"tiles panels for suspended ceilings"

Based in Cheltenham, Collicutt Meats is the largest meat depot in the South West. After almost 30 years, the Elite FRP panels and fixings that were fitted are still looking and performing as good as new.

PROJECTmedi, Bayreuth [DE]COMPLETIONMarch 2023ARCHITECTSeiler Architektur GmbH / kadawittfeldarchitekturPRODUCTSTICELL in outdoor and indoor areas:White strip-painted aluminium; cell dimension: 54.55 x 54.55 mm; height: 40 mm, format 1200 x 600 mm; [1630 m²]STAR 3:White strip-painted aluminium; width of blade: 3 mm; height of blade: 20 mm; pitch: 20 mm [1700 m²]TANGENTA-H special version:Surface-mounted luminaire; light distribution: 2 x 35°; wide-angle; light colour: 3500 K; DALI dimmable [320 units]PUNTEO-Q50:Wide-angle downlight; light distribution: 2 x 55°; light colour: 3500 K; CRI >80; DALI-dimmable [40 units]PUNTEO-J85:Cardanic recessed downlight; light distribution: 2 x 30°; wide-angle; light colour: 3500 K; CRI >80; DALI-dimmable [6 units]With its new head office building in Bayreuth, medi GmbH & Co. KG , a manufacturer of medical aids, has created an open architecture concept that aims to promote dialogue between its employees. However, it is still possible to work centrally with additional break-out areas such as quiet workplaces.The ceiling and lighting solutions provided by durlum underline this architectural concept. The ’woven’ TICELL open-cell ceiling is used outdoors as well as indoors. In combination with the special version of the TANGENTA luminaire, this ceiling-lighting integration creates a unique look that gives the workspaces a modern, soothing lightness.In the washroom and toilet areas, the linear STAR 3 open-cell ceiling with its clearly defined edges sets architectural accents and creates a unique appearance.With this investment in its new building, medi has created a modern world of work, an impressive contribution towards the status of Bayreuth-East as a location for industry.

This was a large-scale wall and ceiling project in a 3-storey atrium of a major university reception. Vertical MaxiBeams were specified for the walling, including parts of the stairwell, because of its adaptability. It could accommodate the complex demands of the diverse elevations, with the additional technical challenge of spanning over the large windows. The vertical beams flowed down the inner faces of the atrium and wrapped under the soffit. The ceiling benefitted from our discreet Click-Fix installation method, which ensured beams could be removed individually, as required.

CREATING DEFINED ZONES IN OPEN PLAN OFFICE WITH MAXIBEAM AND SUPASLAT >> An office project in an outstanding building in a prime location overlooking London’s Oxford Street deserves a premium interior! This was achieved by the cleverly designed open-plan layout. The design includes a mix of social, collaborative, private and meeting spaces, each with its own distinct feel. Our Timber Slatted Ceilings System were chosen as the ideal solutions for the boardroom and large general meeting space.

Roof terrace on the third floor of a residential block. The customer wanted a floating deck but was keen to source decking that could be easily installed. They needed to deal with a slope and variation in the surface, as well as easy access to a drain. Wallbarn recommended their Cumuru hardwood timber tiles which being 500mm x 500mm x 30mm, which are highly portable and perfect for low threshold retro-fits. To deal with the variation in surfaces around the deck, we recommended laying the timber tiles onto our ‘Balance’ self-levelling pedestals. Total installation time: 3 hours

HAUSER is a traditional supplier of turnkey refrigeration systems, for example in the form of refrigerated shelves, counters and freezer cabinets. Besides its headquarters inLinz, Austria, the company also operates a plant in Budweis, Czech Republic. An office building was equipped with ceiling and floor systems from Lindner. In cooperation with the local partner Konstruktis Delta s. r. o., Lindner Plafotherm® DS 320 Type 1 metal ceilings with integrated heating and cooling functions were supplied. With regard to the floor systems, LIGNA and NORTEC raised floors were used.

