NBS Source
I'm a manufacturer

"roofing membranes"

4,024 results found

Sort by:

Showing 361-383 of 383

Sponsored
North London Synagogue - Structural Waterproofing Basement

North London Synagogue - Structural Waterproofing Basement

Delta Membrane Systems Ltd

This project is unusual and offered an interesting scope. Delta was approached to give assistance on designing a robust waterproofing solution to a new build basement within a Synagogue in North London. The main contractor having previously worked with Delta, knew Delta would be able to provide this project with a high calibre waterproofing design whilst offering respect for the community it serves.
Sponsored
Waterproofing vaults (using Type C Systems)

Waterproofing vaults (using Type C Systems)

Delta Membrane Systems Ltd

Vaults are a common feature of 18th and 19th century buildings in Bath. Originally built to support the cobbled streets above and were a constructional response to the precipitous topography that surrounds Bath, in order to provide a level site. Many of the vaults within historic Bath suffer with water ingress and damp related problems. Incorporating best practice guidance - Type C Waterproofing Systems (BS 8102: 2009) a Type C System was used to keep this historic vault watertight and dry.
Sponsored
Flood Recovery – Grade II Listed Building

Flood Recovery – Grade II Listed Building

Delta Membrane Systems Ltd

Delta products were used at ground level on a semi-detached property in Hertfordshire that suffered from severe flooding. After the flood at the Grade II listed property in Long Marston, restoration experts DJ Hutchings of Towcester was called in, and – in turn – they called upon the services of Peter Cox . Work includes the full strip-out of all wall finishes and the solid floor on the ground floor. Mass underpinning took place to all the external walls. Included in the materials supplied by Delta is the MS500 system applied to all ground floor walls and MS20 on the floors.
Sponsored
Type A and Type C Waterproofing - Delta Amphibia

Type A and Type C Waterproofing - Delta Amphibia

Delta Membrane Systems Ltd

The scope of this project was to offer a waterproofing solution to an early 19th century two storey, listed cottage sited in a conservation area of beautiful countryside in Scotland.Providing a guaranteed, cost-effective scheme that would comply with BS 8102:2022 (Protection of below ground structures against water ingress. Code of practice.).For any structure below ground, either fully or partially, waterproofing is essential for protecting and preserving integrity. 
Sponsored
Metal roof and cladding coating using Liqausil's BBA Approved Metalseal

Metal roof and cladding coating using Liqausil's BBA Approved Metalseal

Liquasil Ltd

Metalseal 20 was specified to re-brand a small industrial estate in Swindon. Roofs and external cladding were all stripped of existing finishes using vapour blasting. Cut edge corrosion was treated using SWT Primer and all metal surfaces were coated with BBA Approved Metalseal 20 roof & cladding coating. The finish is now graffiti proof, with any graffiti simply washing off with water, with no ghosting residue. The project is covered by the unique Liquasil latent defects insurance guarantee (including cover for professional design).
Sponsored
IKO Armourplan - Reducing costs and risk on school roofing project

IKO Armourplan - Reducing costs and risk on school roofing project

AccuRoof

As competition for schools construction projects remains high and costs are driven down, the need to meet standards of robustness, energy efficiency and acoustic performance become more challenging. At a school for girls, four roofs totalling over 2000m2 required two different finishes, three different build- ups and, crucially, one single Labour and Materials Warrantee to cover all four under our PI Insurance.
Sponsored
Asbestos cement roof refurbishment project & gutter lining using BBA Approved Asbestoseal

Asbestos cement roof refurbishment project & gutter lining using BBA Approved Asbestoseal

Liquasil Ltd

This is an asbestos cement roof refurbishment project, using the BBA Approved Asbestoseal system from Liquasil. The roof was first cleaned using a steam cleaning machine and all metal fixings were treated with Lqiuasil's SWT Primer. All fixings and cracks were sealed with Non-Sag Sealer before the roof was completely coated with Asbestoseal 20, providing long term protection against the elements. A 10 year Latent Defects Insurance Guarantee was issued upon completion.
Sponsored
East London School

East London School

OptiTec Ltd

One of our latest projects was for a school in Barking, East London. The school required new waterproofing on their roof and chose OptiTec because we have a range of suitable products to choose from, offering excellent durability and longevity at a great price.Specification – Systems UsedFor this project, a long-lasting system was required with a Broof T4 fire classification for safety. Our technical team advised the OptiPlan-FB (PVC Single Ply) system for this project as it met the brief safety-wise, but it’s also excellent value for money over a large area.The OptiPlan-FB system is a fibreglass reinforced, fleece-backed synthetic waterproofing membrane made from premium quality PVC-P, offering exceptional resistance to weather and UV rays. A great benefit of this system is that it can be installed year-round due to having excellent flexibility in cold temperatures.This system was installed by an OptiTec Approved Contractor to ensure the highest quality of fitting with the option for a labour and materials guarantee if required.Challenges PresentedThere were no real challenges presented during installation and everything ran smoothly. We have a technical team on hand at all times to provide support and advice where required so we can always overcome any challenges presented in the best way possible.ResultsThe results of this project are fantastic and the client has expressed their satisfaction with the professional installation of the system and the overall finish.
Sponsored
Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Glazing Vision Ltd

