremony at Redlands Primary Care, located on Joseph Locke Way took place in October ’21.A number of areas of the project required the timber to meet EuroClass B, NORclad are able to offer this as a service to the timber, under factory controlled conditions. This allows the timber to be used as soon as it arrives on site.

SMET Supported Partner, Brendan Doherty Screeding Services supplied Südanit 280 Alpha Hemihydrate Screed and SMET LiteFlo® Lightweight Flowing Screed for the floor solution in this self-build in picturesque West Donegal.The ground floor was prepared with 280 Alpha Hemihydrate Screed at 50mm with UFH, maximising the clients’ insulation. The first floor was completed at 50 mm SMET LiteFlo® Lightweight Flowing Screed poured on UFH on timber joists.The 280 Alpha Hemihydrate Screed self-levelling liquid screed is remarkably quick to walk-on – applied at 500m² per day and walkable within 6 hours thus ensuring the follow-on trades were not delayed. it’s particularly suitable for use with UFH, fully encapsulating pipes and services, providing excellent heat transfer – and with thinner floors and more insulation – this increases the performance of underfloor heating.SMET LiteFlo® Lightweight Flowing Screed used on the first floor of the timber frame house is ideal where loading is an issue. SMET LiteFlo® Lightweight Flowing Screed is a high-quality, innovative, pumpable factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made LiteFlo® is unique, in that it’s the first pumpable lightweight flowing screed. Made from specially selected aggregates, makes it 30% lighter than conventional flowing screeds and therefore 70% lighter than traditional sand & cement – ultimately this means less is required per m2. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.TDS SMET LiteFlo® Lightweight Flowing ScreedAftercare SMET LiteFlo® Lightweight Flowing ScreedSMET Floor Screeds and Compounds Product SelectorHave a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

TDS SMET LiteFlo® Lightweight Flowing Screed Aftercare SMET LiteFlo® Lightweight Flowing ScreedEPD – LiteFlo® Lightweight Flowing ScreedWe supplied our Smet Supported partner, Floor Screed Ireland with SMET LiteFlo® Lightweight Flowing Screed for the Our Lady of Hope special school in Crumlin. The job was completed by Floor Screed Ireland on behalf of Vision Contracting for the Dept of Education. This lightweight screed is ideal for renovation projects where loading may be an issue. This is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is absolutely ideal for application in high-rise buildings, over timber-suspended floors, timber-frame houses, and in new builds and renovations.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Check out SMET lightweight screed, lightweight flooring systems, and aggregates (void fillers) suitable for any building project. We demonstrate best practice in construction partnerships - providing a superior level of customer service to our Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.

This was a major refurbishment and landscaping project for an office development in the City of London. A podium deck had been re-waterproofed and the area landscaped, by contractor Scotscape, with a mixture of hard surfaces, grass lawns, planters and borders. Wallbarn has a very wide range of pedestals for a variety of applications. So we were able to supply exactly the right pad to best support the 6 x 2” joists the landscaping contractor needed to hold their decking boards. The timber joists were fixed into a frame and rigid insulation placed into the cavities between the beams.

CREATING DEFINED ZONES IN OPEN PLAN OFFICE WITH MAXIBEAM AND SUPASLAT >> An office project in an outstanding building in a prime location overlooking London’s Oxford Street deserves a premium interior! This was achieved by the cleverly designed open-plan layout. The design includes a mix of social, collaborative, private and meeting spaces, each with its own distinct feel. Our Timber Slatted Ceilings System were chosen as the ideal solutions for the boardroom and large general meeting space.

Siberian Larch was supplied for this project in four different half lap profiles, utilising standard widths of timber to retain the value from the timber, and reduce waste – whilst the different widths board create an interesting image over the vast areas of timber cladding. NORclad Grade B was supplied, offering a fair spread of knots, along with the distinctive grain of the species which can be seen across the images.

The Castle Cove Sailing Club in Weymouth, Dorset, constructed a new terrace area to provide a viewing platform for the sailing events in the London 2012 Olympic and Paralympic Games.The sailing club required a waterproofing system that could be installed directly to the concrete construction in order for the works to be completed as quickly as possible. It was essential that the system was compatible with timber decking and would provide long-term protection from the elements.The sailing club contacted KG Roofing, their local Polyroof Approved Contractor, to provide a waterproofing solution that could meet the demands of the project. The BBA-Approved Protec System was specified for the works due to its rapid cure times and high waterproofing performance. Timber battens were incorporated into the system to create fixing platforms, creating a striking yet functional support for the timber decking and glass balustrade.With the Protect System affording rapid curing times, the terrace was finished within the desired time-frame, leaving ample time before the beginning of the Olympic Games. The lucky viewers at Castle Cove Sailing Club witnessed many record-breaking performances from Team GB’s sailing team, including Ben Ainslie becoming Britain’s greatest ever Olympic sailor.