Australia House’s design is striking. Its facade combines classical and Art Deco elements, making it a unique addition to London’s architectural landscape.With a thickness of just one millimetre the translucent stone element that gives the ceiling lamps at the Australian embassy in London their mesmerizing look is highly innovative material - Fini Curve Safe with Stone Laminate - glass-stone composite bent into the desired shape.For more information on the project please feel free to contact:FINIGLAS Veredelungs GmbHWierlings Hook 548249 DülmenTel.-Nr. +49-2594-78905-137Fax-Nr. +49-2594-78905-130Andre Seifert / Sales curved glassCell: +49-172-4560654Email: aseifert@finiglas.deHilal Aksit / Sales & MarketingTel: +49-2594-78905-128Email: haksit@finiglas.deWeb: www.finiglas.de

Eikon Design has successfully undertaken a major renovation of the Spirit AeroSystems main reception area, creating a stylish, energised space that integrates perfectly with the new corporate branding on its recently completed, world-class £28m Aerospace Innovation Centre.Spirit AeroSystems is one of the world’s largest manufacturers of Aerostructures for commercial airplanes, defence platforms, and business and regional jets. Eikon Design won the contract to design and project manage the reception area renovation.From the start, the designer felt that the refurbished reception area needed to reflect the dynamism and vitality projected by the Innovation Centre. The designers first thoughts were that they had to explore ways of using quality lighting and natural daylight on surfaces to create an impressive, engaging experience for visitors.The colour scheme - The designer Susan Anderson chose a neutral colour scheme that would reflect that used on the exterior of the Aerospace Innovation Centre, which was predominantly silver and grey. Surfaces – HARMONY pre-fixed slatted acoustic felt . Susan wanted to bring the reception area to life with surfaces that had different textures, depending on the light available and where the visitor stood in the room. After researching the market, Susan chose the Harmony ribbed-felt wall acoustic panels which Saxen sourced from the manufacturers, Soundtect. They were the perfect solution – grey fibre slats on a black acoustic sheet, as they had the structure, texture and colour she was looking for. Plus they were hypoallergenic and non-toxic, with up to 1.0 NRC (noise reduction co-efficient) – and a totally sustainable addition to the project, having been manufactured third-generation from recycled PET.The PET (polyethylene terephthalate) bottles are first recycled into exhibition carpets and then, at the end of their short second life, converted again into highly efficient acoustic felt by carefully re-layering the fibres to use as the core for this impressive, elegant, ribbed acoustic treatment.The Harmony panels are manufactured with fireproofing built-in, because the original carpet fibres were already fireproof so this critical safety component is integral to the product and not simply sprayed on. The Cause was responsible for fitting all the ribbed Harmony wall panels.The wooden wall panels behind the reception desk were dated, so the designer decided to repurpose them.- they were prepped, base coat applied and sprayed with two beautiful tones of metallic silver by Scottish Architectural Spray painters. Visual contrast was provided by prepped and coated matt white wall areas. LightingHaving found the perfect panelling, the designer had to consider the lighting and the role it would play. She worked with Seren Lighting, using a combination of existing products and bespoke lighting in ways which were both innovative and functional – using light to define spaces and surfaces. Depending on the way they were lit – whether artificial light, natural light or a mixture of both – the texture on the Harmony panels created subtly different moods. Also, as there is a fair amount of daylight flooding into the reception, the atmosphere of the whole space changed with the passing of time and the amount of daylight with both the ribbed and silver metallic panels creating different atmospheres depending on where you stood. All the lights installed in the project