"steel doors"

The sides of the pontoon, bridge and ramp at Battersea’s river boat service required ultra safe balustrades. These had to be a natural fit to the industrial environment. The Square Line 60x30 stainless steel balustrade perfectly suited the job. Its stainless steel posts were welded to the pier for extra robustness, and toughened glass infills of 10 mm thick were added. The Q-lights Spotlight LED system was invisibly embedded in the handrails for extra safety at night. The industrial looking stainless steel elements of the Square Line 60x30 system add to the appearance of the pier.

The new Vista apartments occupy an enviable location, close to Chelsea Bridge and overlooking Battersea Park. As a high-end residential project, the landscaping was given a high priority.Lang+Fulton were approached by the architects to propose a suitable stainless steel grating for pedestrian use, which would ventilate the underground car park. A grating with a heel proof mesh of 55x11mm was recommended and was designed with support beams and anchor bolts. The stainless steel was pickled and polished. In addition, 31m2 of galvanized mild steel grating with 66x33mm mesh was supplied for an area which was inaccessible to the public.

Timber Window Project: Restoring Charm to a Matlock CottageDiscover how Gowercroft successfully transformed Robert Jones's quaint stone cottage in Matlock with high-quality timber windows and doors.A Challenging Derbyshire CottageWhen Robert Jones approached Gowercroft for his cottage renovation in Matlock, they faced an intriguing challenge. His 200-square-meter, 5-bedroom cottage nestled into a Derbyshire hillside, offering stunning countryside views. The property had three stories at the front but only one at the rear, with the ground floor patio situated atop an integral garage.Robert aimed to breathe new life into the neglected property by undertaking a comprehensive refit, including new electrics, bathrooms, stairs, carpets, roofing, garage, and replacement doors and windows. He sought a renovation that honoured the local aesthetics, using durable traditional materials like English slate for the roof and energy-efficient timber windows and patio doors to maximise the scenic vistas.Meeting the ChallengeAccess to the property posed a considerable challenge due to its location on a sharp bend with a steep incline at the end of a winding country road. The installation of oversized windows and doors seemed daunting, but Gowercroft embraced the challenges with creative solutions.Gowercroft crafted and installed eleven Hardwick flush casement windows, a Peveril lift and slide patio door, two floor-to-ceiling fixed light windows, an Accoya® front door, and a timber Melbourne stable door at the side. The lift and slide patio doors and glazed screens had to feature 6mm-thick glass to ensure structural integrity, making each unit weigh approximately 200 kilograms.Given the size and weight of the units, manual handling was impractical. Gowercroft enlisted a specialist contractor with a telehandler to navigate the steep drive and hoist the units into place. Additional personnel joined the effort."The job demanded teamwork, meticulous planning, and coordination with the ongoing building work as we removed the old windows and adjusted the existing openings," Robert explained.Exceeding ExpectationsThroughout the installation, unforeseen challenges arose, including the need to cut away patio paving slabs blocking the original patio doors and repositioning the door frame to accommodate the new Accoya® front door. Gowercroft even provided window boards for the new openings.Robert praised the Gowercroft team for their exceptional dedication and problem-solving attitude, stating, "I can't speak highly enough of the Gowercroft team. They tackled every obstacle and challenge with a 'can-do' spirit."Gowercroft's commitment to quality craftsmanship and their ability to navigate complex installations allowed Robert Jones to transform his Matlock cottage into a charming and energy-efficient retreat that perfectly complements its picturesque surroundings.

