"tec ties"

C-TEC’s revolutionary new evacuation alert system, EVAC-ALERT, has been specified for a new purpose-built residential building in London.Located in the Elephant and Castle area of the London Borough of Southwark, Joyce Newman House is an 8-storey block of 40 spacious living spaces commissioned by Leathermarket JMB, Southwark’s largest resident-managed housing organisation. The affordable-housing development also features landscaped gardens, an interactive playground and a communal kitchen garden for residents to grow their own vegetables.Specified and supplied by Churches Fire & Security working alongside Blu Electrical Installations Ltd, C-TEC’s EVAC-ALERT has been designed to comply with the new BS 8629, which recommends evacuation alert systems be installed in all new blocks of flats over 18 metres to assist the Fire and Rescue Service (FRS) in evacuating part or all of a building in an emergency.The system consists of a 2-loop control panel connected to a host of single and multi-way interface units, self-testing sounders and visual indicators. Simple and intuitive with manual controls to allow firefighters to easily operate the evacuation alert devices located inside flats on a zone by zone or floor by floor basis, the panel is stored in a secure vandal resistant cabinet which can only be accessed by the FRS using a special copy-protected key.David Collins, Project Manager at Churches Fire & Security, said: “Evacuation alert systems ensure firefighters can alert occupants in a building of the need to evacuate if a fire gets out of control. The EVAC-ALERT system we’ve specified provides peace of mind for residents and, crucially, also demonstrates that building management have taken every precaution possible to protect the people residing in the property. Our client is delighted with the system.”Certified to all relevant EN54 product standards, EVAC-ALERT is powered by C-TEC’s CAST protocol and fully compatible with ENVISION, its powerful new cloud-based remote access data management software which can be used to provide duty holders with a verifiable audit trail of system activity and device testing.

EVAC-ALERT, C-TEC’s powerful BS 8629 compliant evacuation alert system is protecting seven high-rise residential tower blocks in the heart of London. Guinness Square in Southwark and the Houses of Aubin, Clemoes, Maitland, Sherratt, Southgate and Sweeting in Brixton’s Loughborough Park are all managed by The Guinness Partnership, a 130-year-old charitable organisation that prides itself on providing high quality homes to improve people’s lives. The upgrading of the life safety systems was deemed vital to ensure the protection of residents living in the properties.Orestone Controls, the BAFE SP203 and SP207-accredited specialist systems integrator, was tasked with equipping the blocks with fully BS 8629 compliant evacuation alert systems to assist the Fire and Rescue Service (FRS) in evacuating part, or all, of a building in an emergency.  Ryan Mullen, Orestone’s CCO said: “Demand for evacuation systems is at an all-time high due to a combination of improved fire safety standards and new legislation. We’ve particularly noticed an increase in enquiries and orders since the new Part B of the Building Regs came in last year, as this says they must be installed in all new high-rise residential buildings over 18m in England. The new HSE ‘Be Ready’ campaign will also no doubt trigger new contracts with local councils and private companies over the next six months.”Ryan said: “We chose to specialise in EVAC-ALERT primarily for the ‘handholding’ service C-TEC provides, namely the first-class technical support that is so important on life-safety system projects. From the very first demonstration of EVAC-ALERT at our offices, to where we are today, C-TEC has supported us and our relationship has gone from strength to strength. We are experts at installation, highly conversant with the standards and because of this we have had to expand our fire division again with additional dedicated engineers to deal with growing demand. We have also started to work for other Housing Associations including GreenSquare Accord on some of their high-rise buildings.”As BS 8629 is a relatively new standard, C-TEC is very keen to ensure to educate people about its requirements. Throughout a project, the company is there to make life easier for the client, be that the consultant, the installer, the owner or building management company and they can assist with plans, technical drawings and the loop calculations required.By using the unique evacuation alert system software created by C-TEC’s R&D team and undertaking an assessment of a building, Orestone calculated exactly which devices are required. Special requirements for, say, elderly, vulnerable and disabled residents, were also taken into consideration. For example, visual indicators, vibrating pillow pads, etc. C-TEC also provided free advice and training on commissioning, cause and effects.  Ryan said: “Our engineers are constantly expressing how simple and intuitive EVAC ALERT is to install. The wiring is very straightforward and the flat interface units give you confidence that any short circuits will be isolated protecting the integrity of the loops. There’s no doubt that the system’s simplicity has allowed us to achieve minimal disruption to residents and work around their busy lives as we can be in and out of each flat in under an hour.  “Customer satisfaction is very important to Orestone and we consistently score five out of five on reviews. We take time to engage with residents and explain how the systems we are installing are designed to protect them. At Guinness Square we even held a joint open day with The Guinness Partnership to showcase the technology to residents, which the London Fire Brigade also attended and which was very successful.”The systems in each high-rise typically consist of 2-loop control panels connected to a host of single and multi-way interface units, self-testing sounders and visual indicators. Simple and intuitive, with manual controls to allow firefighters to easily operate the evacuation alert devices located inside flats on a floor-by-floor basis, the panel is stored in a secure vandal resistant cabinet which can only be accessed by the FRS using a special copy-protected key.Peace of mind that there is a Plan B if everything else goes wrong is crucial in the current climate, not just for owners and residents, but also for the fire service. By installing an evacuation alert system, building management can be confident that every precaution possible has been taken to protect the people residing in the property.EVAC-ALERT is powered by C-TEC’s CAST protocol and is fully compatible with ENVISION, its powerful new Cloud-based fire alarm remote access, service and site management software package which can be used to provide duty holders with a verifiable audit trail of system activity and device testing. 

EVAC-ALERT, C-TEC’s new evacuation alert system, is now in operation at Delaney Heights, a radically renovated tower block in Salford.With 119 affordable rent apartments featuring floor to ceiling windows and stunning city views, the building cost over £9M to refurbish and is named after Shelagh Delaney, Salford’s famous playwright and the author of ‘A Taste of Honey’.The EVAC-ALERT system installed there comprises a powerful 3-loop panel connected to single and multi-way flat interface units, self-testing sounders and Equality Act-compliant visual indicators and vibrating pillow pads, all designed to fully comply with BS 8629, the code of practice for evacuation alert systems.Darren Moulding, Director at Supersafe, the BAFE SP207-registered specialist fire company that completed the project for The Guinness Partnership, said: “Optimum fire safety protection and the correct evacuation procedures are critical in residential buildings to protect people and property.“Currently there’s a huge demand for evacuation alert systems as Part B of Building Regs states they must be installed in all new residential buildings over 18 metres high. “EVAC-ALERT’s flexibility means it’s very easy to customise to create a cost-effective BS 8629-compliant solution for any high-rise to give owners and residents peace of mind.“We particularly liked the fact we could test every single sounder independently from the panel and that the entire system was powered up and running perfectly from the word go. Our client was very impressed during handover and, as a company, we would highly recommend EVAC-ALERT.”Joanne Stokes, Building Safety Resident Liaison Officer at The Guinness Partnership said: “Myself and Robert Murphy, our Clerk of Works were more than happy with the installation of the evacuation alert system. Supersafe’s customer service skills are second-to-none and communication with myself and our customers was first-class and kept the project firmly on track. I look forward to working with the Supersafe team on future projects.”EVAC-ALERT is powered by C-TEC’s CAST protocol and fully compatible with ENVISION, its powerful new cloud-based remote access data management software which can be used to provide duty holders with a verifiable audit trail of system activity and device testing.