follow ‘circular economy’ principles and can be cost-effectively maintained and serviced – parts can be replaced with no need to throw the whole light away and buy a new one. The reception deskFor most of the day in summer and for short periods in winter, the reception area is flooded with natural light from two sides, so lighting the reception desk workstation needed a careful response.The workstation was located behind the reception desk, so using standard lighting methods would have detracted from the overall impression and been unnecessary for long periods. In developing the solution, the designer followed the basic principle, ‘put light where you want it, when you need it’. So an LED ultra-effect strip in diffuse profile was used under the top surface of the reception desk which threw a subtle light onto where the receptionist was working on the computer. The receptionist can switch this strip on or off as appropriate.The Cause remodelled and reformatted the reception desk to the design, which involved removing the angled elements and large posts, and replacing them with a concealed door. They also fitted the reception desk surface with a stylish, matt, dark-grey laminate, installing the lighting, graphic panel and ribbed panelling to the front. The panelling’s flexibility ensured a perfect fit around the curve in the reception desk.The reception desk skirting was painted the same colour as the staircase handrail.The Wing LightsThese were designed to develop the Wing Lights from first principle. The Wing Lights deliver light upwards, so it bounces off the various surfaces to enhance the textures and reflective differences. They also project a visual link to the ‘star’ element of the Spirit AeroSystems logo and took several attempts to create the final geometric shape. However, the Wing Lights now act as dramatic focal point within the space, capturing the essence of Spirit AeroSystems’ business and the designers overall design vision.CeilingThe existing suspended ceiling was off-white in colour, and looked rather tired so it was spray-painted with a dark metallic silver, which transformed the appearance of the ceiling and changed the whole look of the reception area. Lighting the upper-level walkwayThere were issues with uneven wall surfaces on the upper-level walkway. The solution was to apply architecturally inspired Harmony, lit by dramatic custom-made LEDs, to create the total effect – an utterly stunning, modern wall. The lights used were twin gimbal heads – round lights that can swivel in two directions. These were specially adapted from standard lights in the Seren range. The twin gimbal heads were installed in false pockets, clad with ribbed-felt. They provide functional lighting to the walkway, while adding a dramatic effect on the wall panelling.Finally, a pelmet was constructed to conceal a new LED Cob profile, allowing it to wash diffused light between the ribbed features of the Harmony panelling.The panels above the pelmet were spray-painted silver – the same colour as the ceiling – to give a much more dramatic effect.Other features…The wooden bannister handrail was stripped back and layered with different metallic colours to give a changing surface effect with different shadows and highlights. It was then coated in a high-gloss lacquer. This introduced an accent of colour, which also reflected the company’s corporate colours.StructuresDominating the reception area are two high columns, one of which contains a lift. Given the solidity and simplicity of the shapes, the designer decided on a lighting solution that would create an architectural feel, so she used beam-controlled light bars at the top of the structures to project a subtle wash down the full length of the columns.Carpets and furnitureThe existing carpet tiles were removed and upgraded. They were colour coordinated with the new, striking Italian Quadrifoglio furniture, sourced through Saxen. This furniture was the cornerstone of the designers vision vision, and its style, shape, colours and textures tie the space together.ConclusionThe success of the project was very much down to careful planning, creative thought and good people working together. Products used: Freestyle. Harmony