Opened in June 2017, RIBA North is RIBA’s nationalarchitecture centre based at Liverpool’s Waterfront. Aninspirational resource for both members and the public,it plays host to a variety of architectural exhibitions andtalks.Because of the prestigious, landmark nature of theproject, Allgood was selected by architects BroadwayMalyan to deliver a bespoke ironmongery specificationthat would seamlessly integrate with the 2.4-metre-highglass doors in the front entrance, gallery and WCs.Allgood designed and manufactured bespokestainless-steel pull plates that were laser etched withRIBA font lettering in-house at our Brearley Streetfactory. The pull plates were required to integrate with arange of glass doors, which meant detailed setting outto ensure compatibility of fixing mechanisms with thespecific toughened glass construction, to avoid any riskof unnecessary strain on the glass material.Further bespoke elements included custom-made pushand pull handles that were fitted to toilet cubicles withconcealed fixings to deliver the desired contemporaryfinish to complement the modern aesthetic throughoutthe building The project is testament to the combined effort of thedesign teams as it involved months of collaboration andplanning between Broadway Malyan, the main contractorISG, and the specialist door providers, to ensure thechosen designs translated into end products that metmechanical compatibility and performance requirements.Allgood was involved at all stages, from inceptionthrough to the manufacturing and delivery. As well asbespoke products, the iconic Modric and Mode ranges- which are crafted from grade 316 solid stainless steel- were selected for their durability and sleek design.These were specified in the RIBA staff spaces, such asthe meeting rooms, offices and staff accommodation.

Named after Francis Crick, the scientist who helpeddiscover the structure of DNA, the institute is an ambitiouscollaboration of six founding research partners: the MedicalResearch Council, Cancer Research UK, Wellcome Trust,UCL (University College London), Imperial College Londonand King’s College London.The world-class biomedical research facility aims todiscover how and why disease develops in order to findnew ways to prevent, diagnose and treat conditions suchas cancer, heart disease and stroke, as well as infectionsand neurodegenerative conditions. Located in centralLondon, the steel, glass and terracotta clad buildingoccupies a full city block and creates strong architecturallinks to historic local buildings. Large cantilevered baywindows and tall glass atria reduce the building’s impact atstreet level and maintain natural light in workspaces andpublic areas. The challenge for Allgood on this project wasto create an ironmongery specification in keeping with thefacility’s elite standards.The Contego range is an antimicrobial copper product,made from a copper alloy, giving it the appearance ofstainless steel while incorporating the bacteria fightingqualities of copper.Killing 99.9% of bacteria within minutes of exposure, therange offered a unique functional capability to the researchcentre, while still matching the interior aesthetic. Contegolever and pull handles were supplied to glass doorsincluding: office and lab doors, while push plates weresupplied to the auditorium and back of house areas.Additionally, Allgood Secure supplied automatic dooroperators to the main entrances of the labs, with fobreaders fitted for Contego lever handles in higher securityareas.

Heavy duty hinge Wash basin SolutionPROBLEMKey IssuesWhen using concealed hinges on wide doors, a several hinges must be used to support the door, otherwise it will sag.Product InformationOne-touch Heavy duty concealed hinge J95— Suitable for heavy doors up to 25 kg (2 hinges) and 40 kg (3 hinges).— Can also be fitted to glass doors by using the optional glass door faceplate.— Easy, one-touch attachment and removal of the door.SOLUTIONThe SolutionThe use of high load-bearing hinges meant that even wide doors could be supported with fewer hinges.Issue of wide door saggingConcealed hinges are essential for opening and closing furniture doors. However, with wide doors, the door will often slope downward, or “sag,” unless many hinges are used. This article will explain how this problem was addressed.What causes the doors to sag in the first place?The following are some of the reasons why a door may sag:— The door is too heavy— The door is too wide— The interval between the hinges is too short— Too few hinges are usedThe common issue with all of these problems is that the hinges cannot support the weight of the door.The Powerful J95 hinge to support even the heaviest doorsThe J95 concealed hinge is an ideal solution for hanging wide doors. This is specifically due to its high load-bearing capacity: 25 kg for 2 hinges and 40 kg for 3 hinges. It is possible to support heavy doors with fewer hinges than with conventional ones.Support 800 mm wide doors with just two hinges!A luxury hotel in Korea used the J95 concealed hinge for the bathroom sink plumbing maintenance door. Due to the 800 mm width of the door, it was necessary to use at least three conventional hinges, but with the J95, only two were needed. Since only two J95 hinges are required, it creates a cleaner and more visually appealing appearance. Additionally, since the same type of maintenance door was needed throughout the hotel, using only two hinges greatly decreased the overall installation time.