Conservation Timber windows and doors - Spring Sash

Architect/Designer: Norman Foster/Foster + PartnersLocation: The Robert Parfett Building, ManchesterProject Overview: New single storey building arranged around a central spine incorporating a mezzanine level, kitchen and variety of meeting spaces. Scope included a complete ironmongery package for all new glazed and timber doors.ServiceFull hardware scheduling & Bespoke finish.Project DetailsHere at 3v we were honoured to provide the ironmongery for the new Maggie’s cancer centre in Manchester that was designed by one of Britain’s most respected architects, Norman Foster, and engineered by his team at Foster + Partners.The first Maggie’s Centre opened in Edinburgh in 1996, there are now 19 Centres at major NHS cancer hospitals across the UK. The Centres have been set up to offer a non-clinical environment where anyone affected by cancer can stop by for advice or support. The timber frame creates a striking angular structure with tapered wooden columns and beams, however the use of warm wood and glass create a soft light-filled environment for people to gather in. What ironmongery do you choose to work with such a beautiful building? With timber as the primary building material and Nordic Bronze roof cladding we turned to our bespoke range and specified solid bronze ironmongery to compliment the natural feel of the buildings material palette. The simple design of our 304 model pull handle works in perfect harmony with the clean angular structure and homely aesthetic; functional while perfectly blending into the final design. Our most popular raw material is high quality stainless steel but increasingly our clients have been asking for something a bit different or unique. Stainless steel would not have worked in this design scheme, matching the bronze cladding added the perfect finishing touches to the warm and tactile materials used in this amazing structure. If you are thinking about specialist finishes for one of your future projects please contact our experienced team so we can advise you in more detail. To find our more about Maggie’s Manchester and to read Norman Foster’s interview on the design of the new centre follow the below link https://www.maggiescentres.org/about-maggies/news-and-publications/latest-news/designing-maggies-manchester/Photographs © Nigel Young/Foster + Partners

High performance, timber sash windows from the Kensington & Chelsea range by Lomax + Wood have been designed, manufactured and installed in an historic commercial building in the City of London. Timber double glazed, period-style sash windows.Over 60 made-to-order wooden windows.Historic location in a conservation area steeped in history with many listed buildings. Designed, manufactured and installed by Lomax + Wood

Timber Sash windows, casements and doors were supplied for these prestigious properties in The Bishops Avenue, considered to be one of the wealthiest streets in London and the world. High performance timber sash windows and doors from Lomax + Wood Kensington & Chelsea Range 60 traditional timber double glazed box sash windows with cords and weights. 55 flush wooden-high performance casements windows 50 French doors, single doors and entrance doors all made-to-order in premium engineered timber Sustainable Timber from Certified Sources Supply and install service so there is only one point of contact PAS 24 Security Standard

Vtec's SupaSlat and Supaline panels were key design elements in this high specification, luxury residential development in London. The foyer area showcases BESPOKE TIMBER BATTEN WALLS and a unique FEATURE STAIRCASE, whilst the post room is crowned with an impressive SUPASLAT RAFT. Vtec were specified due to the intricate detailing, integrations, complex interfaces and technical nature of this residential project. We supported the designer, an industry-leading international architect and contractor, throughout the design stage and development process through to installation, overcoming some particularly challenging programme requirements.

Jesus Church had Selectaglaze secondary glazing installed by partner Fenestral, to raise the thermal efficiency of its thirteen lancet shaped stained glass windows in the north and south walls. The heating of the church is run on an antiquated oil-fired system which takes time to warm up the building. Once heated, a great deal of the energy was lost through the original windows. Special timber grounds were produced with enlarged gothic curved heads. By fitting the units nearer to the reveal, the primary windows are beautifully framed and the 13, Series 41 side hung casements have clearance to open.

In the substantial restoration of a large Georgian estate built for and inhabited by the aristocracy, high performance timber sash windows, French doorsets and entrance doors by Mumford & Wood have been used throughout the grand house and numerous outbuildings which span different periods. Conservation™ box sash windows with traditional cords, weights and pulleys, many with complex arched or curved top frames made by Mumford & Wood, are factory finished and double glazed. Of totally traditional design they benefit from modern manufacturing techniques, are highly energy efficient and fully compliant with Part L Building Regulations.