This high profile project in The Shard was a complete office fit-out, designed to future-proof and meet the end client’s operational needs. The modern design featured Vtec’s MaxiBeam system and Supacoustic panels. These systems allow for excellent visual appeal and acoustic performance combined with being easy to install and flexible to incorporate the specific access requirements.

SAS International delivered unrivalled metal ceiling solutions for a stunning refurbishment to The Atrium Building, Sandyford. SAS was selected for its unique SAS740i linear ceiling solution with integrated lighting. This ceiling design, characterised by floating rafts, influenced the entire atrium design. Specified in a contemporary grey, SAS740i rafts were suspended 20m below the glass atrium room through a stainless-steel cable system. Black SAS130 Mesh tiles were also installed to contribute to the industrial architecture. Completed in November 2018, SAS designed and delivered timeless metal ceiling solutions that will bring the building well into the next phase of its lifetime.

Manufactured with an extruded polystyrene foam core and a special coating on both sides, Jackoboard construction boards from Jackon by Bewi can be used as part of a system approach for tiling.With a range of shower trays and drain kits, Jackon says Jackoboard can help create a perfect wetroom or bathroom environment.Jackoboard construction systems provide the flexibility to meet modern requirements in bathroom design. “What was once considered a mere washroom has now been elevated to a private wellness oasis,” Jackon says. “In recent years, the demands placed on bathroom finishes have changed dramatically to allow refurbished bathrooms to shine like new with flexible and high-quality renovations.”The current British Standard for tiling, BS 5385-1:2018, requires the wider use of more appropriate materials for construction, and for receiving tiles in water sensitive and wet areas. This has reportedly increased the demand for the Jackoboard range in new build applications as well as in renovation works.The products are manufactured sustainably and, being superb insulators, they can be used in the design of energy-efficient homes, the company says. The protection of the environment is key to parent company Jackon by Bewi. The company says that plastics, when used as long-term construction materials can greatly reduce the need for heating energy and can therefore make a positive contribution to tackling the climate crisis. In fact, Jackon has been running a campaign in recent years to supply beehives made from the company’s polystyrene bead to the Bee Centre in Chorley. Like Jackoboard, the company says, these beehives will last a lifetime and provide better insulation than the alternatives, enabling the Bee Centre to continue its outreach work in support of honeybees and beekeeping.The surfaces of the Jackoboard system are said to provide an extremely strong bond for the tile adhesive and can be used on virtually any substrate. The boards are waterproof, thermally insulating, very lightweight and strong.The range can form the basis for a tiled finish, but it can also provide a substrate for wallpaper, paint or plaster. “So the possibilities for personal expression are virtually unlimited, allowing every bathroom to benefit from its own individual style,” Jackon says.Due to their core made of extruded polystyrene foam (XPS), Jackoboard construction boards and the wider product range are all lightweight and waterproof – a key benefit for bathroom new build and renovation.Jackoboard also makes installation “simple and easy”. The construction boards, bath panels and angle elements can be trimmed to the desired dimensions with standard tools, while their insulation values reportedly enable them to maximise the benefits of underfloor heating.The range is available in sizes and board thicknesses from 4-80mm to suit all building requirements. A suite of ancillary items are also available, from installation and sealing kits through to washers, fixing dowels and BoardFIX.J-Drain Linear and J-Drain Wall are recent additions to the family of wetroom products from Jackoboard. These products provide what the company calls a high-tech design solution to enable the creation of a totally minimalist walk-in shower.Both products are designed be used in combination with Jackoboard Sloping Boards for the floor and Plano Boards for the walls, to provide everything needed for a “highly fashionable and innovative walk-in shower solution”.“From a design point of view, these products are completely on-trend, given that the minimalist look for walk-in showers is very popular at the moment,” Jackon says. “Achieving this with a highly effective drain solution, which also showcases the tiling to maximum effect, is a key selling point for these new products, used together with Jackoboard backerboards.”

A Gloucestershire based independent care provider has recently completed a 46 bed extension on their care home for clients with dementia and nursing care requirements. Having worked with the contractor on a similar project, Astor Bannerman were recommended to the company to supply ceiling track hoists in an effort to future proof the needs of the home. With floor space at a premium, the company wanted to move away from the traditional style mobile hoists, which need to be stored away when not in use. Also, as using a ceiling hoist system normally only requires one carer to operate, this enables the company to adapt to the possible implications of Brexit on staffing levels.During the installation, we successfully added an XY (H-frame) hoist system into 3 assisted bathrooms and added 3m straight track OT200 hoists in 6 bedrooms allowing simple transfer in an out of bed.Fixings were also installed during the main build in the remaining 40 bedrooms, enabling the care provider to retrofit track and hoists as and when they require them at any point in the future.

There are a multitude of considerations for choosing the best commercial carpet tile solution.. Time spent looking at your criteria will provide a much better suited outcome.Listed below are the primary criteria Rawson Carpet Solutions recommends considering before selecting the best commercial carpet tile for your organization:

Richard Bowler wanted to tackle noise transference as part of his basement flat renovation in Autumn 2020. He turned to Oscar Acoustics to solve the issue cost-effectively, choosing Iso-Mount Type1 acoustic hangers to dramatically reduce noise from the house above with minimum ceiling height loss.Quality soundproofing is fundamental to the enjoyment of our homes. High levels of noise can affect our health as well as our sense of wellbeing. So, when Richard planned a complete revamp of his basement flat, part of his nineteenth century, four storey Devon property, he was determined to factor in sound insulation, while also creating a beautiful interior finish.Problem: Lack of sound insulation“Dating from 1850, the basement flat was of very poor construction and in need of complete renovation,” clarifies Richard. “In particular, with respect to the seven different ceilings of the flat and the ground floor of the house, there were undersized joists, making it uneven, bowed and springy. The wooden floorboards in the house had large gaps between them, and the ceiling of the flat was constructed with thin plasterboard. This meant no sound insulation at all - even a conversation could be fully overheard.”Solution: Soundproof ceiling with minimum ceiling height lossRichard wanted a fast, cost-effective, and easy to install solution to solve the noise problem. He discovered Iso-Mount Type1, an isolating acoustic ceiling hanger which significantly reduces transmission of noise from the floor above but only loses 6mm of ceiling height. Further with this choice, it’s possible to carry out all work from the room below."I selected Iso-Mount because it was simple and easy to install with extensive video instructions,” Richard says. “My builder, had never installed an acoustic ceiling, so it was important to find a solution he was confident with."“I did not fully appreciate at the time, but the use of Iso-Mount with an industry standard metal channel was a huge bonus and cost saver. We have saved a great deal of time and money using the adjustable Iso-Mounts to level the uneven joists.”Process: Simple installation of acoustics hangersRichard’s builder, Mark Lipton started the Iso-Mount Type1 installation in one of the smallest rooms of the flat. Within two days, he was confident using the height-adjustable acoustic hanger.Marks says, “Initially I was unsure about the system as I had not used it before. I started with the bedroom as it seemed the easiest to install. Once that was done it was easy to fit the other ceilings. The living room was the largest room and the most uneven in terms of joists. The ceiling went up in no time.”“One of the nice features of the system is that it is easy to create a false ceiling to run services. It was also useful in complex areas where, for example, we had a concrete lintel to accommodate. The fiddliest part of the whole install is fitting the rubber isolators to the mounts. On the other hand, achieving perfectly level ceilings was very easy.”“We used belt and braces which included the Iso-Mounts, the acoustic tape, the sealant, foam filler, acoustic insulation, and two layers of SoundBloc plasterboard,” says Richard. “The SoundBloc was the most challenging install since it was much heavier than ordinary plasterboard and my builder had to work hard to install it. From my perspective it is only marginally more expensive and worth it for the extra isolation.”   Result: A ‘superb’ soundproof ceiling systemWith installation completed in ten days, Richard was delighted with the ceiling.  “For acoustic isolation, the Iso-Mount system is superb. It even created a perfectly flat ceiling despite the uneven joists above. Noise transfer between house and flat is far, far reduced. When experiencing noise transfer now it is normally through an open door or window rather than transmitting through the floor/ceiling." “We had no woodworking or fillers to add or level off. We simply used the adjustable Iso-Mount for reduced noise transfer. The Iso-Mount system is a brilliant way to isolate between floors and I couldn't be happier with the results. The ceiling is superb and flat as a pancake despite the uneven joists above. I highly recommend it."Ben Hancock, Managing Director of Oscar Acoustics, says: ‘Unwanted noise can negatively impact on our lives at home, and affect our health. With over 43 years of acoustics and soundproofing experience, we developed the Iso-Mount system to manage and reduce sound transfer reduction between floors, to help restore the peace and create a tranquil home environment.”

PROJECTSecondary school in Grüze 5, Dübendorf [CH]COMPLETIONOctober 2023ARCHITECTStutz Bolt Partner Architekten AGPRODUCTSTANGENTA Y100 luminaireLight distribution: 2 x 60°; light colour: 4000 K; DALI dimmable; CRI > 80; LED: 3 x 34.5 W; dimensions [L x W x H]: 1,550 x 100 x 100 mm [72 units].S7 RHOMBOS TAIFUN expanded metal ceiling system1.5 mm thickness of black sheet; mesh size: 44 x 12 x 3 x 1.5 mm; dimensions: 980 x 790 mm and 1,650 x 680 mm; powder-coated in RAL 9016 matt [576 units] The new extension to the school building at Dübendorf-Schwerzenbach blends seamlessly into the existing complex and, with a lightness of design touch and its versatile range of usage options, it takes a big step towards modern school infrastructure. This building has been designed to enable it to be adapted to suit changing requirements in future. The school building is constructed on a double gym facility, two thirds of which are recessed below ground level, receiving natural daylight through a strip of windows at the top of its walls. When needed, the TANGENTA-Y100 luminaires supplied by durlum can be switched on. These deliver high lighting intensity combined with superlative lighting efficiency. These luminaires are discretely integrated in the S7 RHOMBOS TAIFUN expanded metal ceiling system with tested ball impact resistance to fulfil the special requirements of sports hall. Combined with its small mesh size, the white, powder-coated ceiling imbues an aesthetic appeal to this hall, which is also used by the general public. All entirely in sympathy with the architectural vision.

Rockfon Mono Acoustic's tile/filler/render system was used to control reverberation in a large open plan office.

1,300m2 of Schlüter-DITRA 25 uncoupling membrane ensured a crack-free finish for the tile within 2016 Turner Prize nominee Anthea Hamilton’s 2018 commission for the prestigious Duveen Galleries. One British artist a year is invited to produce a new work for the signature space, which constitutes the heart of one of the UK’s most famous art galleries. Hamilton’s response, entitled ‘The Squash’, combined performance and sculpture in an immersive experience.