Automatic sliding doors provide patient comfort at outstanding healthcare facilityThomas Audley Ward at Homerton Hospital, London - The trust operates acute services from a single site: Homerton University Hospital, which opened in 1986. Based on an aggregation of ratings across all of the core services provided from the hospital, the hospital has been rated by Care Quality Commission as ‘Outstanding’.Architect – Hunters ArchitectsProduct – SL500 bi-parting doors in slim-eco profiles with fixed side screens of up to 8 panels covering 6.7m on 4 separate bays.The works encompass a full ward refurbishment comprising of layout changes, floor, wall and ceiling finishes, sanitary appliances, mechanical and electrical installations, fixtures and fittings renewal and internal doors.Working alongside the project lead architect, we assisted with the design to create 4 new ward entrance screens, to assist with reducing noise and air pollution, creating a more welcoming and comfortable patient environment. Our slim-eco door profiles were chosen and also provided with our unique TightSeal system, minimising any gaps around the doors. In addition to the door profiles, directional activation units were installed, contributing even further to eliminate unnecessary opening cycles. 

Catnic's lintels have given definition to Beaumont, a stunning Country and Coast Homes development of 6 large houses in Highcroft, Exeter. Approximately 60 1.25inch CX cavity lintels were supplied, which support the sharp, unusual shape of the architect-designed buildings, were chosen for their strength, reliability and thermal capabilities.The lintels support the exterior window and door features; special corner lintels support the external over-eaves, while large window openings elegantly contour the shape of each house. Chosen specifically to support the specialist architectural features of the development, offering both the structural and thermal performance required for the building envelopes.Constructed using the traditional brick and block method, the building facades were then finished with a white K-render to all external elevations.Consistent with Country and Coast Homes' portfolio of luxury contemporary homes, the development features superior quality fixtures inside and out. As a brand synonymous with quality in the construction industry, Catnic reflects this too. County and Coast Homes focuses on exceptional attention to detail, it only uses the most reliable and durable products in the construction of its homes. Chris Dodge at County and Coast Homes said: "We have been using Catnic Lintels for over 10 years, they are by far the best. A superbly well organised company who offer exemplary service, their lintels are extremely capable and well suited to our high quality homes."Country and Coast Homes prides itself on a high level of sustainability in each development. Catnic lintels surpassed the energy targets in this particular development by helping deliver the efficiency required to achieve a B on the EPC rating.

Amongst the three solutions offered Intastop’s Door Top Alarm was considered to be the best option. The conclusion of the clinical group was that the Intastop Door Top Alarm would provide a robust assistance aid to ward staff and provide an early warning measure.

ASF used the Exmouth Stainless Steel Post and Rail system to manufacture bespoke handrailing for the new handrail installations at Exmouth Beach. Manufactured in marine grade 316 stainless steel and finished bright polished to avoid discoloration, each of the 12 stepped areas required individually measuring and bespoke rails manufatured to suit.

At The Sash Window Workshop we have been replacing and renovating timber windows and doors for various properties across London and the South for over 25 years.We were approached by an interior contracting company who were looking to replace the timber windows and doors for a property in South West London.The company requested new windows and doors which fitted the following specification:New traditional windows to match the existing style and be period appropriate;The highest possible thermal and acoustic performance;The maximum amount of light transmission possible through the glass;Bespoke window ironmongery;Painted internally to meet the customer’s specific paint colour requirements.Upon receiving the request for a quotation, one of our trained surveyors met with the architect for the project to discuss their requirements and advise how we could help. In total they required over 20 new sash windows and timber casement windows, and 4 new external wooden doors.As all of the new windows and doors that we manufacture are bespoke, we were able to ensure that their replacement windows and doors exactly matched the original designs, meaning that they fitted in with the surrounding properties and retained the aesthetic look and feel of the property.Due to the location of the property, all the new windows had to be carried up through the property by our experienced installers to be fitted.Both the customer and contractors were very happy with the work carried out, which helped transform the property into a beautiful home.