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.
Sponsored
Bury St Edmunds Train Station

Bury St Edmunds Train Station

Tremco | Roofing – a brand of Tremco CPG UK Ltd

Bury St Edmunds Train Station required building envelope works due to the ageing condition of Grade II listed building managed by Walker Construction. A significant issue was water damage caused by water ingress through an inefficiently waterproofed roof, invasive plant species growing through brickwork, and debris around drainage points.The solution:AlphaGuard PUMA Liquid Applied Flat Roof System
Sponsored
Metal Roof Coating Project using BBA Approved Metalseal 20 from Liquasil

Metal Roof Coating Project using BBA Approved Metalseal 20 from Liquasil

Liquasil Ltd

This is an installation of the BBA Approved Metalseal metal roof coating system from Liquasil Ltd. The project is in North Shields and involved removing the delaminating factory finish, treating the cut edge corrosion and then coating the whole roof in Metalseal 20, in Goosewing Grey.
Sponsored
M-Tray® Instant Green Roof - The May Fair Hotel

M-Tray® Instant Green Roof - The May Fair Hotel

Wallbarn Ltd

Mayfair, London Our modular green roof solution, the M-Tray®, has transformed what was previously a fairly unsightly bitumen rooftop at a Mayfair hotel into a beautiful green space for guests to enjoy. Conversion of the 13sqm space was awarded to Wallbarn after we successfully completed the hotel group’s first green roof project at the Radisson Heathrow. Being so easy to transport our M-Trays®were selected as the fastest and most efficient way of converting the unused space into a lush, green and aesthetically-pleasing space. The installation only took half a day with minimal disturbance to guests.
Sponsored
Coordinated furniture for local authority roof terrace

Coordinated furniture for local authority roof terrace

Furnitubes International Ltd

New development Colindale offices is recently home to London Borough of Barnet staff and community facilities. Furnitubes has supplied 6 table and bench sets and a further 7 independent benches from the RailRoad Inline range, with ‘Delta’ supports that can be readily bolted down to the decking of the new roof terrace located on the 4th floor. Eleven RailRoad planters have been placed in the gravel margins to perfectly compliment the nearby seating, and planted with contemporary box topiary balls.
Sponsored
Replacing an Original 1949 Roofing Waterproofing System Including New Rooflights

Replacing an Original 1949 Roofing Waterproofing System Including New Rooflights

Iko Ireland

Perry Hall Academy, a large primary school built in 1949, with original waterproofing still in-situ. IKO assisted the Academy funding bid by providing a detailed survey report, including intrusive core sample analysis. The roofs were suffering from water ingress, cracks in the mastic asphalt, pooled water and poor heat retention, so decision was made to replace the roofs throughout. New rooflights were also specified to allow more natural light in while the design chosen reduced the external noise transmission. IKO worked with specifier Concept Education Services to deliver the project (some work during term-time) within 6 months.
Sponsored
Bespoke Sliding Over Roof Rooflight For Concrete Frame House Building

Bespoke Sliding Over Roof Rooflight For Concrete Frame House Building

Glazing Vision Ltd

Bespoke Sliding Over Roof Rooflight For Concrete Frame House Building Case Study
Sponsored
IKO Armourplan - collaboration completes roof to £185m project in four months

IKO Armourplan - collaboration completes roof to £185m project in four months

AccuRoof

In less than four months, SIG Design & Technology, IKO Polymeric and FK Group have completed a 48,000m2 roofing project for one of the biggest online grocery centres in the world. An incredibly tight programme minimised material waste and time on site, thanks to a number of innovations developed specifically for the project by the three businesses working collaboratively.
Sponsored
CEMBRIT BBA CERTIFIED SLATES TAKE CARE OF ROOFING AT A NEW RETIREMENT VILLAGE IN OXFORDSHIRE

CEMBRIT BBA CERTIFIED SLATES TAKE CARE OF ROOFING AT A NEW RETIREMENT VILLAGE IN OXFORDSHIRE

Swisspearl

Westerland and Moorland, BBA certified fibre cement slates from Cembrit, have helped achieve a Code for Sustainable Homes and a BREEAM ‘Very Good’ rating for a newly built £30 million retirement village in Oxfordshire.Built by BAM Construct UK and due for completion in December 2016, the project is built in an attractive, traditional style which is complemented by Cembrit’s Westerland and Moorland slates. Based in Hertfordshire, BAM Construct UK worked with roofing specialist Attleys Roofing Ltd on the project.
Sponsored
Reducing noise break-in issue on new school roof, Chester