Described as a milestone project for the sector, the newly built library at Birmingham University has completed its contemporary appearance with burmatex®, Green Guide A+/A, carpet tiles. Using five different ranges the design is adjusted throughout the building in order to suit the various spaces

Queen’s University is a member of the Russell Group, and one of the United Kingdom and Ireland’s leading universities which continues to shape and serve the world through research and teaching. Based in the heart of Belfast, Queen’s University is committed to enhancing its historic campus and the surrounding conservation area while providing 21st century facilities for education and research.With the entrance atrium combining various double and triple-height spaces over different floors, Armstrong METAL Cellio was the perfect choice to provide a sleek contemporary ceiling that connected and unified these spaces into one recognisable volume, with a sense of lightness and transparency.HERADESIGN® was used throughout the building as a recognisable and repeated element that provided good acoustic performance with texture and pattern. From a wall and ceiling installation highlighting the reception area, to acoustic absorption on the walls in meeting rooms and subtle black hanging baffles in a bar space.

In summer 2019, Bradford Hospital had opened their newly built Wolfson Centre for Applied Health Research. As a part of the new building burmatex® osaka carpet tiles were fitted to complete the interior design of the Centre. osaka inkpot is the main carrier, ideal for having on-site cut triangles of osaka sakura and osaka matcha with random colour effect creating zones on the floor. In this office environment, burmatex® heavy commercial class 33 carpet tiles have been chosen to create a unique and eye-catching effect in keeping a high level of performance.

Our client on this project specialise in vehicle conversions for all emergency services and government departments. They needed a reliable, reputable flooring company to assist them with their refurbishment.   The project requirements were:Surface area to cover 410m2 Must be able to handle vehiclesFire retardant - Bfl S1Fast installationImpact resistantNo adhesive or damp-proof membrane requiredColour optionsHardwearingReduce dust and noiseEasy to clean and maintainCE accredited R-Tile Textured Dovetail by R-Tek Manufacturing was the clear choice, we supplied and fitted a durable, hardwearing flooring suitable for their needs and requirements.(R-Tile Textured Blue -with some black tiles for a walkway had been selected by the client).

Rawson’s Spikemaster stud resistant flooring has been used to good effect at Ascot, offering durable carpet tiles with great walking comfort and durability.

VitrA's Red Dot award-winning streak continues with three exceptional designs, including the Liquid bathroom collection by Tom Dixon, Resincrete, and ModePaper tiles.

Our black anodised Premium CMS stair nosings can be found in the entrance lobby at Queen Street Place, London EC4. Installed by Harper and Edwards, these elegant black anodised stair edgings create an excellent surface contrast to the grey porcelain tiles and natural wood features.

Marking a £10.6m investment, a Hampshire County Council (HCC) designed school in Wellesley, Aldershot provides an excellent start to a child’s learning. Knauf Ceiling Solutions' HERADESIGN® Superfine contributes to this vision by helping to create a healthy acoustic environment. HERADESIGN® is manufactured from sustainably sourced wood wool with a unique, organic aesthetic that can match any colour as ceilings, baffles, canopies and wall absorbers. Thanks to the technologically-advanced mineral wool core, HERADESIGN® demonstrates exceptional sound absorption which makes it suitable for a variety of environments, from schools and leisure buildings through to offices and hospitals.

Located along a winding mountain road in Queenstown, New Zealand, the Kingspan panels installed on this project have provided state of the art facilities for skiers at The Remarkables skifield base. The new addition to the centre is comprised of a three level base building that is home to numerous activities, including gear rental, a snow sport school and a restaurant.Due to the local climate and surroundings, the panels installed needed to be resilient to adverse weather conditions. Trapezoidal Wall panels deliver excellent thermal efficiency, providing the correct level of thermal and structural performance required in this extreme environment.

Working on 100m2 per night, the entire floor of natural stone tiles had to be refurbished whilst the airport remained fully operational. The solution was a high strength ARDEX Ultra Rapid Drying Screed Cement in combination with ARDEX MICROTEC Natural Stone Adhesive, and Rapid Drying Tile Grout.

8,000m2 of limestone tiling was fixed using ARDEX X 7001 W Tile Adhesive with Rapidry Formula  Technology. The luxury tiles were grouted in just two hours, providing the perfect finish to the £675m modernisation of the shopping centre.