American software giant Adobe has opted for C-TEC’s innovative SigTEL disabled refuge system at its impressive UK Headquarters in Maidenhead, Surrey.With its powerful controllers and extensive arrangement of fire telephone and disabled refuge outstations, the system is central to protecting the state-of-the-art UK offices of one of the world’s most successful software and technology-based companies. However, according to David King, Installation Manager at Niscayah Group, the company that completed the project at Market House, the installation was far from straightforward as the building already had a SigTEL disabled refuge system installed on one floor which needed to be connected to new equipment so to create one large system for the entire four-storey building.Said David: “The challenge was to interface an additional Master Controller and various outstations to the equipment already in operation. To achieve this we temporarily suspended the system and used C-TEC’s new EVC423 software to completely reprogram it once the new Controller and outstations had been installed.”Although specifically designed for the programming of larger SigTEL systems, C-TEC’s new EVC423 is also excellent for programming smaller disabled refuge/emergency voice evacuation systems.Said David: “The software proved to be a lifesaver on this particular project as it enabled us to program the entire system from scratch very quickly reducing system downtime. The fact that you can edit outstation/extension names using a PC makes programming so much quicker and easier”As a result, Market House now has a fully operational disabled refuge/emergency voice evacuation system. In an emergency situation, the system will enable clear two-way communication between building management and people located in the refuge areas to, firstly, assist rescue teams in finding people and, secondly, to let stranded people know that help is on the way.Based in London, Niscayah Group is a subsidiary of Swedish-headquartered Niscayah AB (formerly known as Securitas Systems AB). Specialising as an integrator, the company offers complete fire and security solutions for customers with high demands for security and efficient solutions.

Hush Pro, C-TEC’s revolutionary BS 5839-6 Grade C domestic fire detection and alarm system, is now protecting three iconic tower block developments in Manchester.Located in the centre of Piccadilly, Oxygen Towers is a striking set of three new 31-storey, 16-storey and 10-storey buildings consisting of 345 stylish 1, 2 and 3-bedroomed apartments and 12 spacious family townhouses. Designed to provide the ultimate living experience, the futuristic ‘vertical village’ combines luxury accommodation with fabulous five-star leisure facilities including a swimming pool, cinema, gym and spa. The stunning development also features lush garden terraces and rooftop gardens.Selected for its cutting-edge technology and capacity to align with the building’s fire strategy, Hush Pro integrates with the site’s BS 5839 part 1 landlord system to offer higher levels of fire protection than the Grade D unmonitored battery alarm systems typically used in domestic installations. As a fully-monitored BS 5839-6 Grade C system, Hush Pro reports open and short circuit faults and operation faults back to the fire panel and even allows management and maintenance companies to remotely monitor the system. Each of the flats features an easily accessible low-level Hush Pro Controller connected to a series of Hush Pro smoke detectors, base sounders, multi-sensors and heat detectors all seamlessly interfaced to a powerful network of C-TEC 4-loop ZFP addressable fire control panels to provide all-encompassing fire and fault monitoring of the system. If, for any reason, part of the domestic fire alarm is compromised, this will immediately be reported to the building management team to allow them to action the fault and re-instate full fire detection coverage to the flat.Said Dan Perry, Projects Manager at Solid State, the specialist fire and security company involved with the design and delivery of the project: “As well as enhancing the fire safety management, property and life protection of the buildings, a key factor in our client’s decision to invest in Hush Pro was the system’s ability to notify building management in the event of a real fire and, at the same time, its potential to virtually eliminate false alarms.”“Hush Pro’s unique capacity to differentiate between Fire Level 1, usually a false alarm reported locally in the dwelling, and Fire Level 2, almost always a real alarm activated outside of the dwelling, reduces false fire alarms, unnecessary call-outs and the risk of a real fire alarm being ignored. As our client requires immediate notification in the event of a fire but also first-class false alarm management, Hush Pro is ideal.”“Also of vital importance to our client is that, as the project consists of private balconies with an open plan flat arrangement, Hush Pro is the only fire alarm solution that can actually meet the requirements of BS 9991 Annex D3.”Said Jason Lawler, 24-7’s Group Director and the person responsible for delivering the electrical and mechanical systems for the project: “Hush Pro is an outstanding solution. The system provides residents with easy-to-use detection, alarm, silencing and test facilities so they can test their own devices, be alerted to system faults and hush any false alarms at the Hush Button which is positioned at light-switch level for safe and easy access. Hush Pro’s powerful false alarm management capability will also prove invaluable at the site.”Said Dan: “Client satisfaction is incredibly important to Solid State so we were delighted to be able to specify a robust and fully-compliant integrated BS 5839 Part 1 and Part 6 fire alarm solution for Oxygen Towers. With its capacity to provide high levels of fire protection yet also minimise costly and disruptive false alarms, Hush Pro is fast becoming the system of choice for fire strategy engineers and consultants dedicated to enhancing fire safety in high-rise residential and specialist housing projects throughout the UK.”