Premier Security & Fire Consultants Ltd are the UK’s leading provider of Secured by Design security door sets and we were proud to be engaged by experienced contractors Durkan to supply and install our products at this excellent assisted residential care centre and day centre for the elderly.The Premier team supplied and installed the 28 internal doors as well as the LPS1175 SR2 security entrance door with associated Secured by Design post boX installation. The internal doors were all fitted with power-assisted closers.

High performance, made-to-order, timber, traditional flush leaded light casement windows and doors from the Lomax + Wood Kensington & Chelsea range have been specified for a stunning new build property located on the private Coombe Hill Estate, Kingston upon Thames. The 12,000 sq ft property designed and constructed by an award-winning London developer offers unparalleled views towards Richmond Park, Wimbledon Common as well as the legendary and adjacent Coombe Hill Golf Course. Made-to-order wooden windows from knot free engineered timber were supplied as fully finished windows and doors with leaded lights.

Premier Security & Fire fabricated and installed three Secured by Design steel security gates and fencing for instructing clients MDP Communications Services at their project in King’s Cross, North London.Premier’s gates have been tested by the BRE (Building Research Establishment) achieving LPS1175 SR2 security status and sit alongside our dual-certified LPS products in a portfolio of more than 250 designs, including communal entrance doors, screens and curtain walling.Check out our website for more information. www.premier-ssl.com

Lockerpods bike locker offer safety and security for your bike. Manufactured from recyclable, low density polyethylene, the LDPE is UV treated and will not deteriorate or dis-colour over time. The door hasps are made of protected Stainless steel tabs, drilled to accept padlocks. Internally it is designed so that a ground anchor can be installed to accept a D Lock or chain for additional security. Lockerpods are weatherproof so your bike is kept clean and dry and there’s space to store your helmet and other bike kit safely with your bike.

Nissan Sunderland is one of the largest, most efficient car plants in Europe. On average, the plant has built a Nissan car every two minutes since production started.Project/doors:10 Speedor Cleanrooms (Over 200 doors supplied to the plant)The challengeFollowing the manufacture of a new paint plant where Hart have a number of doors including several ATEX, Nissan identified a requirement for new repair lines to enable them to carry out both light and heavy repairs and not have to completely repaint the vehicles. This is fast moving environment with the need for a reliable and dust reducing solution.The solutionUsing a tried and tested solution, Hart installed these “hybrid” Speedor Cleanrooms with ATEX operators within the repair zone. We worked closely with site engineers to give them the solution they require, rather than a door to fit an opening. The Speedor Cleanroom maintains strict air leakage requirements over specified pressure differentials and a non-touch safety light curtain which ensures maximum protection to personnel. The successHart is a trusted supplier to Nissan and its subcontractors. Having worked on the site since it’s inception, Nissan approached Hart to supply the doors. Following this Hart were approached by an OEM who provided a full spray booth, after Nissan insisted Hart Doors were specified due to the success of the earlier installations.The review“Speedor is a tried and tested product that is why we keep using them.” Nissan Motor Manufacturing UK Ltd

HAG was honoured to be chosen to install industrial doors on the new headquarters for the Dorset Fire Service, designed by Prince Charles. The £3 million building included grand neo-classical design and a mock balcony, which meant HAG had to be particularly careful in the design and planning of the installation. The specification was to match the styling of the three-storey fire station while still providing the high levels of security and ease of use required for the situation. Our industrial Q Doors perfectly balanced the stunning aesthetics with the structural integrity and functionality required for this prestigious contract.

Following consultation with the city planning department, Mather & Ellis Stonemasons ordered Clement W20 steel windows for phases 3,4 and 5 of works completed during 2014. Steel windows were replaced in many of the University’s fine buildings including The Beyer Building, John Owens Building and The Christie Library. Although the Clement W20 steel window system was used throughout, every building had individual design and installation specifications to maintain the correct appearance.