Vtec’s MaxiBeam system was included in the design for a new reception area in a corporate office building. Both the client and designer wanted a statement feature that had a real ‘wow factor’ that also worked alongside the rest of the scheme. The design involved complex geometry and integrations for a stunning acoustic wall and ceiling in MaxiBeam Light Oak finish. The project involved bespoke angled ends on the interface, precise spacing and complete integration with the lighting scheme. In addition, timescales were extremely tight so drawings with full install details and 3D visuals were turned around very quickly.

Paradise Street student village, Coventry, provides 893 quality homes and 1,400sqm of social space including common rooms, café/bar, cinema and gym.Our HERADESIGN® ceilings have been fitted in the acoustically-demanding areas to help create an environment that’s conducive for both study and relaxation.HERADESIGN® was the first choice for FBM Architects as they had used it in another recent student accommodation project in Coventry and valued its aesthetic properties, acoustic credentials and durability. “We chose HERADESIGN® because of its textured effect that would provide a tactile quality and soften the space, both acoustically and visually.”

Architecture and design practice KSS Associate, Trevor Gidlow commented, “We were commissioned by interior fit-out specialists, Portview, to review various ceiling systems for application within Coal Drops Yard. Five were reviewed including monolithic and stretched fabric systems. Our assessment criteria included - appearance, sustainability, acoustic class, fire resistance, combustibility, weight, installation angle and curved edge profiles. Rockfon® Mono® Acoustic was our final recommendation and main contractor selection based on the ability to install as a multi-gang operation, thereby gaining significant programme benefits. The appearance of the installation fully achieved the original design vision”.

ROCKFON has successfully worked together with Global Contract Interiors, Kier Construction and Architects Seymour Harris, to establish a fully compliant range of acoustic solutions that meet the required performance specifications at the new Phoenix Academy in Telford; built as part of the council’s Building Schools for the Future programme. Around 2,000m² of ROCKFON products: Rockfon Scholar and Samson wall panels; Rockfon Contour suspended baffles; and Rockfon Alaska suspended raft islands, were installed throughout the school to improve acoustic sound absorption – particularly in areas where the school design meant that traditional suspended ceilings were unable to be installed.

Installing an access panel or a loft hatch is something which is very important when you’re looking to be able to do more with the space you already have within your home. However, there are certain building regulations you should be aware of when it comes to installing a panel or a hatch, as you need to comply with them. In order to make sure that you definitely understand these regulations, we’re taking a closer look at them here.

Architect: Page \ ParkInstaller: McLaughlin & HarveyProduct: ‘Shiluvit’ by Oranit400m2 of Shuluvit panels in 7-501 formation and Natural Yellow Pine were installed to the ceilings of the entrance way and cafe area of Kelvin Hall in Glasgow as well as 170m2 of linear acoustic planks in Natural Oak veneer to the main lecture theatre.The facility on historic Argyle street to the west of Glasgow city centre is a thriving community hub. Home to event and lecture space for the public as well as the University of Glasgow and local businesses. Kelvin Hall also houses the Glasgow Museums and the National Library of Scotland, celebrating the country’s history in historic and present literature and manuscripts as well as maps, films, and digital media.In addition to the educational spaces Kelvin Hall also has fitness suites for both adult and child classes as well as a 100 piece gym and multiple sports hall for public and commercial use. New to the facility in 2019 is the public climbing wall activity centre and soft-play for younger community members!The newly refurbished Kelvin Hall is home to parts of the National Library of Scotland, Glasgow Museums, and University of Glasgow research exhibitions as well as the Glasgow Club hosting fitness classes and children’s gymnastics clubs.

Project: Manufacture and installation of external GAP cladding panels using hidden fixings and chemical anchoring. Client: Stuart Forbes Associates Materials used: Bespoke size external GRC cladding panels in Rough Mist finish, treated with hydrophobic agent and clear sealant. This exciting new refurbishment project of a private house in Wimbledon, London brought with it plenty of manufacturing and installation challenges! The designers’ vision called for 2m x 1.2m large format GAP panels with mitred edges to be seamlessly wrapped around the building. The panels had to be millimetre perfect to avoid any cutting on site.

Rawson’s Jazz Solution Dyed Nylon carpet tiles are most suited to education environments and These education carpet tiles are durable and provide choice with 24 colourways.