CT1 is Creating Waves in BristolProject Case Study: The Wave, BristolCustomer: Andrew Scott LtdArchitect: APG Architecture CT1, officially voted by an independent survey, as the UK’s Number 1 Sealant and Adhesive is a world leading brand that’s made right here in Britain.CT1 is used by construction professionals in every sector of the industry including roofing contractors, joiners, window suppliers, kitchen fitters, bathroom installers, as well as specialist fit out and building companies working on every possible scale of project from small one of extensions to massive high rise, multi-purpose developments across the country.CT1 replaces several different sealants and adhesives in one tube. It’s the ultimate snag list eliminator providing permanent sealing and bonding solutions, saving time and money by delivering outstanding performance on almost every type of building material in virtually every application.CT1 - The Specialists' Choice of Sealant and Adhesive!When building the groundbreaking Wavegarden Cove project in Bristol, engineering specialists Andrew Scott Ltd needed extremely high preforming, highly deformable and very durable adhesives and sealants guaranteed to endure rigorous and testing conditions in consistently wet conditions, including permanently underwater.The Wave in Bristol is the brainchild of founders Nick Hounsfield and Craig Stoddart, who wanted to create a positive, healthy, well-being destination for people.Designed by APG Architecture, The Wave is a 180m inland surf lake generating up 1000 waves per hour ranging from 50cm in height up to 2m high crashing bodies if water, delivering unrivalled inland surfing experiences suitable for every level from beginners to the seasoned professionals.Finding Sealant & Adhesive Solutions for Challenging Build EnvironmentsWith the originally specified adhesives failing to meet the tough requirements of this complex build, Project Manager Steven Hunt turned to CT1. This was driven by the need for products guaranteed to stand the test of time in harsh, wet conditions, including constantly moving, floating platforms. CT1 delivered superior adhesive and sealant performances while also meeting the client’s environmental and sustainable build values. CT1’s Unique ‘Tribrid®’ TechnologyWith unique ‘Tribrid®’ technology CT1 sealant and adhesive is now 3 times stronger, with 350% elongation, secured colour retention and enhanced performance even in the harshest outdoor applications.Furthermore, CT1 is the high strength, solvent free, environmentally compliant and most ecologically advanced sealant and adhesive available that’s used by construction professionals in every sector of the industry.  CT1 was put through every possible assessment for adhesion, flexibility and strength, exceeding every expectation and providing the architects, specifiers, engineers and clients with assurances and confidence in the success of their project.CT1 not only delivered during the build phase but it continues to deliver while being tested every day by the harsh environment exacerbated by the strength of moving bodies of water and thousands of users. Such has been the unrivalled success and performance of CT1 it has already been specified on Nick and Craig’s next wave project in Scotland. CT1 is Made in BritainCT1 is made in Britain with British technology and British design. Officially voted the UK’s Number 1 Sealant and Adhesive by trades people nationwide, CT1 comprises the very best raw materials and is leading the way in quality, service and technological advancements being made in the construction industry.CT1’s ‘Tribrid®’ technology provides unique adhesion on virtually any material in most applications without the need for additional fixings. Available in ten different colour options it offers specifiers and construction industry experts greater versatility for use in so many more applications.Why Use CT1?Whether you’re an architect, surveyor, specifier, builder, plumber, joiner, roofer, landscaper or DIY enthusiast, CT1 is the sealant and adhesive of choice for every project, packed in every toolbox and immediately on hand to provide the best solution every time.Here’s just 10 of the reasons why:Will bond on virtually every type of construction material in most applications including wood, metal, glass, fiberglass, stone, concrete and most plastics.Incredibly tensile strength of up to 2.9 N/mm2 when fully cured.Environmentally friendly with no detrimental impact on ecological biodiversity.Unique flexibility with excellent resistance to vibration and up to 350% elongation.Works in wet and dry conditions – ideal for marine and boat maintenance.Ultra-violet Resistant.Solvent Free and suitable for clinical and clean room environments.Excellent resistance to chemicals.Will not shrink, dry out or flake.Can be painted.CT1 is available now in all good builders’ merchants nationwide and online from www.ct1.comCT1 – Often Copied but Never Equalled!We Innovate – Not Imitate!Image Credits: The Wave, Bristol

Customer: Mark Greensill, Rugeley, West Midlands, England Background to the IssueMark Greensill from Rugeley in the West Midlands had a major issue of weed ingress in his garden pond. The garden feature was created 15 years ago and after fitting a brand-new pond liner just last year the very aggressive weed Mare’s Tail (also commonly known as horseweed) had broken through a seal and was growing rapidly in the pond. The creeping stems of this highly destructive plant may go down deep below the surface, making them hard to remove by digging out. CT1 Provides and Environmentally Compliant SolutionMark needed a long-term solution to repair the liner without replacing it, whilst being environmentally friendly to ensure no detrimental chemical impacts on the pond life and ecological biodiversity of the surrounding areas. Containing neither solvents nor highly reactive isocyanates CT1 is environmentally compliant and perfect for all pond and water feature maintenance as it will not affect any aquatic plants. Why Choose CT1?Having seen CT1 in his local hardware store and previously watched videos of internet sensations The Bald Builders sticking a skip to the ceiling and driving a Ferrari under it, Mark was sure it would provide the answers to his problem without having to drain all 900,000 litres of water out of the pond.For ease of access to remove the Mare’s Tail he pumped out approx. 250,000 litres of water. This made identifying where the harmful, spreading weed had damaged the pond liner very easy.As the CT1 is a highly deformable, polymer enriched sealant and adhesive with 350% more elongation it can be used in wet and damp conditions where increased flexibility, resistance to environmental changes and UV light are important.The Application of CT1Mark cleaned any silt and filamentous algae off the effected areas to ensure full contact of CT1 on the pond liner repair.This created a perfect seal that would prevent further ingress of damaging weeds while simultaneously preventing water seeping out of the pond. Another Successful Result Provided by CT1!The repair of the pond liner is a complete success, and the garden feature has been restored for the family to enjoy and local wildlife to benefit from. Mark said;“I’m absolutely delighted with the result. I thought I was going to have to remove and replace the while pond liner. It would have been so much work. CT1 provided such a great solution; cost effective, time saving and environmentally safe for the pondlife and local habitat.”Once again CT1, which comprises of the very best raw materials, has demonstrated why it’s the number 1 sealant and adhesive available. CT1 is always leading the way in quality, service and advancements being made in the construction industry.