We’re always so pleased when we hear from customers who have opted to use our products for their projects.When we received an email and some impressive before and after photos, from one such customer who had used Polytrol colour restorer to revive his garage door, we’re not exaggerating when we say that there was an audible buzz of appreciation in the Owatrol office as we took in the transformation.It was then that we knew that we had to share how Brian (our happy customer) had achieved this result, so that our other customers could benefit, too.First, clean your garage doorIf you want to replicate Brian’s success, it’s important to ensure that your garage door is prepped before application. Your door must be clean and free of any dirt, grease, mildew or grime.A bit of elbow grease and a bowl of soapy water is usually all you’ll need to do the job. However, if there’s any mildew on your garage door, scrub on a 50:50 bleach and water solution, leave it for 10 minutes, then rinse it off.If you have any polishes or waxes on your garage door, you will need to remove these too.Before moving on to the next step, ensure that your garage door is completely dry.Now it’s time to apply PolytrolA deep penetrating oil, Polytrol works by penetrating the surface of your door and re-wetting the pigments. This restores the colour that has been lost over the years, through exposure to pollution, rain and sunlight.Using a brush or a cloth and only working in sections that you can complete in 10-20 minutes, apply a liberal layer of Polytrol.As you work, if you notice any particularly matt and shiny patches, it means that the surface is absorbing Polytrol unevenly. If this happens, just move any surplus oil over to the matt areas.Allow the product to work for 10-20 minutes, then wipe off any excess with a clean, lint-free cloth. If you want a shinier finish, you can also buff the surface with a lint-free cloth.It really is as simple as that…Now, you just need to leave Polytrol to dry.One of the great things about Polytrol, is that it has been designed to dry to a tough and long-lasting flexible finish but with no film, so you won’t need to worry about it peeling or flaking.Plus, Polytrol is now also available in a spray can, to make application super simple.“Couldn’t have wished for a better result”Brian informed us that he:“just chanced upon your advert while browsing the net looking for a product that would improve the look of my door, and I am so very glad that I did…”In his email, Brian also said he “couldn’t have wished for a better result”. We have to agree – his garage door has been totally transformed.

When the Vivienne Westwood group wanted to project their brand image on to their outlet entrances, they contacted ASH directly to design a door handle.Using the well-known iconic orb logo as a starting point we created a unique polished brass profile with engraved features which reflects their brand and also feels comfortable to touch and operate.We are proud to have provided such a bespoke handle to the location in Nottingham, the same city where the handle was manufactured, and even prouder to see the handle still on the doors 15 years later, providing a testament to the quality and durability of our products and craftsmenship. 

As part of the extension to the Tate Modern there was a requirement for doorsets with unusual characteristics. The RC4 security rated doors were quite large at 3m x 3m which, combined with the need to clad the doors in the same material as the building, created potential certification issues.Teckentrup was part of the team for the project and worked with the test houses through the design process to achieve a solution for the building.

Rutherford House is an imposing 58,000 sq ft office building located within the heart of Birchwood Park, Warrington, providing superior office space to rent for small, medium and large businesses employing up to 100 people. Consisting of two wings of three and five floors, the building has excellent natural lighting and is conveniently located for travel across the region. Recently refurbished to a high standard, the office complex now boasts a full-height glass atrium and spacious reception area. To achieve this record was chosen to remove the existing bi-parting sliding doors and replace them with a K32 Full Glass Revolving Door, pass door with a DFA 127 Swing Operator, full screen and linear framework.The K32 Full Glass Revolving Door, with the drive motor under the floor, provides a striking and welcoming entrance that complements the surrounding glass facade and allows natural light to flood into the building. With large, spacious compartments, the K31 can accommodate the constant flow of building occupants, ensuring they can safely and comfortably enter and exit the building at all times, whilst maintaining an airlock into the reception to create an ambient temperature and help reduce heating costs.To complement the record K32, a pass door with a record DFA 127 Swing Operator, which is silent in operation, has been installed to enable a wider opening, for wheelchair users and deliveries of large bulky items as and when required.