Reducing noise break-in issue on new school roof, Chester

Hush Acoustics

Hush Acoustics provided an effective solution to ‘noise break-in’ at a newly built primary school in Chester to ensure the internal acoustic environment was supportive of learning goals.The Huntington Primary school was designed by Cheshire West and Chester Council to cater for 420 primary age pupils and a 26-provision nursery. The former primary schools it replaced had a capacity of 120 children, but to cope with the demand of 1,200 new houses being built nearby on the former Saighton Army camp, the decision was made to build a new school to meet the requirements.An acoustic concern highlighted was ‘noise break in’ which is caused by issues such as the sound of rain falling onto the roof, which in turn would detract from the learning environment. In order to resolve this potential issue and to guarantee the children a healthy setting free from noise disturbance, we specified our Hush 10kg Barrier Mat to be installed in the roof of the building.Hush Barrier Mat is a vinyl sound barrier mat loaded with naturally occurring minerals. The product is free of lead, unrefined aromatic oils and bitumen. Designed to improve the sound insulation of existing panels of metal, wood, plastic etc., at all frequencies. The mat is normally fixed in intimate contact with the original panel. Hush barriers are particularly effective in overcoming coincidence dip resonance found in stiff lightweight composites such as plywood sheets and hollow core panels.Working alongside Kier, were Delta Group, who we supplied with 1100 sheets of our Hush 10 kg Barrier Mat. They then applied this to the roof of the school in 3x layers, to give a mass of 30 kg/m2 and improving acoustic performance across all frequencies.
Sponsored
Loft ladders solutions for a truss roof

Loft ladders solutions for a truss roof

Premier Loft Ladders Ltd

Truss roof rafters and ceiling joists are typically spaced either 400mm, 450mm or 600mm apart. Given that the joist is normally 50mm wide, this gives a fairly small opening width for your loft hatch and ladder. However, there are still a wide variety of options to consider. For example, space saving concertina loft ladders, are easy to operate, providing robust and durable access to an attic. Made-to-measure folding wooden loft ladders, such as the new Quadro, are available for widths of 550mm and offer minimal protrusion in the loft space above. Visit our website for more information.
Sponsored
Metal Roof Refurbishment Project Using BBA Approved Metalseal by Liquasil ltd

Metal Roof Refurbishment Project Using BBA Approved Metalseal by Liquasil ltd

Liquasil Ltd

This is a metal roof coating & refurbishment project using Liquasil's BBA Approved Metalseal 20. The project involved removing an existing cut edge corrosion treatment and re-treating with Liquasil SWT Corrosion Primer, followed by two coats of Metalseal. The whole roof was then coated with Metalseal 20 to provide long term protection against fungal growth and weathering. The unique 10 year, single-point latent defects insurance guarantee was issued at the end of the project. For details, speak to our building surveyors on 0121 709 5352
Sponsored
IKO PermaTEC hot melt - roofing at a groundscaping scale at 5 Broadgate

IKO PermaTEC hot melt - roofing at a groundscaping scale at 5 Broadgate

AccuRoof

When Make Architects needed a waterproofing solution for their latest project in the City of London they turned to IKO PermaTEC hot melt. Waterproofing such an expansive and complex roof has its particular challenges and required robust and reliable detailing. The choice of waterproofing was to perform for a minimum of 30 years, be cost effective and also contribute towards the building’s design stage BREEAM Excellent rating.
Sponsored
Hydrostop AH-25 liquid roofing offers fast track solution at Gatwick Diamond “Blue-Light” offices

Hydrostop AH-25 liquid roofing offers fast track solution at Gatwick Diamond “Blue-Light” offices

AccuRoof

Hydrostop AH-25 liquid roofing was chosen as a better alternative to built-up roofing for installation to a new build Surrey County Council office development. The Hydrostop AH-25 system was applied over a concrete substrate with a bituminous vapour control layer with Eurodeck liquid roofing board and cut to falls insulation.
Sponsored
Clapton Villa | Green-roofed, timber clad extension to a Victorian villa - Clapton, London

Clapton Villa | Green-roofed, timber clad extension to a Victorian villa - Clapton, London

IDSystems

Architect: Scenario Architecture. This beautiful Victorian villa received an innovative green-roofed extension full of natural light thanks to IDSystems installed bifold doors, gable end glazing, rooflights, window and door. The challenge for Scenario Architecture was to design an extension that was filled full of natural light, took into account the changing floor levels of the property. Under the pitched roof, the gable end glazing has been designed to perfectly match the profiles of the SUNFLEX SF75 bifold doors, whilst the inclusion of a single access door allows the extension to angle away to create a larger kitchen/dining area.

Showing 361-383 of 383

Feedback