Building an outdoor garden and entertaining space with a fab kitchen area that’s the envy of all your friends and neighbours is something many of us only dream about. The new series of Love Your GardenIn the new series of Love Your Garden with Alan Titchmarsh, landscaping experts Cotswold Garden Renovation Services LTD built a beautiful stone columned kitchen with a porcelain slab countertop using Power Grab ‘n’ Bond to secure everything in position for a long-lasting finish, guaranteed to last for a lifetime. Harry & Jamie only use the best materialsHarry Barnes & Jamie Johnstone of Cotswold Garden Renovation are leading the great garden revolution. They’ve shown that with passion and skills anything is possible and provide landscaping expertise for ITV’s Love Your Garden alongside garden designers Alan Titchmarch, Francis Tophill, David Domoney, Katie Rushworth and Danny Clarke.They believe in always using the best quality tools, materials and trusted brands. Power Grab ‘n’ Bond is developed by leading British manufacturers CT1, the No1 sealant and adhesive in the UK. CT1 is always leading and providing the industry with the very latest technology. Now thanks to its unique ‘Tribrid®’ technology Power Grab ‘n’ Bond is a revolutionary product in the field of heavy-duty versatile bonding. Building a outdoor kitchen using Power Grab ‘n’ BondIn their latest project Harry and Jamie hand built a series of vertical stone columns that were then braced together with wide metal strips. Usually these would have to be fitted using mechanical fixings, requiring holes to be drilled through the stone and heavy bolts fitted with their thick heads protruding above the metal braces. As 20mm porcelain slabs were being fitted on top, these protruding bolts were going to be a major issue. Power Grab ‘n’ Bond provided the perfect solution as it’s the ultimate grab adhesive, eliminating the use of mechanical fixings completely and coupled with the rapid curing will, in most projects, save 50% labour time and cost.Using a heavy-duty caulking gun, Harry and Jamie applied Power Grab ‘n’ Bond straight from the cartridge, onto the metal braces and after 4-5minutes fixed directly them into place. Why use Power Grab ‘n’ Bond?With phenomenal initial grab, this fast curing, non-shrinking and almost odourless adhesive secured the braces firmly with immediate effect.Three times stronger than regular hybrid polymers, the ‘Tribrid®’ technology in Power Grab n Bond ensures longer colour retention, incredible durability and flexibility, even when applied outdoors.Yet Power Grab ‘n’ Bond will remain flexible and resist vibrations caused by cooking equipment, barbecuing and constant use. It won’t dry out, nor become brittle and works perfectly in temperatures ranging from 90°C right down to the mind numbing cold -40°C. Power Grab ‘n’ Bond will successfully stick to any material in most applications Not only does it successfully stick all metals (including alloys), but Power Grab also ‘n’ Bond has a capacity to adhere to a wide range of materials such as stone, granite, ytong, marble, concrete, wood, MDF, fiberglass, glass, polystyrene, mirrors and most plastics (except PP, PE and PTFE). Furthermore, its ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible. Power Grab ‘n’ Bond removes the need for mechanical fixings!Originally created for facades and heavy stonework such as the installation of quoins, the versatility, strength and reliability of Power Grab ‘n’ Bond means it now used more widely by professional shop and kitchen fitters as well as specialist trades, landscapers and bathroom installers. It is tested by a UKAS Accredited lab to BS EN 12003 (Determination of shear adhesion strength of reaction resin adhesives) and BS EN1308 (Determination of slip resistance).After fitting the braces Harry and Jamie applied Power Grab ‘n’ Bond to the top side of the metal strips and laid 900x900x20mm thick heavy duty porcelain slabs in place to form the countertop of the external kitchen. How strong is Power Grab ‘n’ Bond?Power Grab ‘n’ Bond is a single part solvent free solution, with a far greater density, allowing phenomenal initial grab, even on vertical installations, and offers a final tensile strength of 22kg per cm2 when fully cured. These metal braces and porcelain slabs aren’t going anywhere soon and will provide a lifetime of outdoor dining for the homeowners. Where can I get Power Grab ‘n’ Bond?Grab also ‘n’ Bond is made in Britain with British technology and British design. Its available now in all good builders merchants nationwide and online from www.ct1.com

Case Study – Power Grab ‘n’ Bond Customer: Signal Signs – OmaghProject: Pat Kirk Car Showroom, Strabane Power Grab ‘n’ Bond Eliminates the Need for Mechanical Fixings!Mechanical fixings on bright, new external facades can be ugly and distracting, especially when being installed at the entrance of Pat Kirk Motors stunning new car showroom in Strabane, Northern Ireland.With clean lines and seamless transitions throughout the building, mechanical fixings where exactly what the architect DID NOT want. This was the challenge presented to Michael from specialist installers McLaughlin Joinery who were tasked with fabricating the entrance and installing the façade design created by Signal Signs on extra-large 1500x3000mm sheets of Dibond® aluminium composite metal panels. A Stickler for Quality!Being a real stickler for quality and perfection Michael McLaughlin believes in always using the best materials, tools and brands to ensure the best, most durable and superior finish on his projects. He immediately sourced Power Grab ‘n’ Bond as he knew it is the best construction adhesive in the market, with excellent initial grab and exceptional tensile and sheer strength. Guaranteed to adhere to metal, wood and concrete substrates it totally eliminates the need for additional mechanical fixings. Power Grab ‘n’ Bond is developed by leading British manufacturers CT1, the No1 sealant and adhesive in the UK. CT1 is always leading and providing the industry with the very latest technology. Now thanks to its unique ‘Tribrid®’ technology Power Grab ‘n’ Bond is a revolutionary product in the field of heavy-duty versatile bonding. Why Choose Power Grab ‘n’ Bond?Working with large Dibond® metal 1500x3000mm panels being installed at height in an external environment Michael and his team needed a solution that would grab, hold and act instantly without needing to be braced and supported. With incredible initial grab, Power Grab ‘n’ Bond is a fast curing, non-shrinking and almost odourless adhesive that held the metal sheets with immediate effect.Three times stronger than regular hybrid polymers, the ‘Tribrid®’ technology in Power Grab n Bond ensures a phenomenal final tensile strength of 22kg/cm2, yet remains flexible, won’t dry out nor become brittle and will work effectively in temperatures ranging from 90°C right down to the Baltic cold -40°C.In fact, not only does Power Grab ‘n’ Bond successfully stick Dibond® to wood and concrete it will adhere to all metals (including lead), stone, granite, ytong, marble, MDF, fiberglass, glass, polystyrene, mirrors and most plastics (except PP, PE and PTFE).Creating a Superior Mechanical Fixing Free FinishUsing a heavy-duty caulking gun, Michael applied Power Grab ‘n’ Bond straight from the cartridge, onto the back of the Dibond® Sheets, allowing it to rest for 4-5minutes to begin activating, before fixing them directly into place.Originally created for facades and heavy stonework such as the installation of quoins, the versatility, strength and reliability of Power Grab ‘n’ Bond means it now used more widely by professional shop fit out companies as well as specialist trades, landscapers, kitchen fitters and bathroom installers. It is tested by a UKAS Accredited lab to BS EN 12003 (Determination of shear adhesion strength of reaction resin adhesives) and BS EN1308 (Determination of slip resistance).Power Grab ‘n’ Bond provided the perfect solution as it’s the ultimate grab adhesive, eliminating the use of mechanical fixings completely and coupled with the rapid curing characteristics saved a lot of additional labour time and cost.Michael said;“The result is exactly what the architect and client wanted, a stunning external façade, with no unattractive mechanical fixings, that not only makes a statement entrance but creates a stunning backdrop for promo photos of new cars too.”Grab also ‘n’ Bond is made in Britain with British technology and British design. Its available now in all good builders’ merchants nationwide and online from www.ct1.comCT1 often copied never equalled!We Innovate – Not Imitate!

Haberdasher Street is the appropriately-named location for the new headquarters of Drake’s London, a firm that since the late 1970s has specialised in the design and manufacture of men’s ties. The choice of Crittall Corporate W20 windows was not a difficult one – given that the main section of the building dates from the 1930s it was a natural decision to choose steel windows as these would have been installed originally. The functions within the building include workshops where people handmake ties, requiring a lot of natural light.