Union Industries, the UK’s leading manufacturer of bespoke industrial doors, has helped food importer and distributer, Taj Foods, improve efficiency through the installation of high-speed freezer doors – the Eiger Door.Taj Foods, specialists in frozen exotic food and prepared meals, was established in 1980 and recently expanded its cold storage at its Sheffield warehouse to meet growing demand. The project undertaken by EJM refrigeration, involved improving its energy efficiency and carbon footprint with the installation of a new CO2 refrigeration system.The two Eiger Doors will enhance operational efficiency in the high-demand environment and will maintain consistent freezer temperatures, while ensuring unimpeded access to cold stores.Since its launch in 2002, the Eiger Door has been installed as a fast-access traffic door at major food retailers, 3PL cold storage and distribution, and frozen food manufacturers across the UK.The Eiger Door ensures that consistent temperatures can be maintained and features an innovative dehumidification system, which prevents snow and ice build-up on the door blade and frame. This feature tackles a consistent issue plaguing other door types, as the freezer encounters humid ambient air entering the cold store.Minimising downtime is also supported by the Eiger Door’s robust construction and its tried and tested crash-out and reset system. Due to the modest difference in size between Forklift Trucks and the door opening, as well as the busy nature of this freezer, this is of particular benefit at this depot when considering the long-term reliability of the Eiger Door.Rob Howe, Union Industries’ Technical Sales Engineer, said: “The installation of the Eiger Doors at Taj Foods showcases our commitment to providing cutting-edge solutions that prioritise efficiency and reliability.“Over the past 20 years, the Eiger Door has consistently proven to be a superior and effective innovation for cold storage access, overcoming challenges such as ice build-up and excessive energy use to maintain consistent temperatures.“We are confident that the Eiger Door will significantly contribute to Taj Foods’ operational success.”Anil Solanki, Managing Director at Taj Foods, said: “We were looking for a reliable door solution to fit in with the redevelopment of our Sheffield warehouse, and after reading about the success of the Eiger Door we approached Union Industries to assist us to improve operational efficiency as we doubled our capacity.“We believe that the advanced features of the Eiger Door will not only enhance the efficiency of our cold storage but also contribute to long-term reliability, minimising disruptions in our day-to-day operations.” 

Installation Guide - VEGA 1500 Series Riser Door 

After carrying out a fire door survey, Warwick Hospital undertook measures to protect and refurbish the fire doors throughout their sterilisation unit with Yeoman Shield door protection products.Catering for the sterilisation requirements for all wards and departments within South Warwickshire NHS Foundation Trust as well as GP surgeries and clinics, the department is a hub of activity. The movement of heavily laden trolleys and equipment around the unit had caused impact damage to the department’s doors around door edges, glazing beads and the door fronts. Damage to these particular parts of a fire door can render it unfit for purpose.In this instance Yeoman Shield fired rated door protection products were used to refurbish and then protect from further impact damage. Door edge protectors were fitted to the leading and meeting edges of the doors with door protection panels installed to a height that would shield the most vulnerable areas.For additional protection, particularly to ward off blows to the glazing bead section of the doors, Yeoman Shield’s rub rail was fitted to the face of the door just below the vision panels. Colours of Blue and Red were chosen to distinguish between the contaminated and sterile areas within the unit.Yeoman Shield door protection products come with current and relevant fire certificates and do not affect the integrity of a fire door when installed but will continue to protect from detrimental impact damage for many years to come.Malcolm Bloxham Reactive Supervisor commented “We have used Yeoman Shield for many years and find their door protection products perfect for maintaining our fire doors in good working condition, helping to reduce our door maintenance costs by minimising repair and replacement requirements.”

CASE: Motorised and concealed roller blinds and awnings across sliding doors

Sliding pocket doors are hugely beneficial when designing new or refurbished accommodation for people with disabilities where inclusive design is deemed important. More than 30 sliding pocket door systems and 11 Eclisse Hoist pocket door systems have been installed inside the new building. The Eclisse Hoist pocket door system has meant that a hoist lift can be between rooms to transport the young people from one area to another. Three ECLISSE Hoist pocket door systems have been installed in the physiotherapy area and a motorised lifting system in the pool area.

The Lanark Hydro Electric Scheme is a remarkable project. When it was completed in 1927 it was the first of its kind in the United Kingdom. The Scheme refers to two hydroelectric plants in Clydesdale, South Lanarkshire, Scotland: Bonnington and Stonebyres’ Power Stations. They both take water from the beautiful Falls of Clyde. Bonnington’s water comes from just above the Linn in New Lanark and Stonebyres from above Stonebyres Linn near Kirkfieldbank. The abundant supply of water from the River Clyde continuously spins the power stations’ turbines providing a reliable and sustainable source of renewable electricity. Combined, they create enough electricity to power over 17,000 homes in the UK.  The two stations have been exquisitely refurbished by our client Drax, who acquired them as part of a £702 million deal. Both Bonnington and Stonebyres are category ‘A’ Listed Buildings, the highest possible grading, as a site of national architectural importance. This means it was imperative the new steel windows were as close a match as possible to the originals. The Clement W20 steel window range with genuine T bars, was chosen for the two Power Stations. Polyester powder painted in striking RAL 6005 Moss Green. Lodsworth handles complement the windows with matching peg stays in Antique Bronze finish. Clement made around 120 steel windows for the projects, including nearly 400 individual fixed lights, but the most beautiful is perhaps the enormous curved head windows on both sides of the buildings, which look spectacular and let in masses of natural light.  Drax Group senior civil engineer Anne Kerr said “We are delighted with the service and quality of windows supplied and fitted by Clement. The new steel windows fitted in the refurbished building look stunning and exceed our expectations." 

Situated on Millbank in London, Tate Britain is a tourist hotspotdedicated to the finest British art dating back to the 16th century.The site originally housed the Millbank prison which was the maindeparture point for criminals being sent to Australia. Following thedemolition of the prison, the National Gallery of British Art (Tate Britainas of 2000) was opened in 1897 by Sir Henry Tate, making it the firstof the four Tate galleries.The building has gone through numerous renovations since it’s 19thcentury opening. In 1987, the Clore gallery was opened and wenton to win a Royal Institute of Architects award the following year.More recently in 2006, Caruso St. John architects began a long termdevelopment and renovation project which aimed to create ninenew galleries. The redevelopment featured a number of differentrenovations spanning seven years, whereby Allgood were chosento supply an Ironmongery and an access control solution in the newgalleries.Working on such a prestigious project, it was evident that aestheticswere of paramount importance. The architect desired a unique finishon items, so Allgood worked closely to produce a shot peened finishon some of the stainless steel furniture. To create a clean aestheticon doors which required push plates and signage, Allgood createdan all in one solution by shot peening stainless steel plates, blankingoff areas to create contrasting areasfor signage to be screen printedwithin.Many doors within the gallery space were of traditional archeddesign which caused a challenge on fire doors with self-closingrequirements. Allgood’s solution to this issue was to specify floorsprings combined with projection hinges to provide a specificationthat would self-close in conjunction with the door geometry.Furthermore, to minimise the aesthetic impact of the floor springs,bespoke tile trays with access holes were created to conceal thefloor springs whilst providing easy access for floor spring adjustment.This provided an aesthetically pleasing solution for a very technicalapplication.Having previously worked with the museum on their Mantonshop, Allgoodwere well prepared for this project and the existingrelationship enabled a smooth operation that was completed on timeand within budget.

Installation of Profab Access INTEGRA 4000 Series Riser Doors at 8 Bishopgate

Located in an historic part of Dublin, surrounded by Georgian and Victorian architecture lies One Percy Lane: 3 high-end townhouses. Underneath the curved, zinc roof, the 3 homes have been designed to maximize light and space. Designed to bring serenity in the bustle of the city, each floor connects to the outside with large windows and terraces. Percy Lane features Reynaers CF 77 and CP 155(-LS) sliding and folding door systems, and CS 77 aluminium window systems.

Harleyford Court is a residential building which sits within the London Borough of Lambeth’s Vauxhall Conservation Area. Clement worked closely with Lambeth Planning Authority to agree precise details on the replica replacement steel windows for this red brick building. Clement’s bespoke EB16 steel window range was chosen to replace the existing single glazed fenestration. Despite being fitted with slim 16mm glass units, they benefit from being krypton filled and Part L compliant, offering improved thermal efficiency over that of the original windows.