In 2017 permission was granted for the redevelopment of an historic abandoned mill in Holmfirth into a restaurant and cookery school. It was soon clear the ground to be used for parking needed stabilisation. To completely dig out the area would have been costly and there was little time for unplanned work. ABG offered a stabilisation combination. Terrex SNW geotextile layer replaced the 50mm sand binding. Abgrid was used as a basel stiffening layer and Sudsweb tied to the grid with Abfix ties. Stone was then compacted ready for ABG permeable paving (see SuDS permeable paving Sudspave, Devour, Holmfirth)

In 2018 the University began a vast redevelopment project alongside RLF as part of the Football Foundation’s Framework. Along with our construction partners, McArdle Sport Tec, TigerTurf supplied two state of the art WETT Pro fields as well as a Rugby 360 3G pitch.The 3-million-pound project was completed just three years ago, and as a result, the facilities have been selected to host the hockey fixtures for the 2022 Commonwealth Games. This incredible opportunity meant further developments for the Bournbrook site to ensure they were ready to meet the requirements for the games.

Sitting adjacent to Manchester Victoria station, the £185m New Victoria development is a two-phase scheme initially involving two residential towers of 20 and 25 storeys providing 520 one, two and three bed apartments. The second phase being a 13-storey office block. The façade concept is a ‘hooped envelope around a glass box’ with the ‘envelope’ consisting of vertical panels from the first floor to roof level. As with any reinforced concrete slab design, the project is at risk of punching shear failure. Which traditionally has been resolved by adding further concrete, such as downstand beams or localised thickened column heads. However these measures require complex formwork and significantly reduce the benefits of the flat slab design. By incorporating the Schöck Bole shear rail system – with its ready-to-install reinforcement element consisting of double-headed studs with spacing bars to ensure correct positioning – installation is cost-effective and significantly faster than traditional loose links. In fact, Shaun Farrell of Mayo Civils, the concrete frame contractor, comments: “We were pleased to find that by using the Bole shear rail system on the project, installation was four times faster than if we had used shear links.” Shaun goes on to explain that: “when using traditional links the installation time is increased because twelve ties are involved, six of which have to be tied to the bottom steel matt, which involves getting your hands between the rebar. With the Schöck Bole six-stud shear rail, it only involves two ties to the top matt”. 

The garden, which grew out of the dark days following September 11th 2001, is helping to revitalize one of Lower Manhattan's most historic areas, celebrating the long-standing ties between the United Kingdom and the United States whilst honouring the 67 British victims of the World Trade Centre attacks.The British Memorial Garden is intended both as a living memorial and as a place of solitude, comfort and reflection, a truly British garden drawing from the many wonderful elements of the historic gardens of Britain.

Damage from the build up of moisture results in mould, mildew and condensation on windows and in the loft space. Additionally, where there is a moisture problem in the wall cavity, damage readily occurs to the insulation and wall ties, affecting wall plates, the timber frame itself and installed joinery. Preventing this from occuring is obviously a priority in the minds of all designers and builders interested in quality construction. SureCav Provides the Solution. By building with the SureCav panels instead of a using a block leaf you are providing a barrier to protect from wind driven rain.

Aykon London One is London’s luxury venture and the first of its kind in Europe. It was designed in partnership with the iconic fashion house Versace Home. Its residents will be able to enjoy the magnificent urban landscapes as well as the serenity of its private winter gardens. The building’s design make Aykon London One, the most exclusive real estate investments in London. In this new project the Effisus Breather B membrane was used for moisture management and protection of the façade against damp, and Adjoin TI tapes for the sealing of overlap joints between membranes.

Ancon TeploTie, the innovative low thermal conductivity Wall Tie, has been used in the UK’s first retrofit to achieve zero-carbon Level 6 of the Code for Sustainable Homes. TeploTie wall ties are ideal for retrofit projects as they can be resin-fixed into existing walls. The project involved the refurbishment of a semi-detached home, built in the 1840s with solid brick walls. The front elevation is internally insulated to preserve the original brickwork. The U-value of the walls is now 0.11W/mK2, 16 times better than before.

Leading Safety Installer Eurosafe Solutions Ltd chose the D-i.D Tag holder to hold Safety critical information on the roof of the recently completed Whitechapel station – part of the new Queen Elizabeth II line.The D-i.D Tag holder is designed to provide a weather & UV resistant cover to Safety Critical information.The purpose of an identity Tag on a fall protection system / Ladder or guardrail is to tell the user at a glance if the safety system is “in-test”. To perform this task successfully the Tag has to be clearly visible & easy to read. A tag which is eligible, smudged or UV faded does not give the user the information he/she requires.The D-i.D Tag holder is designed to give the end user the confidence to make an informed Safety Critical decision because;·        It is of a unique two part construction: the back plate holds the Tag snuggly in place and the front cover is transparent whilst providing weather / UV resistance.·        It is tamper proof – The D-i.D Tag is held in place by a pair of cable ties. The cable ties attach to the Tag holder in such a way as to prevent the removal of the tag without cutting the tie.·        In the event the tag insert is removed the Tag contains a warning that the system should NOT be used.·        The backplate of the Tag is opaque – this is to reduce the possibility of the D-i.D Tag holder spinning such that the back is visible to the end user & incorrect information is read. Eurosafe chose the D-i.D Tag holder as it gave them & their client confidence that the safety critical information it contained would be clearly displayed and legible for future users of the MSA Latchway mansafe systems installed.

Ancon designed and manufactured the complex stainless steel brick support and restraint system behind the complicated façade of the award-winning LSE Saw Swee Hock Student Centre. The attractive masonry façade uses 175,000 handmade bricks to form both solid and perforated areas. The Ancon stainless steel system comprises special inclined MDC type brick support angles fixed back to 30/20 cast-in channels and bespoke rolled hollow section Windposts, featuring surface-fixed channels to accept wall ties, positioned at mullion locations strategically hidden within the perforated brickwork.

HM Prison Belmarsh is a category A prison containing some of the UK’s most dangerous and high profile criminals. Being one of the UK’s most secure prisons, it is often used to contain prisoners in cases where national security is threatened.Roché are proud to play a key part in keeping the prison safe and secure. We worked alongside Protec Fire Detection PLC to deliver 14 fire-rated shutters that were tied into the prison’s security and fire management system. As well as being used for fire containment, the shutters are used as emergency segregation barriers, to reliably close-off and lock down cell blocks in case of prisoner unrest.

Leviat designed and manufactured the stainless steel support and restraint system for the brick façade on this attractive Town Centre development, voted Best Public Building in the 2014 Brick Awards.This award-winning project, designed by MICA Architects (formerly Rick Mather Architects), is located in a conservation area, home to some of the finest examples of Edwardian Grade II* brick and terracotta buildings in Newham, making brick the natural cladding choice.Brick features, including soffits, reveals and ribs, help give the building its unique character with each element being tied back to the main structural frame by special fixings from Leviat, designed to suit the specific load and cavity conditions at each location.

Lionweld Kennedy designed, fabricated and supplied modular flat packs of both steel and GRP gratings, handrails, barrier ladders and gates to the 'GDF Suez Cygnus Bravo' gas field, which is owned by Heerema Fabrications. Using both steel and GRP, Lionweld Kennedy were able to design a system of walkways and handrails around the 250km2 field. Cygnus Bravo is an unmanned satellite wellhead platform tied-back to Cygnus Alpha’s processing platform. Cygnus Bravo is located approximately 150km off the coast of Lincolnshire, UK.Both our steel and GRP products can withstand harsh environments, such as oil rigs due to their durability from the high-quality material.Using both products in conjunction allows for a cost-effective flooring and safety solution for the client.

Located in Brixton, The Department Store Studios is a five-storey contemporary office building, offering flexible co-working space alongside generous amenities including a bike storage, showers, lockers, a screening room and a bar and restaurant. The workspace has been designed and built by renowned architecture firm Squire and Partners, to be used as an addition to its own London office, in a new build property framed by cross-laminated timber. Early involvement with brickwork contractor, Lyons & Annoot, allowed for a seamless, homogenous brick build on this project. Working alongside main contractor Lyons and Annoot, from tender stage to completion, Leviat designed and manufactured a bespoke masonry restraint system which was used in the internal blockwork walls, as well as Ancon Wall Ties, Head Restraints and AMR Masonry Reinforcement in the façade.

Architect: Wellwood LeslieInstaller: Profile Projects LtdProduct: ‘Shiluvit’ by OranitOver 400m2 of Shuluvit panels in WN-2592 (Oak effect) stained yellow pine in 7-600 format were installed across the ceilings of the 2018 Carnoustie Golf Link extension project.The extension was designed to complement the famous golf course; adding new facilities such as golf simulators and The Rookery Scottish-fusion restaurant and bar designed to make the club more accessible to the public.The Shiluvit panels along with LSA Black acoustic mineral wool were used to give a subtle dampening to the spaces and offset the large windows and skylights and exposed metalwork. Flexible panel cross ties were used to allow for a smooth wrap-over ceiling installation.

The £6 million Sandiefield Building Scheme for New Gorbals Housing Association – comprising 29 offices and flats – was completed in July 2019 and constructed by CCG limited and Interlocked Construction.AG supplied its well-established Plaza paving, in Salt + Pepper (400x200x80), to provide a beautiful and robust hard landscaping solution for the surroundings outside the centre. This product was integrated into the design to create polished, smooth lines and was supplied in various sizes (Plaza Pepper 200x100x80) to create aesthetically-pleasing patterning effects to the finished look.David McCandlish, Regional Sales Manager at AG Scotland, said:“We quickly identified Plaza, in Salt and Pepper, as the perfect fit for this major project. Plaza is a heavy-duty solution that is equipped with slip resistance, which will be important, given the high volume of footfall at the centre. This project tied in with another Medical Centre at New Gorbals for which Plaza and Xflo Plaza products were used.”AG’s Plaza paving is produced in the UK using locally sourced materials. 100% renewable energy is used during the production process, something AG has been devoted to implementing across all of its manufacturing locations.

AG was delighted to continue our partnership with Braidwater Homes at one of the house builder’s most prestigious private housing development, Castlehill, located just off the Ballygowan Road in Belfast.Braidwater Group’s Chief Operating Officer, Ryan Boyle said:“AG’s paving and walling products which are aesthetically pleasing, tie in totally with Braidwater’s ‘living the dream’ aspirations. For the Castlehill development we had a number of requirements, which included ensuring that the landscaping tied in with the modern feel of this high-end development.” To this end, we utilised AG’s Vertica® and Diamond® retaining walls, where appropriate, together with AG’s River Stone 3’s set pavers in contrasting tones.”AG’s Regional Sales Manager, Barry Scott commented:“We have a really good relationship with the Braidwater Group and are currently involved in a number of their sites across Northern Ireland. The Castlehill contract was an important one for us and we have worked hard to ensure we live up to their high standards. As part of our commitment to Braidwater I personally make visits to their sites to ensure their team always have the products they need. Our personal service supported by speed and ease of delivery is something they appreciate. They also like the fact that by utilising our Anchor® Diamond® mortarless/pin-less segmental retaining wall system their team can work on in wet weather with no breaks in construction.”

Thriving family run garden centre upgrades their automatic sliding door entranceLocated in Ayrshire, the long established Hayes Garden Land Symington replaced their existing entrance with a new solution.Project Year:  2022Product: ASSA ABLOY SL500 Frame 4 Panel Bi-parting door. Project Background: As a returning customer, Hayes Garden Land approached us with a brief to replace their tired sliding door system with a modern solution which also tied in with the existing building fabric and internal decoration. With energy prices soaring, it was also important to come up with an efficient solution which maximised heat retention within the building.Solution: We successfully designed, manufactured and installed a 4 panel bi-parting SL500 fully framed system in matching Terra Brown finish, resulting in a seamless integration within the building. To mitigate operational issues & improve safety features - due to close proximity of internal swing doors - we supplied and installed clear glazed barriers and removed several potential risk factors during the design process. The end product is a modern, compliant system which has also added energy efficiencies due to the double glazing and upgraded aluminium profile system.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

Challenge:Driven by a respect for the environment, Heritage Homes wanted to create energy efficient homes for the future. A high sustainable build standard was required as part of their prestigious ‘Future Collection’ homes for the phase two zero carbon homes development.Solution:IG’s Hi-therm+ lintels use a patented combination of a polymer isolator and galvanised steel to bond the internal and external walls together by spanning the intervening gap creating a powerful thermal break. The one-piece lintel solution accommodated different lengths to minimise and conserve energy for each home by reducing thermal bridging at non-repeating junctions. IG’s technical team determined the loading and specification requirements at window and door openings. This fabric first approach contributed to an AA* energy efficiency rating and ensured each home built was comfortable, energy efficient and modern for years to come.IG’s LP windposts accommodated different lengths and factored into account wind load conditions. The windposts were installed into the inner skin of the cavity walls spanning vertically between the floor structures, providing additional lateral support for the large panels of brickwork and openings. All windposts included top and base place connections for fixing to the structure along with ties.Testimonial:“At Holland Park our homes are built with an AA* energy efficieny rating. IG’s Hi-therm+ lintels provided a fabric first approach to improve the thermal performance of our homes by reducing thermal bridging at non-repeating junctions”.Guy OlliverCommercial and Technical Manager at Heritage Homes

The Beckett, a new retirement village close to the centre of Royal Tunbridge Wells, in Kent, comprises three luxury apartment buildings of three, four and six storeys. The contemporary design provides 89 quality appointed apartments with a landscaped garden, all arranged around full-height atriums, allowing natural light to reach the centre of the buildings. The upper floors are set back, providing generous terrace areas which include a ‘sky lounge‘. All three buildings are concrete frame and as with any reinforced concrete slab design, The Beckett is at risk of punching shear failure, which traditionally has been resolved by adding further concrete, such as downstand beams, or localised thickened column heads. However these require complex formwork and significantly reduce the benefits offered by the flat slab design. The Schöck Bole shear rail system counters any punching shear risk and is cost-effective and significantly faster than traditional loose links – as much as four times faster in fact. This is because when using traditional links it involves far more ties to the reinforcement matt than when using the Schöck Bole. The ready-to-install reinforcement element consists of double-headed studs with spacing bars to ensure correct positioning. Two spacer bars are welded to the vertical studs, which ensure the correct distance between uprights and the forged stud heads guarantee a perfect finishing bond with the concrete. The dramatically reduced fixing time far outweighs any additional material costs that may be involved with a prefabricated system.  