AluK’s 58BW ST aluminium windows replicate the look of steel frames so successfully that they were approved to replace the original Crittall windows in a landmark redevelopment project which has just been completed in central Birmingham. Herbert House, a 115-year old 52,000 sq ft commercial building in the Colmore business district, has been converted into one of the city’s newest and most prestigious apartment blocks. It features 316 windows in the 58BW ST system and 3 suited doors in the GT55 system, all in a standard AluK Anthracite grey finish.

The Junipers is the first of its kind in the south west of England; offering inpatient support that's closer to home for people with complex mental health needs. The design of the purpose-built unit included input from experts by lived experience and is truly a facility designed with people in mind. When we first discussed the plans for The Junipers PICU with Devon Partnership, we knew it was an opportunity to work together to create a new state-of-the-art ward. After reviewing their options, Devon Partnership chose to install our full doorset range. We worked closely with them before, during and after installation to ensure all of the doors and locksets were operating to help both patients and staff.

GEZE is also a leading provider of door, window and safety technology in the UK. GEZE UK Ltd implemented state-of-the-art door solutions in the John Radcliffe Children's Hospital in Oxford, skilfully combining clinical functionality with a comfortable atmosphere for the young patients.Invisible efficiency: Slimdrive SL sliding door systemsAutomatic glass sliding door system with Slimdrive SL-drives in discreet 70 mm design.The John-Radcliffe Children's Hospital designed by Parry Bowen architects, and built in accordance with the latest hospital architectural standards.. The real eye-catcher of the main entrance is the double-leaf automatic sliding door, with a powerful GEZE Slimdrive SL drive system that works almost invisibly thanks to its construction height of only 70 mm. The Slimdrive SL drive automatic drive fits unobtrusively and elegantly into the contemporary clinic façade, and quietly and efficiently manages thousands of movement cycles every day at the busy children’s hospital."We are delighted by the design of our entrance area. It’s exactly the kind of atmosphere that is expected of a modern children's hospital. The high-quality workmanship makes a key contribution to a comfortable and inviting atmosphere for patients and clinical staff," says Vickie Holcroft, Project Manager at the John Radcliffe Hospital.Automatic swing doors: convenience in the entire clinical areaThe swing door systems from the GEZE TSA drive series are used everywhere in the clinic complex where functionality and ease of access are of particular importance. The automatic TSA 160 door drive ensures light and reliable opening and closing of the automatic doors, even in heavily frequented areas. The TS 4000 overhead door closer provides flexible ease of access at swing doors with manual opening. The closing force of the door closers can be individually set and can be perfectly adjusted to meet the needs of each clinical area. They enable door leaves to be opened with minimal effort, e.g. for children and weak adults. The TSA drives make transportation of beds and/or patients easier for clinical staff.Access control for supervised clinical areasTo safeguard access control to sensitive clinical areas, the swing doors to the operating rooms and intensive card wards were also equipped with a TSA drive with an electromagnetic locking system. This guarantees that only authorised persons can enter these areas.

Our client faced the challenge of transforming a conventional restaurant into a drive-thru establishment without available internal space. In response to their unique requirements, we proposed a comprehensive solution centered around the provision of two separate drive-thru booths. The first booth was designated for payment collection, while the second served as the food presenter window. To expedite the installation process and minimise disruption to ongoing refurbishment works, both pods were meticulously fabricated off-site in our workshop and swiftly assembled on-site.Each drive-thru booth was equipped with a range of featured to optimise functionality and user experience. A notable highlight was the incorporation of a one-piece, large-sized aluminium roof system, providing instant weatherproofing upon installation and ensuring operational continuity regardless of outdoor conditions. Additionally, the pods featured commercial-grade access aluminium doors and large-sized, heavy duty drive-thru windows, meticulously designed to withstand rigorous use while offering ease of operation for end users. By seamlessly integrating functionality, durability, and efficiency, we delivered a turnkey solution that not only met but exceeded our client’s expectations for their drive-thru restaurant conversion project.