We adapted our aluminium window specification to meet the narrower than normal vent dimensions at the best-in-class £52 million student village in Coventry, balancing requirements for daylighting, ventilation, student safety and aesthetics. A total of 3,500 sqm of aluminium windows together with aluminium curtain walling and aluminium high-traffic doors were fitted at the 893 home development. The installation not only contributed to the creation of an uninterrupted, zero combustible facade, but also provided maintenance solution for the building owner. Paradise Street has been architecturally inspired by the originally medieval city of Coventry. The scheme's homes are arranged in a wall, and three towers to address the busy ring road, with a gatehouse opening into a 2,000 sqm piazza. Balancing the ventilation and necessary daylighting requirements led to the introduction of a fixed and opening vent to each room. This presented a whole new design challenge when it came to the window detailing, hailing a true example of design and technical collaboration between the architect, contractor, fabricator and TECHNAL. Complementing the subtle textures used for the facade's anodised aluminium panelling as well as the interior colour scheme, the TECHNAL systems are dual colour. Externally they are finished in pearl beige and white, internally. Other TECHNAL systems used for this project include the visible grid curtain walling. This is installed into an angled brickwork detail, creating an interesting wedge shape design to the common room space. To the main entrance, TECHNAL high traffic aluminium doors have been installed and tested to Secured by Design standards. These feature maglocks and automatic gearing that are tied into the building management system, ensuring all doors open in the event of an evacuation.

Clarendon is a project undertaken by Berkeley Group in North London, as part of a regeneration scheme that will provide over 1,700 homes and 125,000 sq ft of commercial space.This project aims to make the best use of brownfield land and also highlight the benefit of master planning which helped the scheme win “the best 2022 planning award”.Sayfa Group supplied the Clarendon project through a partner contractor, responsible for the height safety and façade access systems throughout the project. There were various base types and styles required for a variety of locations such as balconies, terraces, and rooftops. However, of all the varieties there is no greater example of planning ahead than the Cast-In Davit Base.Why Davit cast-in bases?Davit systems are an essential solution for cleaning and maintenance strategies. They provide easy and safe access for rope abseil teams to access a building's façade.Cast-in Davit bases are the most cost-effective type of base for both initial and life cycle price basis. The Davits bases are set out to specific datums and are generally tied into the rebar instead of the traditional process of drilling concrete and resin fixing. The process for which is often time consuming, highly weather dependent, and prone to human error. The method of casting in bases accelerates the programme by removing interfaces and potential delays between the trade activities of installing the posts and insulating/weathering the surface. Beyond installation the ongoing maintenance price or 'lifetime cost' of 6 monthly LOLER inspections is significantly reduced. Non-cast in Davit Bases require a thorough examination of the fixings which may include torque testing if required. Visit our LOLER Testing and Inspection Guidance for more information.To learn more about our EdgeSeil range visit our Products Page or get in contact with the Sayfa Group Team.

 Case StudyWAGWORKS, FULHAM, LONDON Architect: Simpson StudioConstruction Company: Fileturn LimitedProject Installation Dates: 2022Flooring Systems Installed: Bolidtop 525 Deco with textureless anti-slip (54720)Colour:  S 4030-G50Y with flake 2/52-3 Stratum were specified to install a hygienic, safe, easy to clean, scratch resistant floor to the first of this brand new up market chain of doggy day care centres in Fulham. Stratum provided the trendy space with an attractive floor to match the other natural materials and colours in the scheme. The resin needed to be installed over a metal panel raised access floor in the main circulation areas. Challenge-      The resin needed to be installed over a metal panel raised access floor in the main circulation areas.-      To select a colour and finish that would sit alongside and compliment a range of different materials chosen for the interior spaces.-      To carefully programme in the work and co-ordinate with the other trades on the project.-      To provide a floor soft enough for doggy paws, yet hardwearing and anti-slip whilst maintaining ease of cleaning.-      To arrange for products to be delivered to a busy street in London with only front access  Solution-      Bolidtop 525 Deco was selected with flake system and textureless anti-slip coating in a shade of green with black flakes. -      Cement boards were laid on top of steel raised access floor.-      To work closely with Fileturn Limited to ensure timing of delivery and programme goes to plan.   Benefits/Installation-      The Stratum system is the most visible floor finish in the main space. It covers a well used pathway, providing a soft flexible floor, with a smooth slip resistant finish.Result-      A perfect floor for heavy footfall (and pawfall) that is easy to clean and ties in beautifully with the modern, natural scheme.

Situated in Bedfordshire, Millbrook Golf Club is a magnificent golf course that sought to enhance specific areas of its course to ensure year-round suitability.In this case study, the greenkeeping team focused on improving the walk-on walk-off areas of newly constructed tee boxes to prevent erosion and the formation of muddy or boggy ground during the winter months.To create a pathway that would offer exceptional grass protection while preserving the natural beauty of the course once the grass beneath had grown, the team opted for our rubber grass mats.Our rubber golf path matting is highly sought after due to its remarkable benefits, including durability, ease of installation, permeability, and compatibility with wheelchairs and golf carts. These attributes make it the perfect solution for a wide range of projects and applications.Robert the Millbrook course General Manager told us; "We chose rubber grass mats to be used for the walk-on walk-off areas to two of our tee boxes, one of which has recently had a new pathway to the rear of the tee installed".Rubber Grass Mats On The 7th TeeExtending from the 6th green to the 7th tee, this particular section of the course experienced noticeable wear and tear. Without careful maintenance from the greenkeeping team, it could easily become an extremely boggy spot.To alleviate the risk of muddy ground in this area, the team devised a plan to revamp the space. They constructed a new pathway at the rear of the tee and re-turfed the slopes on either side. The surface of the path was then adorned with artificial grass. In addition, the lead-up to the artificial grass path was covered with our protective rubber grass mats. These mats were effortlessly laid in place by the team using plastic fixing pegs and cable ties.Once the area has matured, the golf path mats will become nearly invisible, providing a natural-looking yet protective surface to ensure the course remains in optimal condition for its members throughout the year.Robert kept us up to date with their progress; "Our Greenkeepers have been busy putting the finishing touches to the 7th Tee. Turfing the slopes, laying artificial grass for the path and installing a rubber grass mat infrastructure which the grass will grow through".Rubber Grass Mats On The 12th TeeSimilar to the work done on the 7th tee, the team at Millbrook devised a plan to enhance the approach from the 11th green to the 12th tee using our rubber grass mats.To enhance year-round usability regardless of weather conditions, they improved the approach to the tee box from the 11th green by installing our rubber grass mats. These mats were laid out, interconnected with cable ties, and easily secured in place using plastic pegs.Once the grass grows through the carefully designed holes in the rubber grass mats, the course will maintain its natural appearance while benefiting from a reinforced pathway that prevents the formation of boggy areas.Robert again informed us of the upgrade of this tee approach path; "The 12th Tee approach work is progressing really well thanks to our greenkeeping team. The area around the 11th bunker has also been re-turfed".The ResultRobert and the team are delighted with the project's outcome and the advantages provided by the rubber grass mats. Some club members have also expressed their appreciation for the new tee boxes and approaches on the Millbrook Facebook page; "The tee boxes looked very smart on Saturday".We are thrilled that our simple yet highly effective rubber grass mats have proven to be a resounding success for Millbrook Golf Course.Our exceptional golf pathway mats have assisted the greenkeeping team in achieving their objective of creating reinforced and natural-looking approach areas for their new tee boxes. Undoubtedly, these improvements will benefit the team, members and the course for years to come.For more information on our rubber grass mats and other rubber surfacing solutions, or to request a quote for an upcoming project, please do not hesitate to contact us.

Cannon Green’s RC cast in situ polished concrete staircase is an Ocubis project in conjunction with John Robertson Architects (JRA), Civic Engineers and Six Smith Build. Lazenby built and installed the 21m long, 7m high and 7.5m wide (at the top) inverted amphitheater cast in situ Pewter concrete staircase. This staircase was designed by JRA and structurally engineered by Civic Engineers, incorporating BIM modelling due of the intricacies of the reinforcement design. This self-supporting staircase is tied into the structure with a steel stringer to convert the loads and moments down through the steel columns.Lazenby installed traditional formwork to create the stepped soffit that leads up to the inverted amphitheatre steps. Lazenby then installed a false work system (from Ischebeck Titan/Inform UK) enabling the formworkers to create the radius former inverted amphitheatre undercarriage that is visible from the restaurant (Drake & Morgan). The reinforcement was then added to the soffit and steps; the carpenters then added formers and attached nearly 700 DDA studs to the formwork prior to the casting of concrete.Lazenby’s integral-coloured Pewter polished concrete was batched on site into a C32/40 concrete supplied by London Concrete. The project used approx. 24 cubic meters of concrete and 6 tonnes of steel reinforcement. Ground floor to the top landing and seating area is just over 4m high, 21m long and 7.5m wide with 24 shallow risers and 3 functional landings. The first 3m wide step widens to a 7.5m inverted amphitheatre style landing featuring single and double height steps.Lazenby’s 8 master craftsmen were onsite for the duration of this 12-week project. Lazenby won the Cannon Green project based on the ability to deliver unrivalled experience for projects of this scale and magnitude. Engineering from Civic Engineers, design by JRA and experience and know-how from Lazenby’s master craftsmen created a steel and concrete masterpiece of exacting standards.

The ChallengeThe village of Ewerby sits within the heart of the Lincolnshire Fens, amidst a heavy farming community highlighted and punctuated by the local architecture.Historically, Lincolnshire villages produced their own, indigenous facing bricks from brick pits, and most farm buildings and tied cottages within this community are constructed from Ewerby Yellow facing brick. Together with local Ancaster limestone and handcrafted clay pantiles, this forms the pallet of materials that are considered indicative of the local vernacular architecture. As such, careful consideration needed to be given to the choice of materials used in building The Elms.The SolutionCombining existing detailing and colourings gave architects D.B. Lawrence Associates a strong initial concept for their first stage design process. Sourcing bricks and materials that blend with their surroundings can be challenging, but they were successful in achieving this for The Elms.A yellow stock brick sourced from Forterra was an important part of the concept. The brick was used alongside the use of local Lincolnshire limestone quarried seven miles away at Ancaster. Handmade clay pantiles were sourced to match existing roof tiles.The brickwork was constructed in English Bond to achieve the desired aesthetic and reflect the existing surrounding outbuildings.Complementary Stone quoins, cills and heads together with dog-tooth oversailing courses to the eaves and verges were also used.The brick chosen was Ardleigh Yellow Stock Brick from Ecostock. Ecostock is the most sustainable stock brick available in the UK. It is a high quality facing brick with recycled content. The range carries BES 6001 Responsible Sourcing certification.The BenefitsThe overall intention of the dwelling is to replicate a barn, and careful thought and detailing to the large openings have helped to create the desired effect.When approaching the village of Ewerby from Thorpe, the barn gives the impression of having been there for years, not months. The build has successfully fulfilled the requirements of the planners, and the client has contributed an inspiring development worthy of the village.

Following the specification process with the London office of Planit-IE Landscape Architects, Artform Urban Furniture were appointed by Vastint UK to provide a considerable number of bespoke concrete benches alongside street furniture elements including litter bins, cycle parking and picnic sets to a newly built neighbourhood in the east of London. At the time one of the largest residential developments in Europe.The bespoke concrete block benches, some of which are clad in hardwood toppers, were designed and manufactured specifically for this project, echoing the light reflective architecture of the newly built studios and apartments. Great lengths were taken to find the perfect mix of aggregates to achieve the specifiers preferred colour mix and match paving being used on site. Sample blocks in the concrete and granite were supplied with & without timber toppers to make sure all stakeholders were happy with the final look/ colour. Stainless steel cycle stands are abundantly scattered around the car-free space, encouraging a peaceful and emission free environment. Likewise the sophisticated minimal design of the Spencer litter bin reflects the surrounding ambiance whilst keeping the area clean and tidy.The 26 acre project to revitalise this once-crumbling industrial site began back in 2013. Garnering widespread attention for its simplistic and sustainable design.The entire neighbourhood is divided into 13 plots, each designed by one of nine different architects.The Dane’s Yard area is the first completed phase of the Vastint UK master plan in bringing a brand new neighbourhood to London. The name of the area, Strand East, was changed to Sugar House Island in 2017 with Vastint looking for a name that has stronger ties to the community and its history. The sentiment is evident throughout the project in the refurbishing of old warehouse buildings, yards, and alleyways.Once completed in 2024 Sugar House Island will feature more than 624,000 square feet of office space, 1,200 homes, and nearly 131,000 square feet of green space. Developers have also made room for new restaurants, cafés, shops, a primary school, and a 350-bed hotel. Developers expect the project to create 2,500 new jobs.